• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.223-223
• /
• 2009

In this paper, designed and simulated Power Splitter (PS) integrated Mach-Zehnder interferometer (MZI) based planar type optical waveguide devices (which is called here a PS-MZI). The PS-MZI optical waveguide sensor was preceded by a Y-junction, which splits the input power between the sensor, and a reference branch, to minimize the effect of optical power variations. The PS-MZI optical waveguide sensor induced changing phases of the incident beam, which had fallen upon the waveguide through computer simulation, according to the small changes in the index of refraction, thus beam intensity was changed. The waveguide were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of PS-MZI optical waveguide sensor was performed by a conventional planar lightwave circuit (PLC) fabrication process. The PS-MZI optical waveguide that was fabricated to be applied as a biosensor revealed a low insertion loss and a low polarization-dependent loss. After having etched the over-clad at the sensor part in the MZI optical waveguide that was fabricated, Ti deposition was made on the adhesion layer, and then Au thin-film deposition was carried out thereon. In addition, its optical properties were measured by having changed the index of refraction oil at the sensing part of the MZI. To apply the planar type PS-MZI optical waveguide as a biosensor, a detection test for Staphylococcus aureus was conducted according to changes in concentration, having adopted Ti-alkoxide as ligand. The detection result of the S. aureus by the PS-MZI optical waveguide sensor was possible to the level of $10^1$ CFU/ml.

• Current Optics and Photonics
• /
• 제3권2호
• /
• pp.172-176
• /
• 2019

The work reports on the fabrication of an optical planar waveguide in the Nd:CNGG crystal by the 0.4-MeV hydrogen ion implantation with a fluence of $8.0{\times}10^{16}ions/cm^2$. The nuclear energy loss of the implanted hydrogen ions was derived by using SRIM 2013 code. The microscope image of the proton-implanted Nd:CNGG crystal cross section was captured by a metallographic microscope. The transmittance spectra were recorded before and after the ion implantation. The light intensity distribution of the planar waveguide at 632.8 nm was experimentally measured to validate its effect on one dimension confinement. The investigation shows that the proton-implanted Nd:CNGG waveguide is a candidate for an optoelectronic integrated device.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.290-297
• /
• 2010

The paper reviews progress and future prospects of two kinds of planar waveguide devices; they are (a) silica and silicon photonics multi/demultiplexers for communications and signal processing applications, and (b) a novel waveguide spectrometer based on Fourier transform spectroscopy for sensing applications.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.53-65
• /
• 1998

Planar lightwave circuits (PLCs) provide various important devices for optical wavelength division multiplexing (WDM) systems, subscriber networks and etc. This paper reviews the recent progress and future prospects of PLC technologies including arrayed-waveguide grating multiplexers, optical add/drop multiplexers, programmable dispersion equalizers and hybrid optoelectronics integration technologies.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.309-319
• /
• 2001

This paper demonstrates the development of optical temperature sensor based on the etched silica-based planar waveguide Bragg grating. Topics include design and fabrication of the etched planar waveguide Bragg grating optical temperature sensor. The typical bandwidth and reflectivity of the surface etched grating has been ∼0.2nm and ∼9%, respectively, at a wavelength of ∼1552nm. The temperature-induced wavelength change is found to be slightly non-linear over ∼200$^{\circ}C$ temperature range. Typically, the temperature-induced fractional Bragg wavelength shift measured in this experiment is 0.0132nm/$^{\circ}C$ with linear curve fit. Theoretical models with nonlinear temperature effect for the grating response based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• 한국광학회지
• /
• 제10권5호
• /
• pp.419-423
• /
• 1999

측면 연마된 단일모드 광섬유와 다중모드 폴리머 평면도파로 사이의 소산장 결합을 이용한 광필터를 제작하고 그 특성을 측정하였다. 소자의 편광의존성을 줄일 수 있는 방법 제안하였으며 실험으로 검증하였다. 그리고 광필터의 공진파장과 여과 깊이는 평면도파로의 두께와 연마깊이로서 적절히 선택할 수 있음을 실험으로 보였다. 광섬유 연마과정, 폴리머 평면도파로 제작 등을 포함한 소자제작 공정을 소개하였다. 제작된 광필터의 3㏈대역폭은 15nm, 삽입손실은 0.2㏈, 편광에 따른 공진 파장의 차이는 2nm 이하였다. 그리고 주위온도에 의한 공진파장의 이동거리는 -0.35nm/$^{\circ}C$로 측정되었다.

• Journal of the Optical Society of Korea
• /
• 제8권3호
• /
• pp.137-146
• /
• 2004

A new method of obtaining the eigenmode of an anisotropic planar waveguide is studied. The planar waveguide can be composed of an arbitrary number of isotropic or uniaxially anisotropic layers, provided all the optical axes arc lying in the incidence plane. Since the equation of motion for the TE mode is not different from that for the TE mode in an isotropic planar waveguide, only the equation of motion for the TM mode is of any concern. For this kind of device structure, the Maxwell's equations can be solved for one component of the electric field and one component of the magnetic field. The resulting coupled set of equations is linear in the propagation constant and the eigenmode can be easily obtained using canned numerical routines.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.253-256
• /
• 2000

We report the experimental results for the coupling properties of the an side-polished single-mode fiber covered with metal-clad planar waveguide. The experimental results show that the large birefringence of a metal-clad planar waveguide facilitates the effective separation of TE and TM polarization in the spectral domain. Additionally the resonant wavelengths of the device are tuned based in the thermo-optic effect of polymer planar waveguide.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.121-129
• /
• 2001

본 논문은 식각된 평면 광도파 브래그 격자를 이용한 광온도 센서의 개발에 대한 연구로써 식각된 평면 도파로 브래그 격자의 설계, 제작, 격자 특성 연구 및 온도 측정 가능성을 주 연구 목적으로 하고 있다. 평면 식각 브래그 격자 센서의 전형적 대역폭과 그 반사도는 각각 ~l,522nm의 파장에서 ~0.2nm와 ~7%이며, 20$0^{\circ}C$까지 온도가 변화하는 동안 온도 변화에 따른 브래그 파장의 변화는 약간의 비선형성을 보였다. 광도파로와 판변형이론에 기초한 브래그 격자의 온도 변화에 따른 광파장 응답을 예측하기 위한 이론적 모델은 실험과 비교할 때 허용 오차내에서 잘 일치하고 있다.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.162-165
• /
• 2008

A novel planar lightwave circuit(PLC) triplexer using a three-waveguide interferometer(TWI) is proposed and examined using the transfer matrix and the beam propagation methods. The proposed triplexer consists of two three-waveguide couplers and three waveguides connecting the couplers. Simulation for the TWI triplexer shows the excess losses of 0.03 dB and 0.94 dB with the crosstalks of -22.3 dB and -14.5 dB in reception, respectively, for the wavelength of 1490- and 1550-nm, while showing the excess loss of 1.75 dB in transmission for the wavelength of 1310 nm. The proposed design shows compact feature as short as 11.5 mm for the refractive-index contrast of 0.45%.