• 대한교통학회지
• /
• 제27권1호
• /
• pp.63-71
• /
• 2009

본 연구의 목적은 이용자 입장에서 정시성이 열악한 노선들을 파악하는 것이다. 이를 위해 서울시의 도심으로 향하는 간선노선을 대상으로 BMS자료를 이용하여 노선별 배차간격의 오차율과 운행시간의 오차율을 계산한 후, 자료 포락분석기법을 이용하여 두 지표를 통합한 노선별 정시성을 분석하였다. 그 결과를 통하여 노선들과 교통권역들의 정시성을 비교하고, 정시성이 열악한 노선들을 개선할 필요성과 이용자들에게 현실을 감안한 운행스케줄을 제시할 필요성이 있음을 제안하였다. 향후 연구로는 BMS와 교통카드 시계열 자료를 이용함으로써 각 노선의 다른 운행환경을 반영한 정시성 범위를 파악하여 노선별 정시성 평가틀을 개발하고, 정시성이 열악한 노선들에 대한 개선방안을 제시할 필요가 있음을 제안하였다.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.172-177
• /
• 2006

본 연구에서는 배전계통의 부하지점의 부하형태에 따른 정전비용의 영향을 고려하여 분산전원을 설치함으로써 운영비용 및 정전비용을 최소화하는 방안을 제안하였다. 가정용, 산업용, 상업용, 사무용 및 농업용 등 부하형태를 실제 계통과 유사하게 고려함으로써 정확한 신뢰도 지수와 운영비용을 구할 수 있고, 이를 통해 총 운영비용 최소화에 더욱 접근할 수 있다. 특히 정전시 각 부하지점에 설치된 분산전원에 의해 전력이 공급되어 전력구입 비용과 정전비용의 경우 효과적으로 감소됨을 알 수 있었으며, 정전빈도와 정전시간이 감소되어 전력 공급률이 향상되어 신뢰도 지수가 좋아졌음을 알 수 있었다.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1618-1625
• /
• 2015

The reliability of catenary system is very important for uninterrupted train operation as it supplies electric power to train without redundant facilities. This paper provides a systematic approach to the reliability analysis of the catenary system based on FMECA procedures defined by global standards such as MIL Std 1692a and IEC 60812. Field failure data collected from the operation and maintenance of high-speed railway catenary system for 9 years are used to derive critical failure modes and to evaluate the criticality of the failure modes. Evaluation of the criticality are carried out by quantitative procedures defined by MIL Std 1692a and by criticality matrix defined by IEC 60812. FMECA results suggests that three critical failure modes should be checked carefully during maintenance work, which include strand break of dropper and voltage equalizing wire, power supply failure of feeder. Maintenance procedure of catenary system in order of importance is suggested too. These results can be applied to maintenance planning and design of catenary system to improve the reliability of electric railway system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1510-1513
• /
• 1999

Carried out simulation for yearly peak and March load time of the KEPCO Power System in 1999. Analysis of the problems in power system operation by powerflow, fault and stability study. Establishment of power system optimal operating plan by installation of power system stabilizer.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.8-15
• /
• 2012

GO-FLOW기법은 시스템이 정상적으로 작동할 가능성을 평가할 수 있는 기법으로써 신호선과 연산자를 사용하여 시스템을 GO-FLOW Chart로 모델화하고, 이 GO-FLOW Chart를 순차적으로 해석하여 시스템의 신뢰도를 평가하는 기법이다. 그러나 GO-FLOW기법은 1개의 시스템 구성요소를 여러 개의 연산자로 모델링하므로 시스템 흐름도와 상이한 GO-FLOW Chart가 작성될 수 있고, 시간점을 지정하여 시간을 모델링하므로 실제 운전시간에 따른 신뢰도 변화를 평가하기 어렵다. 따라서 본 연구에서는 구성요소의 기능(정상/고장)을 기준으로 시스템의 신뢰도를 평가하는 기법을 개발하였다. 본 기법은 구성요소의 운전상태와 상관없이 그 기능을 유지할 가능성을 기준으로 시스템의 신뢰도를 평가하며, 1개의 구성요소는 1개의 연산자로 모델링하므로 시스템 흐름도와 거의 유사한 모델도를 작성할 수 있고, 실제시간을 반영한 연산자를 사용하여 실제시간에 따른 시스템의 신뢰도를 쉽게 평가할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.397-399
• /
• 2000

This paper presents a method for assessing reliability indices of transmission system. Because successful operation of electric power under the deregulated electricity market depends on transmission system reliability management, quantity evaluation of transmission system reliability is very important. The key point idea is based on that the reliability level of transmission system is equal to reliability level difference of between composite power system(HLII) and generation system(HLI). It is sure that risk indices of reliability of composite power system are larger than those of generation system. It is the reason that composite power system includes uncertainties and capacity limit of transmission lines. The characteristics and effectiveness of this methodology are illustrated by the case study using MRBTS.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 추계학술대회
• /
• pp.269-277
• /
• 2000

The component reliability database is required in PSA (Probabilistic Safety Analysis) for NPP (Nuclear Power Plant). We have applied a generic database to the PSA for the Korean NPPs, since there is no specific component reliability database. Therefore we are developing the plant-specific component reliability database for domestic NPPs. We also extend the experience and knowledge of PSA and component reliability database for NPP to chemical industry We collect the raw data like component operation history and maintenance history and then input the required data for the component reliability database through failure analysis. With the database, we can not only perform PSA with real data but also perform maintenance optimization.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.316-324
• /
• 2017

Purpose: The purpose of this study is to determine the replacement cycle applied age replacement policy by reliability analysis based on railway vehicle contactor's failure history data. Method: We performed reliability analysis based on railway vehicle contactor's failure history data. We found a suitable distribution by goodness of fit test and predicted the reliability through estimation of scale & shape parameter. Considering cost information we determined the replacement cycle that minimize the opportunity cost. Result: Suitable distribution was the Weibull and scale parameter & shape parameter are estimated by reliability analysis. The replacement cycle was predicted and MTTF, $B_6$ percentile life were suggested additionally. Conclusion: We confirmed that failure rate type of railway vehicle contactor is degradation model having a time dependent characteristic and examined the replacement cycle in our country's operating environment. We expect that this study result contribute to railway operation agency for maintenance policy decision.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권2호
• /
• pp.104-113
• /
• 2018

Purpose: This paper proposes the non-periodic preventive maintenance policy based on the level of cumulative hazard intensity. We aim to construct a cost-effectiveness on the proposed model with relaxing the constraint on reliability. Methods: We use the level of cumulative hazard intensity as a condition variable, instead of reliability. Such a level of cumulative hazard intensity can derive the reliability which decreases as the frequency of preventive maintenance action increases. We also model the imperfect preventive maintenance action using the proportional age setback model. Conclusion: We provide a numerical example to illustrate the proposed model. We also analyze how the parameters of our model affect the optimal preventive maintenance policy. The results show that as long as high reliability is guaranteed, the inefficient preventive maintenance action is performed reducing the system operation time. Moreover, the optimal value of the proposed model is sensitive to changes in preventive maintenance cost and replacement cost.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1412-1417
• /
• 2011

Safety is soaring up as a core value in accordance with the recent improvement of operating speed & incidents. rolling stock is a kind of system which works together with several components. one component has an effect on the sub-system, which can cause to the train safety operation, therefore reliability management of the major components of rolling stock is a kind of solution to the safety operation of train, but realistically maintenance in korea performed based on period rather than TBO of major components, but Japan does new maintenance system based on the major components, which optimizes maintenance tasks. actually Japan can apply to new maintenance system because they are ready in planning step but in this study, making a reliability data of major components and review the adaptability of new maintenance system to the rolling stock operating in Ansan line.