• 한국광학회지
• /
• 제12권4호
• /
• pp.294-299
• /
• 2001

최근에 구조물의 안전 감시를 위하여 광섬유 센서를 개발하기 위한 연구가 활발하게 진행되고 있다. 따라서 본 연구에서는 구조물의 넓은 면적에 분포되어있는 변형률을 한 개의 광섬유 라인으로 측정하기 위한 광섬유 BOTDA(Brillouin Optical Time Domain Analysis) 센서를 개발하는 연구를 수행하였다. 광섬유 BOTDA 센서는 2개의 광전 변조기 (electro-optic modulator)를 사용하여 간단하게 구성하였다. 광섬유의 변형률 측정실험을 통하여 광섬유의 전체길이 4.8km중에 변형률이 가해진 10m 구간의 변형률을 200회 평균화 처리된 신호로부터 브릴루앙 주파수 천이를 측정함에 의하여 정확하게 측정할 수 있음을 보였다. 또한 삼성전자의 단일모드 광섬유의 경우 변형률 측정 실험을 통하여 변형률 감지도가 4.81 MHz/0.01%임을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.826-830
• /
• 2015

Transparent Ag nanowire conducting thin films with high surface hardness were fabricated by bar coating method. When coating speed was changed from 35 mm/sec to 50 mm/sec, the transmittance of coated glass increased from 65.3% to 80.8% in visible light range and the surface resistance was changed from $10.1{\Omega}/sq$ to $23.3{\Omega}/sq$. The surface hardness and adhesion of thin film were 5H and 5B.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.821-825
• /
• 2015

Anti-reflective (AR) thin film was fabricated on a glass substrate by sol-gel method. The coating solution was synthesized with TEOS (tetraethlyorthosilicate) and poly ethylene glycol (PEG, 4.0 wt%). As the withdrawal speed of coating was changed from 0.1 mm/sec to 0.3 mm/sec, the thickness and refractive index of prepared thin films were changed. The reflectance and transmittance of coating glass fabricated by the withdrawal speed of 0.1 mm/sec were 0.62% and 95.0% in visible light range. The refractive index and thickness of single layer thin film were n= 1.29 and ca. 99.0 nm.

• 정보통신설비학회논문지
• /
• 제10권3호
• /
• pp.110-114
• /
• 2011

The recent development of 4G mobile communication system has led to the rapid technology shift from conventional repeater systems using coaxial cable links towards new fiber optic repeater systems using fiber-optic links between the base station and the outdoor fiber optic repeater. The technical changes have brought up the increasing needs of robust optic links that can be used in harsh environments. Based on the most demanding requirements, a new outdoor optical connector employing 2-channel fiber optics, uplink and downlink, has been developed for the applications where the rugged environmental protection is essential. This paper describes the development of the new connector along with the design criteria and performance results. In summarizing, the prototype optical connectors have undergone extensive laboratory and field test, and they have shown exceptional optical and mechanical characteristics under extreme environmental conditions. The connectors have also exhibited capabilities of providing fast and easy installation while maintaining high performance fiber optic connections.

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.40-43
• /
• 2016

Transparent color coating films were fabricated on a glass substrate by using sol-gel hybrid binder and organic dye. Sol-gel hybrid binder coating film fabricated with PTMS of 0.03 mole showed a very high pencil hardness of 9 H. As the withdrawal speed increased from 1.0 mm/s to 5.0 mm/sec, The yellowness ($b^*$) of coating glass also gradually increased. The transmittance of yellow color coating glass was 82.6% and the haze of coating glass was 0.35%. Red and blue color coating glasses also showed the high transmittance of 62.4% and 80.6% respectively. The surface hardness of color coating films was 6 H.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.556-562
• /
• 2007

This paper presents the use of a novel fiber optic accelerometer system to monitor ambient vibration (both wind-induced one and vehicle-induced) of a real bridge structure. This sensor system integrates the $Moir\'{e}$ fringe phenomenon with fiber optics to achieve accurate and reliable measurements. A low-cost signal processing unit implements unique algorithms to further enhance the resolution and increase the dynamic bandwidth of the sensors. The fiber optic accelerometer has two major benefits in using this fiber optic accelerometer system for monitoring civil engineering structures. One is its immunity to electromagnetic (EM) interference making it suitable for difficult applications in such environments involving strong EM fields, electrical spark-induced explosion risks, and cabling problems, prohibiting the use of conventional electromagnetic accelerometers. The other is its ability to measure both low- and high-amplitude vibrations with a constantly high resolution without pre-setting a gain level, as usually required in a conventional accelerometer. The second benefit makes the sensor system particularly useful for real-time measurement of both ambient vibration (that is often used for structural health monitoring) and strong motion such as earthquake. Especially, the semi-strong motion and the small ambient one are successfully simulated and measured by using the new fiber optic accelerometer in the experiment of the structural health monitoring of a real bridge.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권3호
• /
• pp.237-243
• /
• 1999

Recently, there has been considerable interest in the development of fiber-optic sensors based on fiber Bragg gratings (FBGs), which can be made into Ge-doped fiber's core by UV phase mask or holographic methods. A good sensitivity and small size of this sensor make it an ideal candidate for distributed sensing in smart structures or other structural monitoring applications. In this study, fiber optic Bragg grating sensor, which could be applied to measure the absolute strains, was constructed and the strain sensitivity of this sensor was investigated in order to apply to the structural health monitoring. Fiber Fabry-Perot (FFP) filter has been used to detect the optical signals instead of optical spectrum analyzer. It has been convenient to determine the structural strains from the output signal of FBGs. The fiber optic Bragg grating sensor was attached on the aluminum beam near the electrical strain gage to measure the same strain. The relationship between strain and fiber signal was linearly fitted. The strain sensitivity of the fiber optic Bragg grating sensor was determined as $l.57{\mu}{\varepsilon}/{\mu}sec$ from the aluminum beam test.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.714-718
• /
• 2018

Anti-reflection thin films are fabricated on glass substrates using the screen printing method. Tetra ethyl silicate(TEOS) and methyl tri methoxy silane(MTMS) are used as starting materials and buthyl carbitol acetate(BCA) and buthyl cellusolve(BC) are mixed to improve the viscosity of the solution. Anti-reflection thin films are fabricated according to the number of the screen mesh and the characteristics improve as the mesh size increases. The transmittance and reflectance of the coated thin film using 325 mesh are about 94 % and 0.43 % in the visible wavelength. The thickness and refractive index of the AR thin film are 107 nm and n = 1.26, respectively.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.499-507
• /
• 2004

광섬유 ROTDR (Rayleigh optical time domain reflectometry) 센서와 보디 긴 광섬유를 감지광섬유로 사용할 수 있는 광섬유 BOTDA (Brillouin optical time domain analysis) 센서를 구성하고, 이들 각각을 이용하여 중요보안 대상체인 사회기반시설물에 침투하는 침입자를 탐지할 수 있는 기포 연구를 수행하였다 ROTDR 센서의 감지부로는 넓은 면적을 감지할 수 있는 매설형 광섬유 센서 탐지판을 제작하고, 인가된 침입물체의 위치와 무게에 따른 신호특성을 고찰하였다. ROTDR 센서는 펄스 폭이 30ns이고, 광섬유의 길이는 10km 이상이다. 위치탐지오차는 약 2m 이내였으며, 무게에 따른 탐지능력은 20kgf, 40kgf, 60kgf, 80 kgf의 네 단계를 구분할 수 있음을 알 수 있었다. 넓은 지역에 걸친 침입자의 침투를 감시하기 위하며 수십 km의 광섬유 길이 전제를 감지부로 사용할 수 있는 광섬유 BOTDA 센서를 개발하였다. BOTDA 센서는 한 개의 레이저 다이오드와 두 개의 광전 변조기(electro-optic modulator)를 사용하여 간단하게 구성하였다. 침입자에 의한 광섬유의 변형률 벽화를 탐지하는 실험을 수행하기 위하여 광학테이블 위에 광섬유에 변형률을 인가하기 위한 실험 장치를 설치하여 실험을 수행하였다. 이 실험으로부터 시간간격 1.5 초동안 광섬유 약 4.81km의 길이를 거리분해능 3m로 침입자를 탐지할 수 있음을 확인하였다.

• 한국광학회지
• /
• 제17권5호
• /
• pp.469-474
• /
• 2006

본 논문에서는 실리카 기반의 다중모드 간섭기를 이용하여 적은 초과손실을 갖는 $1{\times}16$ 마하젠더 스위치에 대한 설계 및 측정결과에 대하여 논하였다. 제작된 $1{\times}16$ 마하젠더 스위치는 마하젠더 간섭계(Mach-Zehnder Interferometer, MZI) 구조를 갖는 $2{\times}2$ 열광학스위치를 단위소자로 하였으며, 15개의 단위소자를 이용하여 4단(stage)으로 구성하였다. 먼저 광분배기와 $2{\times}2$ MZI 열광학 스위치등의 개별적인 특성을 파악하였고, 그 결과를 전체 소자의 설계에 적용함으로써 보다 좋은 성능을 얻을 수 있었다. 제작된 다중모드 간섭기를 이용한 MZI 구조의 단위스위치 당 초과손실은 최소 -0.5dB로 측정되었다.