• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.91-98
• /
• 1991

Electrical conductivity of poly (3-alkylthiophene) derivatives with substituted long alkyl chain such as poly (3-butylthiophene), poly (3-hexylthiophene), poly (3-octylthiophene), poly (3-decylthiophene), poly (3-dodecylthiophene), and poly (3-docosylthiophene) increases with increasing temperature. However, after attaining a maxiumum value, it decreases with further temperature increase. Hysteresis is also observed in the temperature dependence of conductivity and absorption spectra. The absorption spectra also changes rapidly at the phase transition. These phenomena are discussed in terms of the increase of the energy band gap in the liquid states due to the decrease of co-planarity of thiophene rings accompanied by remarkable conformation changes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.17-19
• /
• 1991

Pastes consisting of $CdZnS_{1-y}Te_{y}$ powder, 20wt/o of $CdCl_2$as a sintering aid and appropriate amount of Propylene Glycol(P.G) have been coated on glass substrates and were sintered at the temperature of $625^{\circ}C$ to find energy band gap, transmittance and electrical properties of the sintered films. The resistivity of sintered film increases with increasing Te content. X-ray diffraction patterns show that $CdZnS_{0.9}Te_{0.1}$ sintered film is in the single film in the two phase region. The transmittance of the sintered film decreases with increasing the Te content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.84-89
• /
• 1992

The polycrystalline $CuInS_2$ thin films are prepared by vacuum heat treatment of layer, which is deposited by vaccum evaporation in order. The electrical and optical properties of the films are investigated at various sulfur deposition mole rate, substrate temperature, heat treatment temperature and time. From data, n type-$CuInS_2$ exhibits resistivity, transmittance and energy band gap with 142[${\Omega}{\cdot}cm$], 73[%], and 1.5[eV] respectively at optimum fabrication condition. Finally, the films are fabricated with chalcoprite structure.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권1호
• /
• pp.17-22
• /
• 2001

The floating-gate MOSFETs were fabricated by employing 1.5 m n-well CMOS process and their optical-electrical properties were characterized for the application to CMOS image sensor system. Based on the simulation of energy band diagram and operating mechanism of parasitic BJT were proposed as solutions for the increase of photo-current value. In order to realize them, MOSFETs having multi-gate and channel structures were fabricated and 60% increase in photo-current was achieved through enlargement of depletion layer and parallel connection of parasitic BJTs by channel division.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.192-196
• /
• 2011

The multi-layered thin film with an ITO/Ag/ITO structure was produced on PET by using magnetron reactive sputtering method. First, 30 nm of ITO thin film was coated on PET by using normal temperature process. Then 20-52 nm of the Ag thin film was coated. Lastly, 30 nm of ITO thin film was coated on Ag layer. The sample of the 20 nm Ag thin film showed more than 70% transmission and a $2.7{\Omega}/{\Box}$ sheet resistance. When compared to the existing single-layered transparent conducting thin film, multi-layered film was found to be superior with about $5{\Omega}/{\Box}$ less sheet resistance. However, since the Ag layer became thinner, the band gap energy needs to be increased to more than 3.5 eV.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.47-52
• /
• 2021

고주파 마그네트론 스퍼터링으로 증착된 ~185 nm 두께의 ITO막을 습도 100%에서 열처리하였다. 온도 200 ℃, 250 ℃, 300 ℃, 350 ℃, 400 ℃ 및 450 ℃에서 각각 4시간 동안 열처리하였다. 고습 열처리에 따른 저항률, 전자농도 및 이동도 변화를 조사하였다. XRD결과로 스트레스 변화를 계산하였으며, FESEM 사진을 통해 ITO막의 표면형상을 관찰하였다. 광투과율을 측정한 후 에너지 밴드 갭을 구하였으며, Burnstein-Moss 효과와 비교 및 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.228-231
• /
• 2006

This paper briefly introduces silicon based thin film solar cells: amorphous (a-Si:H), microcrystalline ${\mu}c-Si:H$ single junction and $a-Si:H/{\mu}c-Si:H$ tandem solar cells. The major difference of a-Si:H and ${\mu}c-Si:H$ cells comes from electro-optical properties of intrinsic Si-films (active layer) that absorb incident photon and generate electron-hole pairs. The a-Si:H film has energy band-gap (Eg) of 1.7-1.8eV and solar cells incorporating this wide Eg a-Si:H material as active layer commonly give high voltage and low current, when illuminated, compared to ${\mu}c-Si:H$ solar cells that employ low Eg (1.1eV) material. This Eg difference of two materials make possible tandem configuration in order to effectively use incident photon energy. The $a-Si:H/{\mu}c-Si:H$ tandem solar cells, therefore, have a great potential for low cost photovoltaic device by its various advantages such as low material cost by thin-film structure on low cost substrate instead of expensive c-Si wafer and high conversion efficiency by tandem structure. In this paper, the structure, process and operation properties of Si-based thin-film solar cells are discussed.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1555-1562
• /
• 2015

금속 산화물 반도체는 독특한 전기 광학적 특성, 높은 표면적 등으로 인해 태양전지, 센서, 광소자 및 디스플레이 등 여러 분야에 걸쳐 응용되고 있다. 금속 산화물 가운데 우수한 물리 화학적 특성을 가지는 산화아연은 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 큰 엑시톤 결합에너지를 갖는 n-형 반도체로서 산화아연에 양이온을 도핑하여 전기 광학적 특성을 보완하는 연구가 진행되고 있다. 본 연구는 알루미늄이 도핑 된 산화아연을 마이크로파 수열합성법으로 합성하였다. 전구체의 종류와 몰 비 등의 반응 변수를 조절하여 최적의 결정형상과 광학적 특성을 갖는 산화아연을 합성하였으며, 알루미늄을 도핑하여 광학적 특성 변화를 시도하였다. 합성된 입자는 SEM, XRD, PL, UV-Vis 분광기 및 EDS 등의 기기분석을 통해 광학적, 물리 화학적 특성을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.233-233
• /
• 2010

CdS thin films were deposited on glass substrates by R.F. magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process. Effects of thermal annealing on structural and optical properties were investigated at different temperatures ranging from 100 to $600^{\circ}C$. The crystallographic structure of the films and the size of the crystallites in the films were studied by X-ray diffraction. The crystallite sizes were found to increase, and the X-ray diffraction patterns were seen to sharpen by annealing. Optical properties of the films were calculated using the envelope method and the photoluminescence measurements. The optical properties of the films were seen to be dependent on the film thicknesses. The energy gap of the films was found to decrease by annealing. The band edge sharpness of the optical absorption was seen to oscillate by thermal annealing. Annealing over $400^{\circ}C$ was seen to degrade the optical properties of the film. The best annealing temperature for the films was found to be $400^{\circ}C$ from the optical properties. It is observed that the CdS film annealed at $400^{\circ}C$ reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at $400^{\circ}C$ is attributed to the improved crystalline quality of CdS thin film due to the effective relaxation of residual compressive stress and achieving maximum grain size. The results show that heat treatments under optimal annealing condition can provide significant improvements in the properties of CdS thin films.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.802-807
• /
• 1995

진공증착법으로 제작한 V$_2$O$_{5}$ 박막의 두께 및 결정성에 따른 전기변색 특성을 체계적으로 조사하였다. 증착된 박막은 노란색을 띄고 있었으며 14$0^{\circ}C$ 보다 높은 기판온도에서 증착된 V$_2$O$_{5}$ 박막은 결정질로 낮은 기판온도에서 증착된 박막들은 비정질로 밝혀졌다. 리튬 이온 주입에 따른 V$_2$O$_{5}$ 박막의 광 변조 특성 결과 V$_2$O$_{5}$ 박막의 두께와 결정성에 관계없이 300~500nm 파장영역에서는 산화발색이 500~1100nm 파장영역에서는 환원 발색이 나타났다. 비정질과 결정질 Li$_{x}$ V$_2$O$_{5}$ 박막의 optical band gap 에너지는 리튬 이온 주입양이 증가함에 따라 (x=0.0~0.6) 각각 0.75 [eV], 0.17 [eV]씩 높은 에너지쪽으로 이동하였다. 비정질 Li$_{x}$ V$_2$O$_{5}$ 박막의 coloration efficiency는 근적외선 영역에서는 리튬 이온 주입과 박막두께에 따라 거의 변화가 없었으나 blue와 near-UV 영역에서는 absorption edge가 500nm 파장근처에서 높은 에너지 부근으로 이동됨으로 인하여, 박막두께가 증가하고 리튬 이온주입양이 감소할수록 coloration efficiency가 상당히 증가하는 것으로 나타났다. 그러나 결정질 Li$_{x}$ V$_2$O$_{5}$ 박막의 경우 coloration efficiency는 전파장영역에서 리튬 이온 주입양과 박막두께에 거의 영향을 받지 않는 것으로 밝혀졌다.