Acknowledgement
Supported by : National Research Foundation of Korea (NRF)
References
- Chia, H.N. & Wu, B.M. Recent advances in 3D printing of biomaterials. J. Biol. Eng. 9, 4 (2015). https://doi.org/10.1186/s13036-015-0001-4
- Bajaj, P. et al. 3D biofabrication strategies for tissue engineering and regenerative medicine. Annu. Rev. Biomed. Eng. 16, 247-276 (2014). https://doi.org/10.1146/annurev-bioeng-071813-105155
- Mota, C., Puppi, D., Chiellini, F. & Chiellini, E. Additive manufacturing techniques for the production of tissue engineering constructs. J. Tissue Eng. Regen. Med. 9, 174-190 (2015). https://doi.org/10.1002/term.1635
- Patra, S. & Young, V. A review of 3D printing techniques and the future in biofabrication of bioprinted tissue. Cell Biochem. Biophys. 74, 93-98 (2016). https://doi.org/10.1007/s12013-016-0730-0
- Choi, K. et al. 3D shape evolution of microparticles and 3D enabled applications using non-uniform UV flow lithography (NUFL). Soft Matter 13, 7255-7263 (2017). https://doi.org/10.1039/C7SM00987A
- Skoog, S.A., Goering, P.L. & Narayan, R.J. Stereolithography in tissue engineering. J. Mater. Sci.: Mater. Med. 25, 845-856 (2014). https://doi.org/10.1007/s10856-013-5107-y
- Song, S.-H. et al. Fine-tuned grayscale optofluidic maskless lithography for three-dimensional freeform shape microstructure fabrication. Opt. Lett. 39, 5162-5165 (2014). https://doi.org/10.1364/OL.39.005162
- Hribar, K.C. et al. Light-assisted direct-write of 3D functional biomaterials. Lab Chip 14, 268-275 (2014). https://doi.org/10.1039/C3LC50634G
- Xing, J.-F., Zheng, M.-L. & Duan, X.-M. Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery. Chem. Soc. Rev. 44, 5031-5039 (2015). https://doi.org/10.1039/C5CS00278H
- Melchels, F.P. et al. Additive manufacturing of tissues and organs. Prog. Polym. Sci. 37, 1079-1104 (2012). https://doi.org/10.1016/j.progpolymsci.2011.11.007
- Je, K. et al. Lithographically Designed Conical Microcarriers for Programed Release of Multiple Actives. Adv. Mater. Interfaces 5, 1701163 (2018). https://doi.org/10.1002/admi.201701163
- Kim, J.H., Je, K., Shim, T.S. & Kim, S.H. Reaction-Diffusion-Mediated Photolithography for Designing Pseudo-3D Microstructures. Small 13, 1603516 (2017). https://doi.org/10.1002/smll.201603516
- Shim, T.S., Yang, S.-M. & Kim, S.-H. Dynamic designing of microstructures by chemical gradient-mediated growth. Nat. Commun. 6, 7584 (2015). https://doi.org/10.1038/ncomms8584
- Dendukuri, D. et al. Modeling of oxygen-inhibited free radical photopolymerization in a PDMS microfluidic device. Macromolecules 41, 8547-8556 (2008). https://doi.org/10.1021/ma801219w
- Vitale, A., Hennessy, M.G., Matar, O.K. & Cabral, J.T. A unified approach for patterning via frontal photopolymerization. Adv. Mater. 27, 6118-6124 (2015). https://doi.org/10.1002/adma.201502607
- Choi, N.W. et al. Multiplexed detection of mRNA using porosity-tuned hydrogel microparticles. Anal. Chem. 84, 9370-9378 (2012). https://doi.org/10.1021/ac302128u
Cited by
- MALDI-TOF Mass Spectrometry Based on Parylene-Matrix Chip for the Analysis of Lysophosphatidylcholine in Sepsis Patient Sera vol.91, pp.22, 2018, https://doi.org/10.1021/acs.analchem.9b04019
- A Matrix Metalloproteinase Sensing Biosensor for the Evaluation of Chronic Wounds vol.13, pp.4, 2018, https://doi.org/10.1007/s13206-019-3403-4
- Locally Controlled Diffusive Release of Bone Morphogenetic Protein-2 Using Micropatterned Gelatin Methacrylate Hydrogel Carriers vol.14, pp.4, 2018, https://doi.org/10.1007/s13206-020-4411-0