• 한국산업정보학회논문지
• /
• 제17권6호
• /
• pp.19-24
• /
• 2012

본 논문에서는 상업용 아임센서터치 전자칠판(Interactive Whiteboard System, IWB)을 소개한다. 이 시스템은 손가락이나 펜을 이용하여 접촉식 상호작용이 가능한 화이트보드 스크린을 통해 개인용 컴퓨터를 운용할 수 있도록 도와주는 인터페이스(Interface)이다. 제안된 인터페이스는 윈도우즈 운영체제와 상호작용하며, 온도와 조명의 변화에 적응적으로 동작한다. 제안된 시스템은 카메라에서 입력된 수광부(Optical Receptive Field)의 영상을 참조영상과 비교하여 차이를 계산하고, 그 차이를 이용하여 터치스크린의 좌표값을 계산한다. 계산된 좌표값을 기반으로 윈도우즈 마우스 이벤트를 생성하여 윈도우즈시스템으로 전달한다. 우리는 참조영상을 갱신하기 위해 두 개의 스레드(Thread)을 이용한 임계영역을 구현하고, 차이계산의 신뢰성을 위해 적응적 임계값을 이용한 참조영상의 갱신을 구현한다. 제안된 터치스크린 인터페이스를 장착한 전자칠판 시스템은 향후 국내외 시장의 성장률이 높아 전도유망한 상품이며, 시장성이 밝을 것으로 기대한다.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.122-128
• /
• 2012

차량기지 검수고에 구조를 고려하였을 시, 철제빔으로 인해 열차를 검지하기 위한 궤도회로를 설치하기가 어렵고, 레일과 대지가 철제빔으로 연결되어 누설전류가 많아지므로 궤도회로 시스템을 적용할 수 없다. 그러므로 열차가 검수고에 들어오면 수작업으로 차량이 있다는 표시를 하여 사용하고 있으며, 잘못 취급할 시에는 열차충돌 혹은 탈선으로 이어지는 사고가 발생할 수 있다. 본 논문에서는 검수고에서 소프트웨어 프로그램을 이용하여 가상궤도회로를 적용하였다. 가상궤도회로의 알고리즘을 제시하였으며, 열차가 점유된 검수고 방향으로 신호를 취급하는 경우에 검수고 열차점유 표시 및 신호기 정지신호 표시로 인해 검수고에서 열차의 안전성을 확보하였다. 또한 프로그램의 신뢰도 및 가용도를 분석하여 소프트웨어에 적합한 결함허용 기법을 적용하였다.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1093-1098
• /
• 2007

Tilting trains are currently in operation in 13 countries around the world. With the advances in tilting technology, verification of economic efficiency, and changes in economic situations, the introduction of tilting trains will rapidly spread across the globe. The measurement system is composed of the industrial computers installed in the console and the measurement racks mounted on each car. It is utilized to accumulate the data by the communication card and the optical cable. The optical cable and power cable are coupled at the connector located in joint of train to make easy to disconnect car each other. The signal conditioner is designed to choose and to extend the channel for each sensor readily. The sensor measurement rack has adopted as decentralization method. It is installed in each car to minimize the cable length. In also, it is manufactured based on 19"rack and covered to protect the cable. In this study, the programs for measurement and analysis were also developed to understand the traction system characteristics of TTX. Using this measurement system, we studied that acceleration test, re-powering test, and gradually powering test. The acceleration performance of TTX is 1.735 km/h/s, and it is inner standard value. The notch test result from 1 to 7 steps, DC link voltage is under standard value, and the output electric current of inverter is controlled normally. From the test results, we saw the performances of the traction systems are normal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.295-296
• /
• 2006

We developed wire frame drive unit based on SMA for the 3D Shape display. Our basic concept is wire frame combination connected with a chain form which can create various shapes and it compared with pin array mechanism which is not able to display mushroom shape. It imitates antagonist mechanism of human musculoskeletal system. we create similar motion using repair-relaxation mechanism and locking mechanism by SMA. Therefore, in this paper, we propose SMA control solution for actuating repair-relaxation mechanism and locking mechanism. In our control system. we use optical sensor and quantitative angle between wire frames for closed loop control. And we supply amplified current for SMA by circuit composed of transistor and apply PWM signal to circuit for efficient control. So, wire frame drive unit enable diversity angle control based on sensor data. And then combination of wire frame drive units will create various objects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.366-369
• /
• 2002

At present, the study of direct digital X-ray detector and indirect digital X-ray detector proceed actively. But it needs high thickness and high voltage in selenium for high ionization rate. Therefore, we carried out the study of electric characteristics of a-Se with additive ratio of Iodine in drafting study for developing Hybrid X -ray Sensor for complementing direct digital X -ray detector and indirect digital X-ray detector in this paper. On this, there are formed Amorphous selenium multi-layers by sticking phosphor layer$(Gd_{2}O_{2}S(Eu^{2+}))$ using optical adhesives of EFIRON Co. Amorphous selenium multi-layers having dielectric layer(parylene) has characteristics of low dark-current, high X-ray sensitivity. So we can acquired a enhanced signal to noise ratio. We make Amorphous selenium multi-layers with $30{\mu}m$ thickness on glass.

• 대한전자공학회논문지
• /
• 제22권3호
• /
• pp.68-76
• /
• 1985

전하 결함 소자를 이용한 16×16 이차원 영상 감지 소자가 제작되었다. 제작된 소자는 2상(two-Phase)의 전극 구조로 제작 되었고 프레임 이동(frame transfer) 방식으로 동작한다. 표면 전위차를 얻기위해 이온 주입을 했고 NMOS공정을 따라 제작되었다. 영상을 얻기위한 시스템은 광학 렌즈 클럭 발생 및 구동 회로, 계단형 신호 발생기로 이루어지는데, EPROM을 사용하여 클럭 발생회로를 간단하게 하였다. 영상 시스템을 사용하여 오실로스코프 화면에 알파베트를 표시할 수 있었다. 소자의 특성으로 전하 이동 손실률과 암전류를 측정하였다.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.252-259
• /
• 2022

In this paper, a dual-function dynamically tunable metamaterial absorber is proposed. At frequency points of 1.545 THz and 3.21 THz, two resonance peaks with absorption amplitude of 93.8% (peak I) and 99.4% (peak II) can be achieved. By regulating the conductivity of photosensitive silicon with a pump laser, the resonance frequency of peak I switches to 1.525 THz, and that of peak II switches to 2.79 THz. By adjusting the incident polarization angle by rotating the device, absorption amplitude tuning is obtained. By introducing two degrees of regulation freedom, the absorption amplitude modulation and resonant frequency switching are simultaneously realized. More importantly, dynamic and continuous adjustment of the absorption amplitude is obtained at a fixed resonant frequency, and the modulation depth reaches 100% for both peaks. In addition, the sensing property of the proposed MMA was studied while it was used as a refractive index sensor. Compared with other results reported, our device not only has a dual-function tunable characteristic and the highest modulation depth, but also simultaneously possesses fine sensing performance.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.541-547
• /
• 2019

A novel photonic crystal fiber (PCF) sensor with three D-shaped holes based on surface plasmon resonance (SPR) is analyzed in this paper. Three D-shaped holes are filled with the analyte, and the gold film is deposited on the side of three planes. The design of D-shaped holes with outward expansion can effectively solve the uniformity problem of metallized nano-coating, it is beneficial to the filling of the analyte and is convenient for real-time measurement of the analyte. Compared with the hexagonal lattice structure, the triangular arrangement of the clad air holes can significantly reduce the transmission loss of light and improve the sensitivity of the sensor. The influences of the air hole diameter, the distance between D-shaped holes and core, and the counterclockwise rotation angle of D-shaped holes on sensing performance are studied. The simulation results show that the wavelength sensitivity of the designed sensor can be as high as 10100 nm/RIU and the resolution can reach 9.9 × 10^-6 RIU.

• 한국통신학회논문지
• /
• 제37권8B호
• /
• pp.706-711
• /
• 2012

기존의 LED (Light Emitting Diode)를 이용한 가시광 통신방식은 주로 수 m 의 짧은 전송거리와 수백 Mb/s 이하의 낮은 전송속도를 보여왔다. 이를 타개하기 위하여 본 논문에서는 MIMO (Multiple-Input Multiple-Output) 기술을 가시광 통신에 적용하고자 하는 연구를 수행하였다. 빛은 RF 주파수와는 물리적 특성이 다르기 때문에 기존의 RF 주파수에서 사용되던 MIMO 기술의 이론을 그대로 가시광 통신에 적용하기는 힘들다. 따라서, 본 논문에서는 렌즈를 이용하여 물리적으로 광신호를 분리하고, 이미지 센서를 수신기로 사용하여 MIMO 기술을 구현하는 방식을 채택하였다. 본 논문에서는 상용 이미지센서를 이용하여 채널당 200 bit/s의 전송속도 및 전송거리 10.5 m의 장거리 $2{\times}2$ MIMO LED 무선 가시광 통신 실험을 구현하였다.

• Current Optics and Photonics
• /
• 제8권4호
• /
• pp.355-365
• /
• 2024

Wavefront coding (WFC) imaging systems can redistribute the energy of an interference laser spot on an image plane sensor by wavefront phase modulation and reduce the peak intensity, realizing laser protection while maintaining imaging functionality by leveraging algorithmic post-processing. In this paper, a spiral axicon WFC imaging system is proposed, and the performance for laser protection is investigated by constructing a laser transmission model. An Airy disk on an image plane sensor is refactored into a symmetrical hollow ring by a spiral axicon phase mask, and the maximum intensity can be reduced to lower than 1% and single-pixel power to 1.2%. The spiral axicon phase mask exhibits strong robustness to the position of the interference laser source and can effectively reduce the risk of sensor damage for an almost arbitrary lase propagation distance. Moreover, we revealed that there is a sensor hazard distance for both conventional and WFC imaging systems where the maximum single-pixel power reaches a peak value under irradiation of a power-fixed laser source. Our findings can offer guidance for the anti-laser reinforcement design of photoelectric imaging systems, thereby enhancing the adaptability of imaging systems in a complex laser environment. The laser blinding-resistant imaging system has potential applications in security monitoring, autonomous driving, and intense-laser-pulse experiments.