• 산업공학
• /
• 제23권3호
• /
• pp.221-228
• /
• 2010

With the development of science and technology, modern submarines are equipped with high technology devices and multi-functioned precise armaments, consequently, acquisition cost as well as maintenance cost of the submarines are getting higher and higher. However, tight defense budget forces navy to significantly reduce military operating and maintenance costs. In this study, the maintenance and operating costs of submarine Jangbogo-II are estimated through M&S (Modeling and simulation) methodologies in order to reasonably and consistently work out the requirement verification system of Jangbogo-II. The maintenance and operating costs of Jangbogo-II along the next 25 years are estimated as 312.65 billion won via engineering analysis methods while 312.69 billion won from PRICE Model, which shows only 0.04 billion won differences as a whole. This study is expected to be able to provide meaningful decision making data for not only short and/or mid term operating planning but military budgeting.

• Journal of Preventive Medicine and Public Health
• /
• 제26권3호
• /
• pp.442-456
• /
• 1993

Financial stability is the foremost prerequisite for the continuous growth and development of hospitals. The present study aimed at developing a deterministic model using the factors which affect the hospitals profitability and at discovering which factor affected the hospital profitability. The study conducted questionnaire surveys on all general hospitals, with the exception of special hospitals, with over eighty hospital beds. Of the 274 subject hospitals, 136 of them, consituting 49.6% of the whole, were used in the study. The results are as follows. 1. In the deterministic model, outpatient revenue was affected more by the number of physician visits than by outpatient service intensity. Inpatient revenue was found to be affected more by the number of discharged patients than by inpatient service intensity. However, the increase rate of the service intensity not only contributed in stepping up the operating margin by $4{\sim}8%$ in outpatient and $3{\sim}6%$ in inpatient, but it was statistically significant. 2. Among the factors which determined the operating cost within the deterministic model, the number of patients had a greater impact on the operating cost than the resource consumption per patient. 3. The resource consumption per patient were proved to have the greatest effect on the profitability within the probabilistic model. The management cost per adjusted patient, in particular, was proven to have a statistically significant effect on the profitability in all hospitals.

• 한국국방경영분석학회지
• /
• 제9권1호
• /
• pp.69-74
• /
• 1983

This article presents a deterministic inventory model for situations in which, during the stockout period, a fraction ${\beta}$ of the demand is backordered and the remaining fraction $1-{\beta}$ is lost. By defining a time proportional backorder cost and a fixed penalty cost per unit lost, a convex objective function representing the average annual cost of operating the inventory system is obtained. The optimal operating policy variables are calculated directly. At the extremes ${\beta}\;=\;1$ and ${\beta}\;=\;0$ the model presented reduces to the usual backorders and lost sales case, respectively.

• 에너지공학
• /
• 제11권4호
• /
• pp.317-323
• /
• 2002

본 논문은 효율향상 프로그램의 비용효과 분석을 위한 대리발전기법과 수요감소기법이 조합된 발전운전 회피비용 계산 방법론을 제안하였다. 수용가 전력사용 행태에 따른 효율향상 수요관리 자원의 가동지수를 도입하여 보급된 고효율기기의 시간별 운전용량을 계산하는 데 활용하였다 또한, 기준수요에서 최대수요시간의 운전용량을 그 시간에 기여하는 최대수요 절감량으로 계산하였으며, 발전운전 회피비용을 이용한 효율향상 수요관리 자원의 영향을 평가하였다. 수요관리 전후의 효과분석을 위한 사례연구 모델로 IEEE-RTS를 활용하였으며, 수요관리 효과로 인한 각 발전기의 발전량, 발전비용 및 계통한계비용(SMP)의 변화 등을 분석하였다. 본 방법은 단기 수요관리 효과를 예측함은 물론 현재 실시하고 있는 효율향상 수요관리 자원의 효과를 추정하는데 활용 가능하고, 계산결과는 수요관리자원의 효과분석을 위한 기초자료로 활용 가능하다.

• 한국항해학회지
• /
• 제8권1호
• /
• pp.1-16
• /
• 1984

The economical property of a shipping enterprise, as well as other transportation industries, is determined by the difference between the freight earned and expense paid. This study can be regarded as a division of optimizing ship allocation to routes under the integrated port transport system. Fleet planning and scheduling require complicated allocations of cargoes to ships and ships to routes in order to optimize the given criterion function for a given forecast period. This paper deals with the optimum ship allocation problem minimizing the operating cost of ships in a shipping company. Optimum fleet operating for a shipping enterprise is very important, since the marine transportation is a form of large quantity transport requiring long-term period, and there is a strong possibility to bring about large amount of loss in operation resulting from a faulty ship allocation. Where there are more than one loading and discharging ports, and a variety of ship's ability in speed, capacity, operating cost etc., and when the amount of commodities to be transported between the ports has been determined, then the ship's schedule minimizing the operating cost while satisfying the transport demand within the predetermined period will be made up. First of all a formula of ship allocation problems will be established and then will be constructed to solve an example by the Integer Programming application after consideration of the ship's ability, supply and demand of commodity, amount of commodity to be transported, operating costs of each ship etc. This study will give good information on deciding intention for a ship oprator or owner to meet the computerization current with shiping management.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.167-175
• /
• 2011

효율적인 도로의 설계와 관리를 위해서는 도로건설의 경제성 분석이 중요하며 이를 위해서는 도로 상태별 차량별 유류소모량의 평가가 필요하다. 도로에서는 초기 건설비용, 유지보수비용, 차량운행비용, 지정체비용 등이 발생되는데, 도로의 경제성 분석을 위해서는 초기 건설비용, 유지보수비용 등과 같은 관리자비용과 차량운행비용, 지정체비용 등과 같은 이용자비용을 모두 포함한 사회적 비용이 고려되어야 한다. 이 중 차량운행비용은 교통량에 따라 그 비용이 변화되므로 차량운행비용 항목의 큰 부분을 차지하는 유류소모량 또한 교통량에 따라 변화하게 된다. 그런데 유류소모량은 차량의 주행속도 및 도로포장의 상태, 특히 평탄성에 따라 크게 변화되므로 도로의 경제성 분석을 위한 차량운행비용의 산정을 위해서는 주행차량에 대해 도로 상태에 따른 유류소모량을 평가하여 경제성 분석에 반영해야 할 필요가 있으나 아직 이를 고려하지 못하고 있는 상황이다. 본 연구에서는 국내에서 운행되는 승용차에 대해서 도로 상태별 유류소모량 추정모델을 개발하였다. 우선 우리나라의 교통시설 투자평가 및 도로건설의 예비타당성 조사에서 차량운행비용 산정을 위해 사용되고 있는 주행속도와 유류소모량의 관계식을 고찰하고, 승용차를 대상으로 도로포장의 평탄성에 따른 유류소모량 변화의 관계를 실제 도로에서 실측하여 평탄성과 유류소모량 변화의 관계를 분석하였다. 실험 결과, 평탄성에 따른 유류소모량의 변화는 평탄성이 1m/km 증가하였을 경우 100km 주행시 약 $80m{\ell}$ 정도의 비율로 유류소모량이 증가하는 것으로 확인되었다. 따라서 도로의 설계 및 유지관리에 있어서 보다 정확한 경제성 분석을 수행하기 위해서는 도로포장의 평탄성에 따른 유류소모량 변화를 고려해야 할 필요가 있다.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.33-39
• /
• 1998

This paper is related to economic design of tool-resetting period in NC machining. In NC lathe machining, the mean and variance of components dimension fluctuate in slow time and we should reset tool program to compensate the variation from the fluctuation. In this paper. we propose the procedure determining the optimal resetting period based on the total expected operating cost which consists of resetting cost and the quality cost related to dimension variation. As a case study, using experimental data about dimension changes of a lathe machining, we obtain the regression equations of mean and variance of the dimension fluctuation, total expected operating cost, and optimal resetting period.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.241-247
• /
• 1997

This paper is concerned with cost analysis model in free-replacement policy. The free-replacement policy with minimal repair is considered as follows; in a manufacturer's view point operating unit is periodically replaced, if a failure occurs between minimal repair and periodic maintenance time, unit is remained in a failure condition. Also unit undergoes minimal repair at failures in minimal-repair interval. Then total expected cost is calculated according to the parameter of failure distribution in a view of consumer's. The expected costs are included repair cost and usage cost: operating, fixed, minimal repair and loss cost. Numerical example is shown in which failure time of item has weibull distribution.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.287-295
• /
• 1995

This paper is concerned with cost analysis model in periodic maintenance policy. Generally periodic maintenance policy in which item is repaired periodic interval times. And in the article minimal repair is considered. Mimimal repair means that if a unit fails, unit is instantaneously restored to same hazard rate curve as before failure. In the paper periodic maintenance policy with minimal repair is as follows; Operating unit is periodically replaced in periodic maintenance time, if a failure occurs between minimal repair and periodic maintenance time, unit is replaced by a new item until tile periodic maintenance time comes. Also unit undergoes minimal repair at failures in minimal-repair-for-failure interval. Then total expected cost per unit time is calculated according to scale parameter of failure distribution. Maintenance cost factors are included operating, fixed, minimal repair, periodic maintenance and new item replacement cost. Numerical example is shown in which failure time of system has weibull distribution.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.89-98
• /
• 1996

This paper is concerned with cost analysis model in free -replacement policy under the periodic maintenance policy The free-replacement policy with minimal repairable item is considered as follows; in a manufacturer's view point operating unit is periodically replaced, if a failure occurs between minimal repair and periodic maintenance time, unit is remained in a failure condition. Also unit undergoes minimal repair at failures in minimal-repair interval. Then total expected cost per unit time is calculated according to maintenance period Tin a viewpoint of consumer's. The expected costs are included repair cost and usage cost: operating, fixed, minimal repair and loss cost. Numerical example is shown in which failure time of item has beta distribution.