• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.20-28
• /
• 2022

Objective: Although, digital models have recently been used in orthodontic clinics, physical models are still needed for a multitude of reasons. The purpose of this study was to assess whether the printed models can replace the plaster models by evaluating their accuracy in reproducing intermaxillary relationships and by appraising the clinicians' ability to measure the printed models. Methods: Twenty sets of patients' plaster models with well-established occlusal relationships were selected. Models were scanned using an intraoral scanner (Trios 3, 3Shape Dental System) by a single operator. Printed models were made with ZMD-1000B light-curing resin using the stereolithography method 3-dimensional printer. Validity, reliability, and reproducibility were evaluated using measurements obtained by three operators. Results: In evaluation of validity, all items showed no significant differences between measurements taken from plaster and printed models. In evaluation for reliability, significant differences were found in the distance between the gingival zeniths of #23-#33 (DZL_3) for the plaster models and at #17-#43 (DZCM_1) for the printed models. In evaluation for reproducibility, the plaster models showed significant differences between operators at midline, and printed models showed significant differences at 7 measurements including #17-#47 (DZR_7). Conclusions: The validity and reliability of intermaxillary relationships as determined by the printed model were clinically acceptable, but the evaluation of reproducibility revealed significant inter-operator differences. To use printed models as substitutes for plaster models, additional studies on their accuracies in measuring intermaxillary relationship are required.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.49-59
• /
• 2016

Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship's operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively. Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.

• 에너지공학
• /
• 제24권1호
• /
• pp.17-23
• /
• 2015

전기식 출입문 시스템은 철도차량 영업운전에 영향을 주는 가장 중요한 시스템 중의 하나이다. 도시철도차량의 출입문은 승객들의 승하차를 담당하는 장치로써 고장이 발생할 경우 승객의 안전과 직접적인 영향을 미치기 때문에 열차운행에 영향을 미치는 중요한 장치이다. 최근에는 전기식 출입문 시스템의 신뢰도 목표값을 철도운영자가 철도차량 설계와 제작을 위한 발주사양 기술 요구조건에 포함하는 경향이 있으며, 차량 제작자는 제작시 발주사양기술 요구조건에서 철도운영자가 제시한 전기식 출입문 시스템의 신뢰도 목표값을 만족시켜야 하고, 철도운영자는 유지보수 데이터를 기반으로 공급자의 신뢰도 목표값 달성여부를 확인하고 승인하여야 한다. 본 연구에서는 전기식 출입문 시스템의 유지보수 현장 데이터를 수집하여 신뢰도를 미니탭 통계프로그램으로 분석하였다. 현장 데이터를 적용한 신뢰도 분석은 철도차량에 대한 새로운 유지보수 정책이나 유지보수 주기를 바꾸는데 매우 유용할 것이다.

• 한국측량학회지
• /
• 제4권2호
• /
• pp.43-58
• /
• 1986

지도제작에서 지도의 정확도와 신빙성 (reliability)을 지배하는 주요한 요인은 지형도의 원도(mapase)의 측도과정인 도화작업(stereo-restitution)이라고 할 수 있다. 항공사진의 도화작업의 대부분은 아직까지 아나로그(analogue) 방법에 의하여 수행되고 다. 그러므로 도화작업은 실체도화기(stereo plotter)에 의하여 수행 되므로 도화기를 조종하는 도화사(operator)의 숙연도, 기능의 수준 및 개인습성에 의한 관측오차에 따라서 도화성과의 질에 상당한 영향을 끼치고 있음이 명백하다. 본 연구에서는 도화사의 경역별 개인오차를 도화기종별로 검출하여 분석하였고 또한 도화대상이 지형, 지물의 난역도와 세부상세도에 따르는 결과도 분석하였으며 우리나라에서 답습하고 있는 선도화 후 현지확인의 작업과정이 원도측도의 정확도에 미치는 영향도 고찰하여 보았다.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.56-61
• /
• 2009

In this paper, A telemetering control system for the HDTV SMPS Aging System is developed. Manual Aging System is usually used to measurement of a produced SMPS. But in this system, the respective operator is arranged and monitoring the test cycle visually- According to an excess of the test time and mistakes of an operator, the reliability makes come to be low. Therefore as using the telemetering control system, it improves a productivity and a reliability of the HDTV SMPS. In the developed system, elec1rical signal is measured from aging system, and converted into the digital signal. Also the telemetering control system is composed of many units - telemetering control units for collecting the data, data relay units for the digital transmission service, data division for the multichannel realization.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.447-449
• /
• 2003

In competitive electricity markets, maintenance schedule is submitted by Genco's and Transco's, and coordinated by ISO with the adequacy criterion. This paper presents an alternative coordination procedure by ISO on the maintenance schedule.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.240-245
• /
• 2001

Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, other materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to various factors. In this study, the probability of detection, used logistic probability model and Monte Carlo simulation, estimated the reliability of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test applied these models.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.8-15
• /
• 2012

GO-FLOW기법은 시스템이 정상적으로 작동할 가능성을 평가할 수 있는 기법으로써 신호선과 연산자를 사용하여 시스템을 GO-FLOW Chart로 모델화하고, 이 GO-FLOW Chart를 순차적으로 해석하여 시스템의 신뢰도를 평가하는 기법이다. 그러나 GO-FLOW기법은 1개의 시스템 구성요소를 여러 개의 연산자로 모델링하므로 시스템 흐름도와 상이한 GO-FLOW Chart가 작성될 수 있고, 시간점을 지정하여 시간을 모델링하므로 실제 운전시간에 따른 신뢰도 변화를 평가하기 어렵다. 따라서 본 연구에서는 구성요소의 기능(정상/고장)을 기준으로 시스템의 신뢰도를 평가하는 기법을 개발하였다. 본 기법은 구성요소의 운전상태와 상관없이 그 기능을 유지할 가능성을 기준으로 시스템의 신뢰도를 평가하며, 1개의 구성요소는 1개의 연산자로 모델링하므로 시스템 흐름도와 거의 유사한 모델도를 작성할 수 있고, 실제시간을 반영한 연산자를 사용하여 실제시간에 따른 시스템의 신뢰도를 쉽게 평가할 수 있다.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.123-128
• /
• 2007

In order to apply a static fault-tree (FT) method to a system or a plant whose configuration changes dynamically, condition gates and a post processing method are used to effectively accommodate these changes. An operator's performance change, which can be caused by these configuration changes, should also be considered to assess the risk to a plant in a more realistic manner. This study aims to develop an integrated framework to accommodate various configuration changes and their effect on an operator’s performance by using the FT model. We applied a condition-based human reliability assessment (CBHRA) method to consider various conditions endured by an operator. That is, we integrated the CBHRA method with the conventional post processing method for modeling the system configuration changes. The effect of the condition monitoring systems installed in a plant is also considered. In this study, we show an example application of the integrated framework to a probabilistic safety assessment for the shutdown phase of a nuclear power plant.