• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.213-216
• /
• 2007

LGP (light guide plate) of LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of the major components which affects the product quality of LCD. In the present study, the optical patterns of LGP(2.2") are manufactured by three different methods, namely, laser ablation, chemical etching and LiGA - reflow, respectively. The pattern surface images and roughness of mold and product were compared to check the optical characteristics. From the results of measurement the optical patterns fabricated by LiGA - reflow method showed the best geometric structure as intended in design and the lowest roughness among those.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.317-318
• /
• 2007

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.58-68
• /
• 2017

According to the development of optical technology, the capacity of LIDAR equipments has been greatly improved to get rock mass characteristics precisely and accurately enough and it has been lightened and popularized so that it can be easily used in the field. In this study, we examined the applicability of roughness measurement for joints in a rock slope using LIDAR technique. A triangular irregular network was constructed using LIDAR and a patch, which is a plane structure of discontinuity on rock mass measured from LIDAR scanning, was extracted to estimate the roughness of the rock slope. Four different kinds of roughness parameters were analyzed to find out their correlation with JRC for various point intervals. Among them, $R_s$ parameter was used to measure the roughness of a patch. Regression analysis between four roughness parameters and JRC with respect to point interval was performed. All the roughness parameters decreased with the increase of point interval. In addition, the parameter value showed greater decrease for rougher surfaces. A method of roughness measurement using $R_s$ parameter on rock slope discontinuities was suggested which showed slight overestimation of the real roughness value.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.61-68
• /
• 2006

This paper is to investigate the influence of the endface quality on the loss characteristics of a plastic optical fiber(POF) connector and the stability of new designed sleeve for in-car network service. Using the parameters of the surface roughness and applied load, insertion loss of connector is measured. Endface condition for optimizing the connection is presented by the surface roughness satisfying loss criteria and the stress for minimizing the loss, $R_{rms}=8nm$ and 19 MPa, respectively. By vibration test and dynamic loss measurement, we show the stability of the new designed sleeve.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.2
• /
• pp.10-15
• /
• 2005

For the development of compensation machining program, ultra precision grinding used in ultra precision machine and corrective machining was studied. We explored a new rough grinding technique on optical material such as zerodur. The facility used is a polishing machine with a custom grinding module and a range of diamond resin bond wheel. Surface roughness and form accuracy are measured by surface measurement equipment(Form Talysurf series2). Our compensation machining program has complied with a target of producing surface roughness better than $0.05{\mu}m$ Ra and form accuracy of around $0.05{\mu}m$ Rt and has been unveiled as a work-hour model.

• Journal of the Korean Society of Safety
• /
• v.9 no.3
• /
• pp.41-52
• /
• 1994

This paper deal with the design of noncontact In-process measurement system which measures the surface roughness during cylindrical grinding. The measuring system is extremely simple and the apparatus proposed is composed of a laser unit, photodetector and optical system. The experimental performance of the apparatus is satisfactory and good results are expected in the actual use. During operation, the surface of a workpiece Is continuously scanned by a laser beam. The experimental results show that the presence of chattering, loading and glazing can be detected sensitively along both circumferential and feed directions and the surface roughness value is obtained from the reading along the feed direction.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.75-84
• /
• 2001

The reliable data relating to the condition of road surface is of increasing importance to deliver the road condition to driver and road management authority. This paper describes the development of a new high-speed. automatic, road data collection system, which collects the longitudinal road data with ${\sim}30cm$ interval covering full width of the road at 100km/h speed. The system calculates the international roughness index (IRI) from the collected data and displays the IRI and road profile data on the screen. To develope the system, we implement an optical range finder, advanced distance and motion detectors, and signal processing and display modules. The measurement accuracy of the system at 70km/h operation speed shows ${\pm}0.1m/km$ in the IRI for the standard road. To confirm the performance of the developed system, we also measure the IRI of a deployed highway road and compare the results with a conventional system and human eye measurement results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.427-428
• /
• 2008

In this paper, we propose an BRDF measurement method based on laser light scattering, which is very effective for roughness measurement. The measurement setup has a very simple configuration, which consists of a collimated green laser, a detector. The experimental tests show that the BRDF measurement has difference between good Au Pad and bad Au Pad.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.134-140
• /
• 2009

In this study, the influence of surface roughness on light scattering from Au pads on a PCB surface was investigated. Angular distributions of light scattered from Au pads with different surface roughness were measured for several incident angles. Diffusely-scattered light could be separated by using the fact that the amount of specularly-scattered light was directly related to surface roughness. The separated diffuse term was curve-fitted with a physics-based model, and then the related scattering parameters were extracted and compared with measured parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.64-71
• /
• 2005

In order to measure surface roughness profile, stylus type equipments are commonly used, but the stylus keeps contact with surface and damages specimens by its tip pressure. Therefore, optics based measurement systems are developed, and light phase interferometer, which is based on light interference phenomenon, is the most noticeable research. However, light interference based measurements require translation mechanisms of nano-meter order in order to generate phase differences or multiple focusing, thus the systems cannot satisfy the industrial need of on-the-machine and in-process measurement to achieve factory automation and productive enhancement. In this research, we focused light reflectance phenomenon rather than the light interference, because reflectance based method do not need translation mechanisms. However, the method cannot direct]y measure surface roughness profile, because reflected light consists of several components and thus it cannot supply surface height information with its original form. In order to overcome the demerit, we newly proposed an image processing based algorithm, which can separate reflected light components and conduct parameterization and reconstruction process with respect to surface height information, and then confirmed the reliability of proposed algorithm by experiment.