• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.101-108
• /
• 2004

The objectives of this study were to determine the natural frequency of a walking-type cultivator's handle using a modal analysis, to determine whether or not the handle resonates with forcing frequency induced by its engine, and to determine a method to reduce the handle vibration using a technique of the operational deflection shapes(ODS). Results of the study are as follows: The natural frequencies of the handle up to third harmonics were found to be 20.4, 22.5 and 92.1 Hz in the vertical direction and 14.9, 93, and 132 Hz in the horizontal direction. It was found that the handle does not resonate with the forcing frequency of the engine, which is 52 Hz. The operational deflection shape analysis revealed the deflected shapes of the handle in the vertical and horizontal directions and suggested that the handle vibration can be reduced by adding some mass to the place where the largest deflection occurs. Attaching of 1.1 kg mass adjacent to the largely deflected area resulted in reductions of vibration from 9.45 to 8.03 m/s$^2$ in x-axis direction from 3.89 to 3.16 m/s$^2$ in y-axis direction and from 7.89 to 3.09 m/s$^2$ in z-axis direction, which are respectively 15, 19 and 61% reductions. The total vibration level was reduced by 29%, indicating that mass-adding method by the ODS is very effective for reducing the handle vibrations of the cultivators.

• Steel and Composite Structures
• /
• 제16권1호
• /
• pp.21-44
• /
• 2014

The aim of this study is to determine the dynamic characteristics of long reinforced concrete highway bridges with post-tension tendons using analytical and experimental methods. It is known that the deck length and height of bridges are affected the dynamic characteristics considerably. For this purpose, Berta Bridge constructed in deep valley, in Artvin, Turkey, is selected as an application. The Bridge has two piers with height of 109.245 m and 85.193 m, and the total length of deck is 340.0 m. Analytical and experimental studies are carried out on Berta Bridge which was built in accordance with the balanced cantilever method. Finite Element Method (FEM) and Operational Modal Analysis (OMA) which considers ambient vibration data were used in analytical and experimental studies, respectively. Finite element model of the bridge is created by using SAP2000 program to obtain analytical dynamic characteristics such as the natural frequencies and mode shapes. The ambient vibration tests are performed using Operational Modal Analysis under wind and human loads. Enhanced Frequency Domain Decomposition (EFDD) and Stochastic Subspace Identification (SSI) methods are used to obtain experimental dynamic characteristics like natural frequencies, mode shapes and damping ratios. At the end of the study, analytical and experimental dynamic characteristic are compared with each other and the finite element model of the bridge was updated considering the material properties and boundary conditions. It is emphasized that Operational Modal Analysis method based on the ambient vibrations can be used safely to determine the dynamic characteristics, to update the finite element models, and to monitor the structural health of long reinforced concrete highway bridges constructed with the balanced cantilever method.

• 한국IT서비스학회지
• /
• 제18권4호
• /
• pp.67-82
• /
• 2019

The purpose of this study is to improve the calculation method of the software operation pricing proposed by the software business price calculation guide from 'input manpower method' to 'rate calculation method'. The software operation pricing of the input manpower method is not objectively calculated in the domestic IT outsourcing situation where the statistical data based on the activity based estimating is insufficient and it is decided by agreement between the owner and the client. In addition, there was no standard for adjusting the productivity according to the characteristics of the operation service. In order to improve this, an operational correction factor item that can affect the software operation productivity was selected based on foreign and domestic standards, and it was confirmed through the first questionnaire to IT operation managers. In order to determine the level of difficulty of the fixed operational correction factors, the operational correction factor using AHP technique was confirmed through a second questionnaire for pairwise comparison. The operational difficulty calculation table was developed with reference to COCOMO and ITIL standards. Finally, we propose a new pricing scheme that reflects the operating rate. Regression analysis was carried out by collecting the data of the domestic public institutions on the estimated cost and the actual cost calculated from the new rate method software operation pricing. The results of the regression analysis show that the estimated cost and the actual cost are related to each other. Mean magnitude of relative error(MMRE) and PRED[25] analysis were added for accuracy analysis. MMRE and PRED also showed satisfactory results, confirming the possibility of replacing the rate method software operation pricing.

• 한국시뮬레이션학회논문지
• /
• 제19권2호
• /
• pp.63-72
• /
• 2010

미래전장에서 대화력전(Counter Fire)의 중요성은 더욱 부각되고 있다. 대화력전은 적 화력자산과 이를 지휘통제하는 모든 요소를 타격하여 적의 화력자산의 능력과 전투지속능력 및 전의를 약화시키는 화력전투를 말한다. 대화력전은 크게 공세적 (Proactive) 대화력전과 대응적(Reactive) 대화력전으로 구분된다. 지금까지의 연구들을 보면 공세적 대화력전의 탐지수단인 UAV(Unmanned Aerial Vehicle:무인항공기)에 대한 운용효과 연구는 지속적으로 발전되고 있지만, 대응적 대화력전 탐지수단인 포병 표적탐지 레이더에 대한 운용효과를 계량적으로 분석한 결과는 없는 실정이다. 이에 본 연구에서는 운용중인 포병 표적탐지 레이더의 운용효과를 C2(Command & Control : 지휘통제)이론과 행위자 기반 시뮬레이션인 MANA(Map Aware Non-uniform Automata)모델을 이용하여 계량적으로 분석 제시함으로써 표적탐지레이더 운용 효과를 구체적으로 보여주었다.

• 대기
• /
• 제32권1호
• /
• pp.71-84
• /
• 2022

This paper describes verification results for the ocean analysis field produced by the Nucleus for European Modelling of the Ocean (NEMO) of the Korea Meteorological Administration (KMA) against observed Argo floats and drift buoys over the western Pacific Ocean and the equatorial Pacific during 2020~2021. This is confirmed by a comparison of the verification for the newly updated version of the HYbrid Coordinate Ocean Model/Navy Coupled Ocean Data Assimilation (HYCOM/NCODA) against same observations. NEMO shows that the vertical ocean temperature is much closer to the Argo floats than HYCOM for most seasons in terms of bias and root mean square error. On the other hand, there are overall considerable cold biases for HYCOM, which may be due to the more rapid decreasing temperature at the shallow thermocline in HYCOM. Conclusion demonstrated that the NEMO analysis for ocean temperature is more reliable than the analysis produced by the latest version of HYCOM as well as by the out-of-date HYCOM applied to the precedent study. The surface ocean current produced by NEMO also shows 14% closer to the AOML (Atlantic Oceanographic and Meteorological Laboratory) in situ drift buoys observations than HYCOM over the western Pacific Ocean. Over the equatorial Pacific, however, HYCOM shows slightly closer to AOML observation than NEMO in some seasons. Overall, this study suggests that the resulting information may be used to promote more use of NEMO analysis.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.405-410
• /
• 2017

This paper deals with 3D simulation of industrial robot for automated manufacturing system. In order to evaluate the operational characteristics of the industrial robot system in the worst case motion scenario, flexible - rigid multibody analysis was performed. Then, the rigid body dynamics analysis was performed and the results were compared with the flexible - rigid multibody analysis. Modal analysis was also performed to confirm the dynamic characteristics of the robot system. In the case of the flexible-rigid multibody simulation, only the structural members of interest were modeled as elastic bodies to confirm the stress state. The remaining structural members were modeled as rigid bodies to reduce computer resources.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.660-666
• /
• 2012

The weapon system is getting more and more expensive, complex and smarter. Therefore, efficiently and effectively, it is important to operate the weapon system. OMS/MP is a document to quantify operational factors like as environment, mission, mode etc. It is important data to perform RAM analysis in early weapon development phase and operate better a weapon system. This paper present a process and framework of OMS/MP for a naval ship with a deep analysis of relevant domestic and abroad case studies. It propose OMS/MP analysis framework based on wartime scenario and mission area analysis. This result will contribute not only improvement for the availability of a naval ship but also enhancement of RAM analysis process.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1090-1097
• /
• 2000

Predicting building energy use can be useful to evaluate its energy performance. This study proposed empirical approach for predicting building energy use with regression analysis. For the empirical analysis, simple regression models were developed based on the historical energy consumption data as a function of daily outside temperature, the predicting equations were derived for different operational modes and day types, then the equations were applied for predicting energy use in a building. BY selecting a real building as a case study, the feasibilities of the empirical approach for predicting building energy use were examined. The results showed that empirical approach with regression analysis was fairly reliable by demonstrating prediction accuracy of $pm10%$ compared with the actual energy consumption data. It was also verified that the prediction by regression models could be simple and fairly accurate. Thus, it is anticipated that the empirical approach will be useful and reliable tool for many purposes: retrofit savings analysis by estimating energy usage in an existing building or the diagnosis of the building operational problems with real time analysis.

• 서비스연구
• /
• 제11권4호
• /
• pp.43-55
• /
• 2021

본 연구는 OECD 회원국들을 대상으로 의료서비스의 운영효율성과 품질효율성을 비교 분석하였다. 이를 위하여 2017~2019년의 OECD 보건통계(Health Statistics) 자료를 이용하였다. 분석 방법으로는 산출지향형(output-oriented) 규모수익가변(VRS: Variable Returns to Scale) 모형을 적용하여 초효율성(super efficiency)을 측정하였다. 분석결과, 운영효율성의 상위 그룹에는 스위스, 한국, 이탈리아, 노르웨이, 오스트리아, 네덜란드, 중위 그룹에는 캐나다, 그리스, 덴마크, 멕시코, 미국, 영국, 체코, 프랑스, 핀란드, 헝가리, 호주, 하위 그룹에는 벨기에, 독일, 스페인이 포함되었다. 품질효율성의 상위 그룹에는 노르웨이, 스위스, 스페인, 중위 그룹에는 그리스, 덴마크, 멕시코, 미국, 영국, 캐나다, 프랑스, 핀란드, 헝가리, 호주, 하위 그룹에는 네덜란드, 독일, 벨기에, 오스트리아, 이탈리아, 체코, 한국이 해당되었다. 2018년을 기준으로 OECD 회원국별로 효율성을 비교 분석한 결과, 운영효율성이 가장 효율적인 한국은 품질효율성이 비효율적이었다. 한국(0.998)은 그리스(0.422), 스위스(0.207), 스페인(0.371)을 벤치마킹하여 기대수명을 0.2(0.2%), 주관적 건강 인지를 44.2(138.1%)씩 개선하여 품질효율성을 향상시켜야 한다. 이는 국내에서 기대수명이나 유병률 같은 객관적 지표로 건강상태를 측정하고 있지만, 의학적 진단 여부와 별개로 국민들이 본인의 건강에 관하여 주관적으로 평가하는 것을 관리할 필요가 있음을 의미한다. 본 연구는 운영효율성에 초점을 맞춘 대부분의 선행연구들과 다르게 운영효율성과 품질효율성을 함께 측정했다는 점에서 학술적인 시사점을 지닌다. 또한 OECD 회원국별 의료서비스 산업의 효율성을 비교 분석함으로써, 국내 의료서비스 산업의 국제적인 경쟁력 수준을 확인하고 효율성 개선 방안을 제시했다는 점에서 실무적인 시사점을 지닌다.

• 정보처리학회논문지D
• /
• 제14D권6호
• /
• pp.689-700
• /
• 2007

정보시스템 운영리스크를 최소화하고, 장애시간 동안의 영업기회 손실비용 규모를 줄이기 위해서는 장애의 예방과 사전준비가 필요하다. 그런데 장애가 발생할 경우, 대부분의 기업에서는 장애발생 직후에 대응과 복구 조치를 취하고 있다. 프로그램 개발자나 시스템운영자들은 과거의 경험과 직관에 의존하여 장애를 관리하고 있을 뿐, 장애를 체계적으로 관리하고 사전에 예방하는 사례를 찾아보기가 힘든 실정이다. 본 논문은 정보시스템 운영리스크의 관점에서, 디스크 장애예방을 위한 피해저감모델의 개발에 초점을 맞추었다. 연구모델은 디스크장치에서 정보시스템 운영리스크가 발생하는 위험원인, 그리고 이러한 원인들을 사전에 점검하는 점검주기, 점검에 필요한 운영규정으로 구성된다. 또한 정보시스템 부문의 하드웨어 장애요인 중에서 가장 크게 나타나고 있는 디스크 장애에 대하여 피해저감모델을 적용함으로써 활용 가능성을 보여 준다.