• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.17-20
• /
• 1999

In these days, wavelength division multiplexing(WDM) all-optical network are being deployed to support various multimedia communication services. In this paper, various WDM all-optical network are discussed, and a design of an all-optical backbone network has been proposed by using multiple self-healing ring technology. The proposed multiple self-healing ring network improves network expandability and efficiency of bandwidth, while it retains simplicity and ease of network control, which are from the nature self-healing ring. Using PDI traffic modeling technique, a well-balanced all-optical backbone network using multiple self-healing ring is designed for the 2010s in Korea.

• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.69-78
• /
• 2006

In this paper, we presents the efficiency and a transmission quality of the system which is composed of the optical elements from physical layer of the active optical ring network. For a simulation it will use the Transmissionmaker WDM and it will be able to observation a optical transmission quality of the optical transmission system. The active optical network is composed of two rings(main ring and sub-ring). It measures the BER(Bit Error Rate) quality which it follows node number from the sub ring and physical distance of the node. Performance analysis from the physical layer becomes the standard of the plan for the efficiency optimization of the active optical ring network. Consequently it will be able to compose the efficient optical transmission system which reflects the physical distance, a traffic demand quantity of each node and a number of users from actual network.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.23-26
• /
• 2018

Optical-layer restoration has been demonstrated with a wavelength-blocker (WB) -based reconfigurable optical add/drop multiplexer (ROADM). Two $2{\times}2$ optical switches with a control circuit were placed before and after a WB-based ROADM to provide automatic path restoration under fiber-failure conditions. Using the proposed node configuration, a 3-node self-healing ring (SHR) network has been implemented to demonstrate the feasibility of the automatic optical-layer restoration. From the results, the restoration time was measured to be ~4 ms under fiber-failure conditions, without any additional power penalty in receiver sensitivity.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.386-389
• /
• 2003

This paper proposes the architecture of a multiple ring based optical network with single hop between edge nodes using either the concept of circuit switching or multi-wavelength label. The structure of the multi-wavelength label, be shown through the single wavelength-band and the multiple wavelength-band that can reduce number of ring. To avoid the collision of the optical packets at an outward port, we proposed the dynamic allocation scheme of the outward optical packets based on the fiber do]ay lines(FDLs).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2382-2392
• /
• 2014

In this paper, a new data frame structure for wavelength routing in optical ring access network(ORAN) is designed and the functions of each field in the frame are defined. In addition, the IP packet transmission to the network layer corresponding to the newly proposed structure of the protocol stack is newly presented. Tha data transmission protocol design techniques of ORAN was proposed. IP packet and broadcasting packet transmission within the sub-network, and the IP packet transmission to other sub-network was shown through the process illustration. In the process, the encapsulation and framing process of the wavelength information to routing has been described in detail. And each step takes place in a packet transfer process is demonstrated. A ring type optical access network protocol is not yet research field. ORAN data transfer protocol to send/receive module structure of a subscriber node and a control node of the two rings which analyzed the results are shown. The high-speed Internet solution is proposed that by using wavelength routing the packet transport protocol for ORAN is designed.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.193-198
• /
• 2019

We propose a novel method to design a dispersion map for a WDM (Wavelength Division Multiplexing) ring network with the capability of wavelength reconfiguration. The method is simple, but gives us an optimum set of DCMs (Dispersion Compensation Modules) which satisfies a given value of the tolerable residual dispersion. The proposed method does not depend on compensation method, fiber type, or modulation format. We also demonstrate numerically how it works with an example 10-node ring network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.159-169
• /
• 1994

A multichannel optical slotted ring network is designed using a wavelength division multiplexing(WDM) technique and photonic packet switching devices. The electronics speed bottleneck is removed out of the ring, which allows utilization of the full bandwidth for the optical fiber transmission medium. The ring channel adopts a slotted ring concept with a destination cell remove strategy for the eing access mechanism. The slot size in the ring is selected as the same as that of ATM based cell in order to be used as B-ISDN Access Networks. In this paper, we devised a mathematical method to measure the average transfer delay characteristics of the network. The analytical method turned out to yield accurate results over a broad range of parameters in comparison to simulation results. From the study, we observed the average transfer delay of the network as the network parameters vary.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.69-78
• /
• 2004

This paper proposes architecture and characteristics of a multi-ring based optical network with single-hop between edge nodes using the concept of circuit switching and multi-wavelength label switching to solve delay problem caused by applying crossconnectors as transit nodes in the wavelength division multiplexing(WDM) network. We suggest multi-ring based architecture composed single and multiple wavelength-bands with multi-wavelength labels, and analyze characteristics of two models. To avoid the packet collision in output ports of edge nodes due to output contention, the static and dynamic allocation scheme, which packets are allocated in time slots, is provided. Based on our analysis, it shows that delay only occur in not core nodes but edge nodes in the proposed architecture. In addition, we evaluate the probabilities of delay, packet loss, and call blocking in the proposed optical packet network.