• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.218-221
• /
• 2009

Solid oxide fuel cells (SOFCs), as high-temperature fuel cells, have various advantages. In some merits of SOFCs, high temperature operation can lead to the capability for internal reforming, providing fuel flexibility. SOFCs can directly use CH4 and CO as fuels with sufficient steam feeds. However, hydrocarbons heavier than CH4, such as ethylene, ethane, and propane, induce carbon deposition on the Ni-based anodes of SOFCs. In the case of the ethylene steam reforming reaction on a Ni-based catalyst, the rate of carbon deposition is faster than among other hydrocarbons, even aromatics. In the reformates of heavy hydrocarbons (diesel, gasoline, kerosene and JP-8), the concentration of ethylene is usually higher than other low hydrocarbons such as methane, propane and butane. It is importatnt that ethylene in the reformate is removed for stlable operation of SOFCs. A new methodology, termed post-reforming was introduced for removing low hydrocarbons from the reformate gas stream. In this work, activity tests of some post-reforming catalysts, such as CGO-Ru, CGO-Ni, and CGO-Pt, are investigated. CGO-Pt catalyst is not good for removing ethylene due to low conversion of ethylene and low selectivity of ethylene dehydrogenation. The other hand, CGO-Ru and CGO-Ni catalysts show good ethylene conversion, and CGO-Ni catalyst shows the best reaction selectivity of ethylene dehydrogenation.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.191-195
• /
• 2003

Zinc acetate has been proposed and used to evaluate ionic zinc as a means to reduce reactor radiation buildup at several nuclear plants. Thermodynamic analysis of the aqueous zinc system using reliable data shows that the stability of the hydrolyzed zinc species increases with pH and temperature. Adsorption kinetics and isotherm studies were carried out to investigate the mixed resin performance of the zinc adsorption. The equilibrium isotherms of the zinc adsorption onto nuclear grade resin indicate that the data correlate well with the Langmuir model and that the adsorption is physical in nature. The maximum capacity according to the Langrnuir model is about 0.6meq/g for an initial zinc concentration of 100ppm at $50^{\circ}C$. The use of natural zinc could result in the generation of a $^{65}Zn$ activity with about $500{\mu}Ci/mL$ of resin after 12 months of operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5304-5309
• /
• 2013

The degradation of methylethylkeone(MEK) was investigated by the continuous single module photocatalytic reactor. Operational conditions were initial concentration of MEK, intensity of photon flux, and activity change according to the long time operation. The photocatalytic degradation was decreased with the increase of MEK concentration, and the degree of decrease was larger at higher flow rate. Removal efficiency of photocatalytic reactor was decreased with the increase of reactor diameter and lamp wavelength under the same residence time condition. Continuous single module photocatalytic reactor was successfully operated without any activity drop during 120hrs operation.

• Quality Improvement in Health Care
• /
• v.14 no.1
• /
• pp.49-54
• /
• 2008

Background : This study was to reduce incidence of falls by analyzing actual problem and drawing out improvement plan applicable to the clinical practice through operation of the staff nurses-centered fall peer review group. Method : The fall peer review group was composed of 8 nurses having patient nursing experience for over 5 years, and each of fall cases was reviewed and the root cause was analyzed. As a result, it was found that the patients and their families did not fully understandthe content of the education, and the staff nurses did not completely inspect the risk factors of falls and perform immediate intervention when patient's condition changed. Based on the above-mentioned results, improvement activity was conducted for the purposes of consolidating patients education method and supplementing computerized system to support nurses' decision making as well as devices and facilities. Result : As a result of conducting improvement activity in the aspects of education for patients, support of nurse's decision-making, and devices and facilities through operation of the staff nurses-centered fall peer review group, falls decreased by 9.5% compared to before improvement activity. Conclusion : It is concluded that operation of the clinical nurses-centered fall peer review group played a role of promoter to draw out practical and applicable improvement plan to the clinical practice and apply directions of the field-centered, and increased nurses' interest in falls and ultimately, reduced incidence of falls. Therefore the Center will continue to operate the staff nurses-centered peer review group, and recommends participation of nurses who actually take the charge of nursing patients in further analysis of patients' safety accidents.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.129-135
• /
• 2006

he purpose of this study is to measure bio-signal to investigate the driver's physiological response change under real situation using train simulator. The train simulator used in this study is KTX model and according to changes of driving situation, The bio-signal controlled by autonomic nervous system, such as GSR(Galvanic Skin Response), SpO2(Saturation percent O2), HR(Heart Rate), ECG(Electrocardiograph), EEG(Electroencephagram) and movement and response of eye were measured. Statistically significant difference in bio-signal data and eye movement activity pattern were investigated under several different driving speeds using analysis of variance (p<0.05). The GSR and HR value measured in average and mission speed operation is higher than in high-speed operation. β wave of EEG in average speed operation become more activated than in high speed operation. In accordance with a characteristic of rail vehicle, movement and response of eye in high-speed operation requiring relatively simple maneuver become less activated than in either average or mission speed operations. Conclusively, due to more careful driving controls in average and mission speed operation are required than in high-speed operation, level of mental and physical stresses of train driver was increased and observed through changes of bio-signal and eye movement measured in this study.

• Clinics in Shoulder and Elbow
• /
• v.3 no.1
• /
• pp.44-48
• /
• 2000

Weaver-Dunn's operation for acromioclavicular injury yields satisfactory results in most cases. Although clavicular prominence can recur, it is not frequently symtomatic, but it can cause serious impairment of shoulder function in young and active patients. The authors performed reconstruction of coracoclavicular ligament with an autogenous hamstring tendon graft in a 31 years old electrician with recurrence of clavicular prominence accompanied by pain and limitation of overhead activity. The hamstring tendon and two coracoclavicular sutures looped under the coracoid process were passed through holes in the clavicle and around the clavicle in overreduced position. Even though clavicular prominence recurred somewhat, the modified UCLA score by Rockwood improved to 17 from 11/20 at 2 years after operation and the patient had no restriction in working as an electrician. Symptomatic patient with recurrent clavicular prominence after Weaver-Dunn's operation can benefit from reconstruction of coracoclavicular ligament with a hamstring tendon.

• Journal of Radiation Industry
• /
• v.11 no.3
• /
• pp.173-179
• /
• 2017

The small-scale electroplating device was designed and fabricated for Ni-63 sealed source (foil type) with a high specific activity needed for production of betavoltaic battery. The condition of Ni electroplating was optimized by using fabricated electroplating device to establish a Ni-63 electroplating condition on the Ni foil. The results showed that the optimum surface morphology and thickness of Ni deposit was obtained for 1,758 seconds at a current density of $15mA{\cdot}cm^{-2}$ with 0.5% tween 20. Radioisotope Ni-63 electroplating was implemented under established condition. The radioactivity of Ni-63 sealed source was calculated to $28mCi{\cdot}cm^{-2}$, and the thickness of Ni-63 deposit was about $2.4{\mu}m$.

• 대한공업교육학회지
• /
• v.45 no.2
• /
• pp.1-20
• /
• 2020

The purpose of this study is to develop an assembly-type liquid level control experimental equipment and a hands-on activity task that can be applied to the class so that students studying the chemical industry can easily understand the liquid level control. For this purpose, the content elements related to liquid level control in the chemical industry practice course of the 2015 revised curriculum was analyzed, a hands-on activity task with an assembly-type liquid level control experimental equipment was and developed. And then, expert verification was also performed and the hands-on activity task was applied to 19 students of S meister high school. The results obtained through this are as follows. First, the existing completion-type liquid level control experimental equipment was explored, and based on this, a new assembly-type liquid level control experimental equipment that can be assembled by students and used for practices was designed and manufactured. Second. by analyzing the contents of the NCS-based 'Chemical Process Maintenance Operation' practical course of the 2015 revised curriculum, learning contents related to level control were extracted. Among the contents related to the level control, the practice with understanding the process flow chart, manufacturing the level control experimental equipment, measuring the flow rate, and checking the level control phenomenon were conducted with the assembly-type liquid level control experimental equipment to systematically learn the level control.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.4
• /
• pp.412-420
• /
• 2011

Secretion of cellobiase occurred in a brefeldin A (BFA) uninhibited manner in the filamentous fungus Termitomyces clypeatus. Fluorescence confocal microscopy revealed that application of the drug at a concentration of 50 ${\mu}g$/ml caused arrest of Spitzenkorper assembly at the hyphal tip. This resulted in greater than 30% inhibition of total protein secretion in the culture medium. However, the cellobiase titer increased by 17%, and an additional 13% was localized in the vacuolar fraction en route secretion. The secretory vacuoles formed in the presence of the drug were also found to be bigger (68 nm) than those in the control cultures (40 nm). The enzyme secreted in the presence and absence of BFA revealed a single activity band in both cases in native PAGE and had similar molecular masses (approx. 120 kDa) in SDS-PAGE. The BFA enzyme retained 72% of native glycosylation. It also exhibited a higher stability and retained 98% activity at $50^{\circ}C$, 93.3% activity at pH 9, 63.64% activity in the presence of 1M guanidium hydrochloride, and 50% activity at a glucose concentration of 10 mg/ml in comparison to 68% activity, 75% activity, 36% activity, and 19% activity for the control enzyme, respectively. The observations collectively aimed at the operation of an alternative secretory pathway, distinct from the target of brefeldin A, which bypassed the Golgi apparatus, but still was able to deliver the cargo to the vacuoles for secretion. This can be utilized in selectively enhancing the yield and stability of glycosidases for a successful industrial recipe.

• Journal of Engineering Education Research
• /
• v.9 no.3
• /
• pp.37-48
• /
• 2006

The purpose of this study is to investigate the response and the recognition of students of blended learning. Set up the following study problem in order to achieve a study purpose. How are a response and a recognition of learner about blended learning? To study, Designed blended learning environment, and analyzed a bulletin board and a log file, and made up a question for 15 weeks after proceeding a class in order to recognition and response about the results operating blended learning. The results as follows: First, A lot of students prefer education in blended learning environment, and participate positively in activity in on-line activity. Second, When study in blended learning environment about media be prudent must select. Third, Confirmed the fact that various role of Instructor needed. Therefore, the design and operation of blended learning, which mixes traditional teaching methods and a modern on-line method, is meaningful.