• 항공우주기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2014

고흥항공센터는 전남 고흥 간척지에 위치하며 길이 700m, 폭 25m의 활주로를 통해 국내에서 개발된 무인기의 비행시험장으로 활용되고 있으며 비행체 조립 및 점검을 위한 시험동을 갖추고 있다. 항공센터에서 이루어지는 개발 항공기들의 항공안전을 위하여 비행시험 지원설비를 구축하고 있으며 현재 지상감시시설로서 1090ES ADS-B를 구축하였다. ADS-B는 차세대 항행감시 장비로서 위성항법과 데이터 통신을 기반으로 항행정보를 실시간으로 공유할 수 있으며 구축된 ADS-B 지상국과 ADS-B 송신기간 지상 및 비행시험을 통하여 ADS-B 지상국의 정상적인 운용과 비행시험 활용 가능성을 확인하였다.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.125-132
• /
• 2018

한국형발사체 발사대시스템의 지상기계설비는 수평상태로 총 조립된 발사체를 조립동에서 발사패드로 이송하여 기립 후 안착시키고, 발사체로의 추진제 공급을 위한 공급 및 분리장치를 제공하며 발사체 이륙까지의 기구학적인 동작과 기계적인 운용을 담당하는 설비이다. 본 논문에서는 한국형발사체의 요구조건을 충족시키기 위하여 개발 중인 지상기계설비들의 구성과 기능, 형상 설계 결과를 소개하고, 발사운용절차에 따른 각 장치들의 운용개념을 소개한다.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.18-25
• /
• 2017

The use of unmanned combat systems is of interest for future battlefield. Advanced techniques are being actively studied to build fully autonomous unmanned systems. However, there are technical, ethical and legal limitations for the fully autonomous unmanned combat systems. In addition, a remote controlled system is necessary so far in order to prepare for situations where fully autonomous unmanned systems fail to function properly. Thus, a procedure of developing operational requirements in system level is proposed and interface requirements of unmanned combat vehicles for remote control are described in this study.

• 시스템엔지니어링학술지
• /
• 제10권2호
• /
• pp.15-20
• /
• 2014

The river crossing is a very challenging operational function for the ground wheeled vehicle. In this study, the typical hazardous elements were identified by analysing the functional flow of river crossing operation and the survey on the similar operational experiences in real fields. The identified hazardous elements were reviewed on the basis of ALARP concept and reduction approaches were recommended for limited cases.

• 한국컴퓨터산업학회논문지
• /
• 제2권6호
• /
• pp.747-758
• /
• 2001

군 정보체계를 개발함에 있어 선진국에서도 문제 시 되고 있는 체계간의 상호 운용성은 반드시 보장되어야한다. 따라서 미군이 연구한 C4I Architecture Framework 이론과 BPR 기법을 바탕으로 하여 연구한 전술 C4I체계의 체계 종합 구조 중 운용구조를 작성한 과정과 결과를 제시하여 관련 이론 발전에 기여하고자 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.602-606
• /
• 2011

In this study, operational vibration experiment and analysis have been conducted for the 4-blade small vertical-axis wind turbine (VAWT) including the effect of tower elastic behavior. Computational structural dynamics analysis method is applied to obtain Campbell diagram for the VAWT with elastic tower. An open type wind-tunnel is used to change and keep the wind velocity during the ground test. Equivalent reduced elastic tower is supported to the VAWT so that the elastic stiffness effect of the tower can be reflected to the present vibration experiment. Various excitation sources with aerodynamic forces are considered and the dominant operating vibration phenomena are physically investigated in detail.

• Advances in nano research
• /
• 제11권6호
• /
• pp.641-648
• /
• 2021

In this article, the dynamic parameters (frequencies, mode shapes, damping ratios) of the scaled concrete structure and the dynamic parameters (frequencies, mode shapes, damping ratios) of the entire outer surface of titanium dioxide, 80 micron in thickness are compared using operational modal analysis method. Ambient excitation was provided from micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition (EFDD) was used for the output only modal identification. From this study, a good correlation between mode shapes was found. Titanium dioxide applied to the entire outer surface of the scaled concrete structure has an average of 11.78% difference in frequency values and 10.15% in damping ratios, proving that nanomaterials can be used to increase rigidity in structures, in other words, for reinforcement. Another important result determined in the study was the observation of the adherence of titanium dioxide and similar nanomaterials mentioned in the introduction to concrete structure surfaces was at the highest level.

• Advances in nano research
• /
• 제12권1호
• /
• pp.65-72
• /
• 2022

The dynamic properties (frequencies, mode shapes, damping ratios) of the scaled WPC warehouse are compared using the operational modal analysis approach to the dynamic parameters (frequencies, mode shapes, damping ratios) of the full outer surface of titanium dioxide, 70 micron in thickness. Micro tremor ambient vibration data on ground level was used to provide ambient excitation. For the output-only modal identification, Enhanced Frequency Domain Decomposition (EFDD) was used. This study discovered a strong correlation between mode shapes. Titanium dioxide applied to the entire outer surface of the scaled WPC warehouse results in an average 14.05 percent difference in frequency values and 7.61 percent difference in damping ratios, demonstrating that nanomaterials can be used to increase rigidity in structures, or for reinforcement. Another significant finding in the study was the highest level of adherence of titanium dioxide and similar nanomaterials mentioned in the introduction to WPC structure surfaces.

• 한국항공운항학회지
• /
• 제30권4호
• /
• pp.1-8
• /
• 2022

In this study, we propose trajectory-based arrival management using CDO (Continuos Descent Operations). The operational procedures with TBO (Trajectory-Based Operations) concept were established to allow aircraft and ground system to share the trajectories with each other in real time. The proposed operational concept was validated in the air traffic control simulation environment, which consists of controller working position, pseudo pilot system, air traffic generation system, and controllers' decision support system for arrival management using CDO. Simulation results compared with actual flight data indicate that proposed concept could improve the efficiency of traffic flow management in terms of total descending time and fuel consumption. And it was confirmed that if there is a system that can share and utilize the synchronized trajectory, it can be helpful to control arrival aircraft and apply CDO concept.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.59-67
• /
• 2012

In this study,the compact type solar thermal and ground coupled heat pump hybrid system for space heating/cooling and hot water supply has been developed. This hybrid system was installed in Zero Energy Solar House(ZeSH) in KIER for the demonstration. The thermal performance and operational characteristics of this hybrid system were analysed especially. The results are as follows. (1) This hybrid system was designed in order to address the existing disadvantages of solar thermal/ground coupled heat pump system. For this design, all parts except solar collector and ground coupled heat pump were integrated into a single product in a factory. The compact type unit includes two buffer tanks, an expansion tank, pumps, valves, a controller, etc. This system has an advantage of easy installation with simple plumbing work even in narrow space. (2) The thermal charging and discharging time of the buffer tanks and its characteristics by ground coupled heat pump, and heat pump COP according to geo-source temperature and buffer storage temperature have been studied. This system was found to meet well to the heat load without any other auxiliary heating equipment. (3) The operating hours of the ground coupled heat pump as a backup device of solar thermal can be reduced significantly by using solar heat. It was also found that the minimum heating water supply setting temperature and maximum cooling water supply setting temperature make an influence on the heat pump COP. The lower heating water and the higher cooling water temperature, the higher COP. In this respect, the hybrid system's performance can be improved in ZeSH than conventional house.