• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.323-329
• /
• 2011

Certified reference materials (CRMs) have been used to calibrate surface profilers for reliable measurements. In this paper, we present a newly designed step height CRM which has a step height pattern with two different widths and various special patterns for checking radial magnification, distortion of optical viewing systems, etc. Especially, it could be useful for multi-probe inspection instruments in the manufacturing lines. The fabrication was done by conventional optical lithography and dry etching process with optimized conditions. To verify the step height values, a white-light scanning interferometer was used with objective lenses having magnification of $10{\times}$ and $100{\times}$. CRMs with nominal step heights of $0.5\;{\mu}m$, $1\;{\mu}m$, $3\;{\mu}m$, $5\;{\mu}m$, $7\;{\mu}m$, and $10\;{\mu}m$ were fabricated and the uniformity of these CRMs was evaluated to be less than 3 nm ($1{\sigma}$).

• Journal of the Optical Society of Korea
• /
• 제1권2호
• /
• pp.90-93
• /
• 1997

The shallow depth of focus in conventional light microscopy hinders the observation of the whole image when the object is thicker than the depth of field. Most of the existing techniques measured the object distance, which is not necessarily the actual distance of each pixel in the image. We implemented a means of determining the "best focus" of each pixel and located the height of object points by sectioning at different sample heights. Combining the height information and its gray values together, we obtained an image where the blur from the finite depth of focus is eliminated. Limitations of the technique are discussed together with composed images.ed images.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.55-58
• /
• 2019

최근 표면 플라즈몬 효과는 광 신호 향상에 중요하게 대두되고 있는 분야로써, 약한 광학적 신호를 증가시킴에 따라 바이오 분야나 뉴로사이언스에 매우 중요한 분야로 대두되었다. 플라즈모닉 구조를 제작하기 위해선 나노 구조의 크기 높이 그리고 입사광의 입사각 등 다양한 변수들이 존재하는데 본 논문에서는 플라즈모닉 나노구조의 제작을 위한 은 증착 높이에 따른 플라즈모닉 나노구조의 광학적 특성에 대한 연구를 진행하였다. 은 증착은 플라즈모닉 효과를 보기 위해 다양하게 사용하고 있는 금속으로 특정 파장에 반응을 보기 위해 제작한 구조 형태와 유사한 구조를 시간영역 유한차분(FDTD)법을 통해 광 특성을 예측하여, 최종적으로 제작한 구조의 은 나노 입자 부근에 에너지가 집중되는 결과를 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.959-961
• /
• 2003

Cirrus clouds observation was conducted using a lidar system in order to measure their height, thickness and optical depth at Kwangju (35$^{\circ}$10'N, 126$^{\circ}$53'), Korea in winter, December 2002, and spring March and April 2003. Cirrus clouds at high altitude can be distinguished from atmospheric aerosols location by high depolarization ratio and high altitude. Cirrus clouds were observed at 5${\sim}$12km altitudes with a high depolarization ratio from 0.2 to 0.5. Optical depth of cirrus clouds had varied from 0.28 to 1.81. Radiative effect of observed cirrus cloud on climate system was estimated to be negative net flux from ?0.24 to ?31.04 W/m$^{2}$.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.394-397
• /
• 2011

For the purpose of fabricating off-axis aspheric optics, we propose an 8-axis-polishing machine combined with a testing tower whose height is up to 9 m. The proposed polishing machine was designed and analyzed by using a well-known finite element method. The eight axes of the machine have a synchronized motion generated by a computer, and each axis was calibrated by a heterodyne laser interferometer or an optical encoder. After calibration, the maximum positioning error of the machine was less than 2 ${\mu}m$ within a whole 2 m ${\times}$ 2 m area. A typical fabrication result of a ${\phi}1.5$ m concave mirror was also described in this manuscript.

• BioChip Journal
• /
• 제12권4호
• /
• pp.280-286
• /
• 2018

Hydrogel scaffolds composed of multiple components are promising platform in tissue engineering as a transplantation materials or artificial organs. Here, we present a new fabrication method for implementing multi-layered macroscopic hydrogel scaffold composed of multiple components by controlling height of hydrogel layer through precise control of ultraviolet (UV) energy density. Through the repetition of the photolithography process with energy control, we can form several layers of hydrogel with different height. We characterized UV energy-dependent profiles with single-layered PEGDA posts photocrosslinked by the modular methodology and examined the optical effect on the fabrication of multi-layered, macroscopic hydrogel structure. Finally, we successfully demonstrated the potential applicability of our approach by fabricating various macroscopic hydrogel constructs composed of multiple hydrogel layers.

• 한국안광학회지
• /
• 제13권3호
• /
• pp.65-71
• /
• 2008

목적: 본 연구는 시중에서 유통되고 있는 완성품 돋보기와 안경원에서 조제가공된 돋보기의 광학적 중심점간의 문제점을 비교하여 눈에 미치는 영향을 연구하였다. 방법: 연구대상은 +1.00D에서 +4.00D까지 11개의 범주로 나누어 측정하였으며, 광주시 광산구에 사는 안질환이 없는 40세 이상의 남녀로 안경테 사이즈를 세 그룹으로 나누어 광학적 중심점과 광학적 높이를 측정하였다. 결과: 광학적 중심점은 57 mm에서 80 mm 범위 사이에 있었으며 대부분 61 mm에서 65 mm(64.6%) 사이였다. 광학적 중심높이 오차는 1 mm에서 8 mm 범주에 있었으며 4 mm가 공통범주(23%)에 속하였다. 완성품 돋보기는 불규칙한 사이즈를 가지고 있었다. 조사대상들은 거의 대부분 75.5%(151명)가 시중에 유통되는 완성품 돋보기를 사용하고 있었다. 대상자 151명을 조사한 결과, 완성품 돋보기의 광학적 중심점과 장용자의 P.D 사이에는 4 mm의 공통된 오차가 있었다. 더구나 광학적 중심 높이와 착용자의 O.H 사이에는 3 mm에서 4 mm의 오차가 있었다. 151명의 완성품 돋보기를 사용하는 사람들은 모두 피곤함을 느끼고 있었으며, 53명(35%)은 돋보기 착용 후 10분에서 20분 후부터 피곤함을 호소하였다. 이러한 조사를 바탕으로, 우리는 돋보기에 있어서 광학적 중심점 오차시 발생되는 프리즘 값을 발견할 수 있었으며 이는 완성품 돋보기가 착용하기에 충분하지 않다는 것을 나타낸다. 완성품 돋보기는 렌즈 굴절력과 상관관계가 있다는 것을 알 수 있었으며 또한 독일 RAL-915 규정을 따르지 않는다는 것도 알 수 있었다. 결론: 우리가 조사한 바를 기초로 할 때 완성품 돋보기는 우리의 시생활에 많은 위험적인 요소를 품고 있으며 안경사는 광학적 중심점을 토대로 정확하게 조제가공된 돋보기를 소비자에게 반드시 권하여야 할 것이다.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.15-24
• /
• 2021

In this paper, to analyze the types of surface morphology error according to factors that cause machining error, the experiments were conducted in the ultra-precision diamond machine using a diamond tool. The factors causing machining error were classified into the pressure variation of compressed air, external shock, tool errors, machining conditions (rotational speed and feed rate), tool wear, and vibration. The pressure variation of compressed air causes a form accuracy error with waviness. An external shock causes a ring-shaped surface defect. The installed diamond tool for machining often has height error, feed-direction position error, and radius size error. The types of form accuracy error according to the tool's errors were analyzed by CAD simulation. The surface roughness is dependent on the tool radius, rotational speed, and feed rate. It was confirmed that the surface roughness was significantly affected by tool wear and vibration, and the surface roughness of Rz 0.0105 ㎛ was achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.849-851
• /
• 1995

Magnetic heads on vcr drum are adjusted for protrusion, rotational angle, setting angle between two symmetrically positioned heads and height difference. Developed adjustment system covered assembly spec., namely ${\pm}2{\mu}m$ and ${\pm}30{\mu}m$ in rotational angle by using the image processing to determine head positions and S/W algorithm to compensate mechanical errors.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.94-101
• /
• 2014

Recently, in order to reduce the time required to replace an optical jumper cord, many researchers are using a field-installable connector and applying the ferrule polishing method, ferrule mechanical contact method, or ferrule fusion contact method. However, the process of arranging the length of the optical fiber, i.e., inserting the optical fiber into the ferrule by hand and checking its cross section, takes 60% of the time required for the entire process, which increases the overall cost. Therefore, in order to make this task more cost-effective, we will develop an automated inspection system with automatic cross-sectional arrangement of a field-installable connector. This system will be able to decrease the failure rate from 10% to 2% compared with the conventional method when cutting the optical fiber inserted into the ferrule. It will also improve the productivity by decreasing the test time by 28% compared with the conventional method. Our studies showed that it was possible to reduce the production costs and improve the quality of a field-installable connector, and we expect it to dominate the market.