• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.37-40
• /
• 2008

세대병합형 리모델링의 경우 벽체의 개구부의 형성이 필수적이다. 그리하여 선행연구를 바탕으로 23%의 개구부면적을 가질 경우 큰 강성의 저하나 강도의 저하가 없다는 판단 아래, 인방보의 형태가 다른 세 실험체를 계획하여 횡력 가력 실험을 실시하였다. 슬래브를 인방보로 가지는 CW-RS는 형상비의 증가에 따른 휨파괴가 지배적이었고, CW-RBS와 CW-CS의 경우 인방보의 모멘트 분담에 의해 벽판의 전단 파괴 현상이 지배적이었다. 인방보의 면적에 따라 강도와 강성의 감소율이 영향을 받았으며 개구부의 형태가 결정하는 인방보와 벽체와의 접합 면적이 벽체의 거동을 지배한다고 생각된다.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.61-66
• /
• 2008

It is important to calculate the exact crack opening area in the cracked pipe subjected to axial force and bending moment. Among many solutions for obtaining the crack opening displacement, Paris-Tada's expression, which is derived from energy method, is open used in fracture analysis for piping crack problems because of its simplicity. But Paris-Tada's equation has conservativeness when radius over thickness ratio(R/t) is ten or less, for it is based on the stress intensity factor solution having a compliance function derived from a simple shell theory. In this paper we derived a new expression using a different stress intensity factor solution which is able to consider the variation of compliance through wall thickness in a cracked pipe. Conservativeness of both equations was examined and compared to finite element analysis results. Conservativeness of the new equation is decreased when R/t > 10 and increased slightly when R/t < 10 compared with Paris-Tada's. But Both equations were highly conservative when R/t < 10 compared with finite element analysis results.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.451-460
• /
• 2010

리모델링에는 여러 형태가 있을 수 있다. 그 중 건축주나 리모델링 수행자가 선호하는 방법이 두 개의 주거 공간을 하나로 만들어 평면 확장을 목표로 하는 세대 병합형 리모델링이다. 그러나 이러한 방법을 현재 국내에서 리모델링 대상이 되고 있는 벽식 구조의 아파트에 적용할 경우 주요 횡력 저항 요소인 전단벽에 큰 손상을 가하게 될 수 있다. 그러나 아직 이러한 주요 구조 부재인 철근콘크리트 전단벽에 개구부가 발생할 경우의 명확한 손상 정도를 정의 해주는 연구는 진행되고 있지 않은 실정이다. 현행 ACI 기준은 이러한 철근콘크리트 전단벽 내의 개구부에 대한 명확한 고려 방안을 제시하지 않고 있다. 반면 AIJ 기준은 철근콘크리트 전단벽 내부의 벽체에 대한 고려 방안으로 강도 저감률 $\gamma$를 제시하고 있다. 그러나 이 강도 저감률은 탄성 판 이론으로부터 제시된 것으로 철근콘크리트 부재에 있어서의 강도 저감률을 제대로 표현하지 못하고 있는 실정이다. 그러므로 이 연구에서는 AIJ에서 제시하고 있는 강도 저감률 $\gamma$에 대하여 현재까지 진행되었던 실험 결과에 대한 통계적 분석과 유한요소해석을 통한 변수 분석을 통해 개구부에 의한 강도 저감률에 대한 연구를 수행하였다. 통계적 분석 결과 현재 제시되어 있는 강도 저감률은 개구부의 벽체 면적에 대한 비율만을 변수로 설정하여 그 저감률이 실험 결과보다 크게 나타나고 있었다. 또한 개구부의 형상비를 면적과 통합적으로 고려하며 철근비에 대한 고려를 하지 못하는 것으로 나타났다. 이에, 기존의 실험 결과와 이를 토대로한 유한요소해석을 통한 변수분석을 수행하여 새로운 강도 저감률을 제안하였다.

• Wind and Structures
• /
• 제16권1호
• /
• pp.47-60
• /
• 2013

A dominant opening in a windward wall, which generates large internal pressures in a building, is a critical structural design criterion. The internal pressure fluctuations are a function of the dominant opening area size, internal volume size and external pressure at the opening. In addition, many buildings have background leakage, which can attenuate internal pressure fluctuations. This study examines internal pressure in buildings for a range of dominant opening areas, internal volume sizes and background porosities. The effects of background porosity are incorporated into the governing equation. The ratio of the background leakage area $A_L$ to dominant opening area $A_W$ is presented in a non-dimensional format through a parameter, ${\phi}_6-A_L/A_W$. Background porosity was found to attenuate the internal pressure fluctuations when ${\phi}_6$ is larger than 0.2. The dominant opening discharge coefficient, ${\kappa}$ was estimated to lie between 0.05 to 0.40 and the effective background porosity discharge coefficient ${\kappa}^{\prime}_L$, was estimated to be between 0.05 to 0.50.

• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.3-11
• /
• 2008

현재 국내에서 건설되고 있는 대부분의 아파트는 철근콘크리트 전단벽과 바닥슬래브만으로 구성된 순수벽식구조 형태를 이용하고 있다. 이러한 벽식 구조 아파트에 대한 리모델링시 개구부 설치는 필연적이며 개구부 설치치 벽체의 거동은 매우 복잡하며, 연결부재인 보와 슬래브 같은 부재에 많은 영향을 받는다. 본 연구에서는 개구부가 있는 전단벽에 대해 횡하중 실험을 실시하였다. 실험체는 1980년대에 지어진 벽식 구조아파트를 대상으로 1/2축소 실험체를 제작하였다. 개구부의 면적 및 연결 슬래브의 위험단면은 기존 연구를 참고하여 결정하였다. 실험 결과 개구부 설치에 따른 내력 감소가 나타났으며, 연결 슬래브의 응력은 전단면에 대하여 균일하게 작용하지 않았다. 전단벽체와 커플링 작용을 하는 슬래브의 유효폭 및 위험단면은 기존 연구와 비교하여 큰 차이점을 나타냈으며, 국내의 아파트에 적용하기에는 다소 과소평가되고 있는 것으로 나타났다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.256-263
• /
• 2011

Recently, curtain wall structure is constructed according to increasing high rise building. Glass is usually used in opening of curtain wall structure and window area ratio is finally increased. Excessive Daylighting and solar radiation by large window area ratio cause discomfort glare and add to cooling load in the case of office that is heavy on lighting and cooling. Therefore, this study suggests to use low transmittance window for solve those problems. Indoor lighting environment and building energy performance were analyzed by increasing transmittance from 10% to 90% and comparing fixed venetian blind. Consequently, the range of transmittance that is possible to daylighting and prevent discomfort glare. Secondary energy consumption is efficient in the case that transmittance is the range of from 20% to 50%, primary energy consumption is nice on from 20% to 40%. If those result put together, the range of window transmittance from 30% to 50% is proper in the office in lighting environment and energy consumption aspects.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.687-708
• /
• 2020

Openings in steel plate shear walls (SPSWs) are usually used for decorative designs, crossing locations of multiple utilities and/or structural objectives. However, earlier studies showed that generating an opening in an SPSW has a negative effect on the cyclic performance of the SPSW. Therefore, this study proposes tripling or doubling the steel-sheet-plate (SSP) layer and stiffening the opening of the SPSW to provide a solution to undesirable opening effects, improve the SPSW performance and provide the infill option of potential strengthening measures after the construction stage. The study aims to investigate the impact of SSP doubling with a stiffened opening on the cyclic behaviour, expand the essential data required by structural designers and quantify the SPSW performance factors. Validated numerical models were adopted to identify the influence of the chosen parameters on the cyclic capacity, energy dissipation, ductility, seismic performance factors (SPF) and stiffness of the suggested method. A finite Element (FE) analysis was performed via Abaqus/CAE software on half-scale single-story models of SPSWs exposed to cyclic loading. The key parameters included the number of SSP layers, the opening size ratios corresponding to the net width of the SSP, and the opening shape. The findings showed that the proposed assembly method found a negligible influence in the shear capacity with opening sizes of 10, 15, 20%. However, a deterioration in the wall strength was observed for openings with sizes of 25% and 30%. The circular opening is preferable compared with the square opening. Moreover, for all the models, the average value of the obtained ductility did not show substantial changes and the ultimate shear resistance was achieved after reaching a drift ratio of 4.36%. Additionally, the equivalent sectional area of the SSP in the twin and triple configuration of the SPSWs demonstrated approximately similar results. Compared with the single SSP layer, the proposed configuration of the twin SSP layer with a stiffened opening suggest to more sufficiency create SSP openings in the SPSW compared to that of other configurations. Finally, a tabular SPF quantification is exhibited for SPSWs with openings.

• KIEAE Journal
• /
• 제8권5호
• /
• pp.43-48
• /
• 2008

This study is about offering quantitatively analytic frame of streetscape, and also about making a way to be standardized and adapt changing landscape. This allows us to manage a form of elevation map after the application to GIS. The form of elevation map is a visible and vertical arrangement method of data recognizable while walking or driving. Applying measurable traits enables us to make a quantitative control over each element of which streetscape consists. After all, it would play a great roll in organizing and maintaining fine streetscape of each city. As the basic ways to make the elevation map, this study proposes the methods of providing quantitative analytic frame of streetscape after applying elevation data, Raster Data and Vector Data, which were investigated on the basis of GIS. In addition, as a simulation for increasing reality, certain streets, where the streetscape is very important, were chosen so that they enable us to utilize quantitatively analytic data of streetscape with analyzing the +degree of opening ratio in the boundary of D/H=2, comparing between wall area and windowpane area, comparing between facade area and sign board area, and calculating both area and ratio which are applied to ecospace.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1081-1086
• /
• 2006

Curtainwall systems has been applied to buildings widely for constructability. However, as cutainwall system include many building materials, they become to damaged vapor barrier and incur condensation. Natural ventilation of an air cavity in a curtainwall is expected to be an prevention of condensation in inner wall and reduce cooling energy in summer. The objective of this experimental study is to evaluating the insulation and condensation Performance of ventilated curtainwall with ventilated cavity depth and ratio of opening area.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1139-1148
• /
• 1997

Compression waves propagating in a high-speed railway tunnel develops large pressure fluctuations on the train body or tunnel structures. The pressure fluctuations would cause an ear discomfort for the passengers and increase the aerodynamic resistance of trains. As a fundamental research to resolve the pressure wave phenomenon in the tunnel, experiments were carried out by using a shock tube with an open end. A blockage to model trains inside the tunnel was installed on the lower wall of shock tube, thus forming a sudden cross-sectional area reduction. The compression waves were obtained by the fast opening gate valve instead of a conventional diaphragm of shock tube and measured by the flush mounted pressure transducers with a high sensitivity. The experimental results were compared with the previous theoretical analyses. The results show that the ratio of the reflected to the incident compression wave at the sudden cross-sectional area reduction increases but the ratio of the passing to the incident compression wave decreases, as the incident compression wave becomes stronger. This experimental results are in good agreements with the previous theoretical ones. The maximum pressure gradient of the compression wave abruptly increases but the width of the wave front does not vary, as it passes over the sudden cross-sectional area reduction.