• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1469-1478
• /
• 2018

Earthquakes and volcanic eruptions are disaster that causes billions of dollars in property damage and the loss of human life. Therefore, it is required to effectively monitor earthquakes and volcanoes. With the increase of satellite data, researches on earthquake and volcano using satellite imagery has been improved. Satellite images can be divided into three types i.e. optical, thermal, Synthetic Aperture Radar (SAR) and each image has different characteristics. In this article, we summarized its advantages and disadvantages of each type of satellite image. Moreover, we investigated the previous researches about earthquake and volcano using satellite images. Finally, we suggest application method to respond earthquake and volcano disaster using satellite images.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.607-615
• /
• 2017

The aerosol optical thickness data retrieved by Moderate Resolution Imaging Spectrometer (MODIS) of Terra & Aqua and Meteorological Imager (MI) of Communication Ocean and Meteorological Satellite (COMS) are analyzed and compared with the measurement data of Aerosol Robotic Network (AERONET) in Northeast Asia. As the result, the aerosol optical thickness retrieved by MODIS and MI were well agreed at ocean region but quite different at cloud edge and barren surface. The reason was that MODIS aerosol optical thickness was retrieved using the visible and infrared channels but MI was retrieved with the visible channel only. Consequentially, the thin cloud be misinterpreted as aerosol by MI and the difference between MODIS and MI aerosol optical thicknesses could be occurred with Normal Distribution Vegetation Index (NDVI) and land surface property. Therefore, the accuracies of clear/cloud region and surface reflectivity are required in order to improve the aerosol optical thickness algorithm by MI.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.593-596
• /
• 2005

The MSC is a remote sensing instrument with very high performance that is to be installed on KOMPSAT2 satellite. The MSC consists of EOS (Electro-Optic Subsystem), PMU (Payload Management Unit) and PDTS (Payload Data Transmission Subsystem). PMU controls and monitors all the other payload units by sending commands and collecting telemetry. PMU is in charge of interfacing between payload system and satellite bus system. PMU gets commands from ground-station via OBC (On-Board Computer) that is a main controller of the satellite bus system and sends telemetry to the ground-station via OBC. There is a processor module, called SBC (Single Board Computer) in the PMU. The SBC is a main controller of the MSC system. The main roles of the SBC are payload mission management, command validation and execution, telemetry collection and monitoring, ancillary data handling, event reporting, power control of payload sub-units and communication with these units. Intel's 80486DX2 processor has been used for the SBC. Due to the fact that the SBC plays important roles for imaging mission execution and handles a lot of control data that is required for payload operation, it is required to make analysis of the CPU load when it is in maximum operation mode. In this paper, the analysis and measurement results of the SBC throughput in the maximum operation mode.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.5
• /
• pp.375-384
• /
• 2001

Optical remote sensing techniques are particularly advantageous over the conventional fixed point methods because with these methods large-area monitoring can be possible and sample preparation difficulties are avoidable. Instruments based on the differential optical absorption spectroscopy (DOAS) technique are widely used for monitoring air pollutants in urban areas in recent years. In this study, $O_3$, SO$_2$, NO$_2$, and VOCs (benzene, toluene, xylene, and styrene) are measured continuously at Sihwa industrial area using a DOAS from February to November. 1999. Intercomparison between the DOAS method and the conventional methods (filed point samplers for $O_3$, NO$_2$, and SO$_2$, and adsorbent sampling methods and gas chromatography for VOCs) are performed simultaneously at the same site. The time series of the DOAS data and that of fixed point method show good match at the view point of the tendency, but the absolute concentration values of these two methods differ quite a lot from each other; correlation coefficients shows 0.78 for $O_3$and 0.97 for SO$_2$. However, the results of VOCs measurements are not quite satisfactory ; the spectral interference with $O_2$and $O_3$appears to be the major cause of the errors for VOCs .

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.3
• /
• pp.162-168
• /
• 2017

Shallow-water bathymetry survey has been conducted using high definition color images obtained at the altitude of 100 m above sea level using a drone. Shallow-water bathymetry data are one of the most important input data for the research of beach erosion problems. Especially, accurate bathymetry data within closure depth are critically important, because most of the interesting phenomena occur in the surf zone. However, it is extremely difficult to obtain accurate bathymetry data due to wave-induced currents and breaking waves in this region. Therefore, optical remote sensing technique using a small drone is considered to be attractive alternative. This paper presents the potential utilization of image processing algorithms using multi-variable linear regression applied to red, green, blue and grey band images for estimating shallow water depth using a drone with HD camera. Optical remote sensing analysis conducted at Wolpo beach showed promising results. Estimated water depths within 5 m showed correlation coefficient of 0.99 and maximum error of 0.2 m compared with water depth surveyed through manual as well as ship-board echo-sounder measurements.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.369-372
• /
• 2006

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.942-942
• /
• 2006

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.171-176
• /
• 2007

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.9-13
• /
• 1998

• Korean Journal of Remote Sensing
• /
• v.30 no.2
• /
• pp.173-183
• /
• 2014

Field survey research on damages caused by volcanic activities has plenty of difficulties due to human resources, safety and costs issues. Remote sensing application using satellite image is one of very useful tools to overcome those issues. In this study, we monitored the volcanic activities of Sinabung volcano in 2010, which is located in Sumatra island, Indonesia by using Landsat 7 ETM+ satellite images acquired on 17 April, 2009 and 30 July, 2012. We found that the area of pyroclastic flow inundation after 2010 has been tripled roughly, since extracting the pyroclastic flow inundation before and after 2010 eruption from classification. The result from modeling of pyroclastic flow inundation has been compared with the extracted pyroclastic flow inundation from Landsat 7 ETM+ images. As a result, we confirmed that the length of inundation area from the modeling was calculated to 92% accurate, but the width of inundation area was somewhat imprecisely estimated in the volcanic area having the sharp slope and only calculated to 17% accurate.