• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.116-119
• /
• 1998

Abstract-In paper, an operation support software for combustion control of refuse incineration plant is developed using fuzzy model and genetic algorithm. It has two major modules which are simulation module and optimal operation module. In simulation module modelling is performed to obtain fuzzy model of the refuse incineration plant and obtained fuzzy model predicts outputs of the plant when inputs are given. This module can be used to obtain control strategy, and train and enhance operators' skill by simulating the plant. And in optimal operation module, genetic algorithm searches and finds out optimal control inputs over all possible solutions in respect to desired outputs. In order to testify proposed operation support software, computer simulation was carried out.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.586-591
• /
• 2015

This paper proposes a force feedback system of telepresence robot for remote operation. The ultrasonic sensors attached at the robot detect the obstacles, and generate the force to the operation joystick. In order to consider the network delay, we developed the fuzzy control system using ultrasonic data and robot speed. The method to calculate the force vector from the ultrasonic data is also presented to operate the robot more accurately. The simulation and experimental results are presented to verify the safe and accurate operation of the proposed system.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.263-269
• /
• 2018

In this study, a selective inverter operation between a 2-level voltage source converter (VSC) and a 3-level T-type VSC (3LT VSC) is proposed to improve the efficiency of a 3LT VSC. The 3LT VSC topology, except for its neutral-point switches, has similar operations as that of the 2-level VSC. If an operation mode is changed according to efficiency, the efficiency can be improved because efficiencies of each methods are depending on current and MI (Modulation Index). The proposed method calculates the power losses of the two topologies and operates as the having lower losses. To calculate the losses, the switching and conduction losses based on the operation mode of each topology were analyzed. The controller determined the operation mode of the 2- or 3-level VSC based on the power loss calculated during every cycle. The validity of the proposed control scheme was investigated through simulation and experiments. The waveform and average efficiency of each method were compared.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.171-177
• /
• 2012

The autonomous microgrid is a system that is autonomously operated depending on the grid and internal load condition, without the operator's intervention. In this study, a control algorithm for the microsource and an operation algorithm for the microgrid are proposed to realize the autonomous microgrid system. In addition, a microgrid operation system based on the operation algorithm is proposed. The electromagnetic transient program is used by the proposed microsource control algorithm for simulation, and the validity of the algorithm is verified. The proposed operation system is verified based on a case study using a simulator and test devices.

• 한국항공운항학회지
• /
• 제29권2호
• /
• pp.111-116
• /
• 2021

Normal Operation Safety Survey (NOSS) is a safety management tool used by air traffic control organizations to measure data related to threats and errors to proactively prevent accidents before they occur. NOSS was developed to be applied to the air traffic control field according to the concept of Line Operation Safety Audit (LOSA) conducted by airlines to reduce human errors in the cockpits. Safety management based on data is crucial for the prevention of control-related accidents, and the competency of observers for this is important for the successful implementation of NOSS. Based on LOSA implementation experiences and expert interviews, this paper introduces the international NOSS methods and discusses the key factors required for effective observation and the implementation methods and implications of NOSS observer training.

• 한국습지학회지
• /
• 제24권1호
• /
• pp.38-43
• /
• 2022

스마트(Smart) 하수처리장은 하수처리 전 과정에 대한 ICT 기반의 실시간 모니터링, 원격 제어 관리 및 지능화 체계를 구축하여 안전하고 깨끗한 물환경을 조성하는 것을 의미한다. 이러한 스마트 하수처리장의 핵심이 되는 기술이 계측기를 활용한 운전제어 기술이라 할 수 있다. 본 연구진은 국내에서 진행중인 하수처리장 지능화 연구사업들을 참고하여 지능화사업 구축 시 필요한 운전제어 기술들을 분석하고 제시하였다. 분석 결과 규모별 제어, 반류수 제어, 연계처리수 제어, 약품량 제어, 동절기 운영제어, 총 유기탄소 제어까지 총 6개의 제거 기술에 대해 제시하였다. 규모별로는 소규모와 중규모 대규모로 구분할 수 있는 기준을 제시하였고, 반류수 제어의 경우 반류수를 관리할 수 있는 수질 및 유량 센서의 위치를 제시하였다. 연계처리수 제어의 경우 연계처리수가 하수처리장에 미치는 영향과 제어 지점을 제시하였으며, 약품주입량 제어의 경우 지능형 하수처리장 도입에 따라 약품 주입량을 최적화할 수 있는 시스템을 제시하였다. 동절기 운영의 경우 수온 저하에 따른 질산화 저하를 고려하였을 때 제어해야 하는 센서와 펌프를 제시하였다. 총 유기탄소 제어의 경우 향후 오염총량제를 고려한 연동 시스템을 제시하였다. 이러한 운전제어 시나리오들은 향후 지능형 하수처리 알고리즘과 시나리오에 사용될 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국항행학회논문지
• /
• 제20권6호
• /
• pp.519-527
• /
• 2016

본 논문에서는 해운선사의 운영비용 관리를 위해서 현존선의 항차 단위의 선박 경제운항 기술을 위한 개념 연구를 수행하였다. 해운산업 현황과 경제운항 기술개발 현황, 기술 요구사항 및 선박 운영에 필요한 비용 요소를 분석하여 경제운항 관리요소를 도출하였다. 개별 항차를 기준으로 현존선의 경제운항은 연료비와 항만에서 사용되는 비용을 최소화 하는 것이며, 이를 위해서 저속운항, 정속운항, 배수량 관리, 최적 트림, 최적 항로 선정, 터미널 생산성 관리, 선박 에너지 절감 활동을 관리한다. 최적항로, 터미널 생산성 관리는 절감된 시간으로, 저속운항, 정속운항, 최적트림, 선박 에너지 절감은 권고사항 만족 여부를 관리한다.

• 한국수자원학회논문집
• /
• 제31권1호
• /
• pp.105-113
• /
• 1998

홍수기 중 저수지 운영은 이수와 치수를 고려한 전반적인 홍수기 저수지 운영확 홍수예측시 임의의 저수지 수위에서의 홍수시 저수지 운영으로 구분할 수 있다. 본 연구는 홍수시 저수지운영에 관한 것으로 전반적인 홍수시 저수지 운영방안에 관해 논의하고자 한다. 현행의 홍수시 저수지 운영을 위해서는 확보된 홍수조절용량을 토대로 각종 수문모형의 불확실성과 기술적인 한계, 제약조건 등을 고려한 양적인 홍수조절 방안이 마련되어야 한다. '저수지 홍수변환법'은 이러한 양적인 홍수조절 방안중의 하나로 무피해방류량 이상의 홍수유입량에 대해 댐의 안전을 고려하여 적절한 방류량을 결정하는 일련의 절차이다. 본 연구에서는 기 발표된 '저수지 홍수변환법'에 대한 보충설명과 함께 전반적인 홍수시 저수지 운영방안을 논의하였다.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.830-837
• /
• 2015

A study which is to develop the low-cost urban railway system for low-density line such as Gwang-ju subway Line 2 is in progress, and its TCS(Train Control System) is required as an economic system which is able to train operation suitable in low-density line. We have developed the signaling equipment which is configured with automatic block system between stations, and the control center's equipment in order to meet the requirements of TCS mentioned above. In this paper, we propose the control procedure of ATS to be required for train operation management in the low-density line such as Gwang-ju subway Line 2. The control procedure of ATS considered all features such as the requirements analysis for train operation management, the functions of train control system to be applied and the block type. Also, it considered the station(interlocking, passenger, turn-back) type, station control(stop, route, departure, turn-back departure, turn-back) type, and train operation management for exiting and entering depot. The ATS control procedure proposed in this paper has an advantage in the cost and efficiency through unification and optimization of its function. And in cost of operating and maintenance, the ATS system has a feature that can be significantly reduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.81-86
• /
• 1991

The iterative learning operation has been utilized in the temperature Control of a batch reactor. A generic form of feedback-assisted first-order learning control scheme was constructed and then various design and operation modes were derived through convergence and robustness analysis in the frequency domain. The proposed learning control scheme was then implemented on a bench scale batch reactor with the heat of reaction simulated by an electric heater. The results show a great improvement in the performance of control as the number of batch operations progressed.