• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.5
• /
• pp.890-909
• /
• 2022

This study explores the types of clothing imported from Japan during the port-opening era and investigates the characteristics of import trade related to these clothing products. This is a literature study based on trade statistics data and books on Western clothing published in Japan during the Meiji period. Research findings are as follows: clothing products imported from Japan were divided into 6 types: 1) clothing, 2) undergarments, 3) shirts, 4) waterproof coats, 5) European-style clothing, and 6) nightgowns. "Clothing" is a unified name for any kind of garment, appearing in import records only from 1877 to 1884. Undergarments and shirts were imported from 1884. Waterproof coats were imported only in 1886 and 1898. European-style clothing and nightgowns were imported from 1902. In the total import of clothes, the proportion of clothing was the highest (48.0%), followed by undergarments (41.3%) and shirts (10.6%), while the ratio of nightgowns and raincoats was almost 0%. During the port-opening period, the change in the import value of clothes did not show a continuous increase, but rather showed a large stepwise increase over the course of several years.

• Korean Institute of Interior Design Journal
• /
• v.16 no.5
• /
• pp.63-70
• /
• 2007

A relationship between the museum display wall composition and the visual spatial configuration is investigated in this study. From the previous research, existing types are classified in order to define the exhibition space of room to room. Based on the classification, an open room to room of art museum is defined as a room to room of museum, and the plane of museums is investigated. With the museums under this study, the wall of a room to room exhibition space as well as the visual spatial configuration are analyzed depending on the location of an opening, centering on the composition of unit space. In addition, two types of spatial composition are compared depending on the location of the opening. One type of spatial composition is lied on a straight line with visual continuity, and the visual line is found to be simple. Whereas, the other type has an invisible configuration between spaces due to a criss-crossed opening, so the space is perceived to be closed and disconnected. When comparing these two types, the advantage and disadvantage of each space are compared. As a result, a similar type and size of unit space are derived. In addition, the ratio of the opening compared to the total wall was found to be uniform, and a distribution of the opening and walls were found.

• Journal of Fashion Business
• /
• v.24 no.1
• /
• pp.60-74
• /
• 2020

A Podaegi is a square cloth used to carry a baby. Podaegi was an essential necessity for raising baby. However currently Koreans prefer baby-carriers, baby hip-seats, and equipments other than Podaegi. Recently, Podaegi is becoming popular around the world. Therefore, it is necessary to study Podaegi to inform Korea's traditional parenting culture product. In this research, 230 images of Podaegi were collected from paintings, photographs, postcards, films and artifacts from the late 18th century to 2000. The period of study was divided into three phases from the late Joseon Dynasty to before the opening of the port, from the opening of the port to before the liberation, and from the liberation to 2000. Types of Podaegi were categorized according to its shape and how to use. Transition process of Podaegi was examined. Podaegis were categorized into band type, blanket type, combination type, cheone type, modern type, and so on. From the late Joseon Dynasty to before the pre-openings, band type was used. From the opening of the port to liberation, all types of Podaegi appeared. Since the liberation, the use of band and blanket type has gradually decreased. Modern types have been the most popular since the 1960s. Materials of Podaegi became varied and Podaegi became a fashion-item. Later, modern Podaegi became the representative form of Korean traditional Podaegi.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.206-209
• /
• 2001

One of the approaches to obtain functional polymer is polymerization of a monomer having two functional groups. Although polymerization of a monomer having two different types of functional group is general, the author has been interested in the polymerization of a monomer having two similar types of functional group. This work shows the preparation and selective polymerization of 4-methylene-2-styryl-1,3-dioxolane having two similar reactive double bonds via cationic polymerization at ambient temperature. Cationic ring-opening polymerization of 4-methylene-2-styryl-1,3-dioxolane using benzylsulfonium salt as a photo-initiator quantitatively afforded high molecular weight of poly(keto-ether).

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.399-408
• /
• 2015

This paper concentrated on the ultimate uniaxial compressive strength of stiffened panel with opening under lateral load and also studied the design-oriented formulae. For this purpose, three series of well executed experiments on longitudinal stiffened panel with rectangular opening subjected to the combined load have been selected as test models. The finite element analysis package, ABAQUS, is used for simulation with considering the large elasticplastic deflection behavior of stiffened panels. The feasibility of the numerical procedure is verified by a good agreement of experimental results and numerical results. More cases studies are executed employing nonlinear finite element method to analyze the influence of design variables on the ultimate strength of stiffened panel with opening under combined pressure. Based on data, two design formulae corresponding to different opening types are fitted, and accuracy of them is illustrated to demonstrate that they could be applied to basic design of practical engineering structure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.141-149
• /
• 2002

Most of mechanical failures are caused by repeated loadings and therefore they are strongly related to fatigue. To avoid the failures caused by fatigue, determination of an optimal shape of a structure is one of the very important factors in the initial design stage. Shape optimization for three types of specimens, which are very typical ones in opening mode in fracture mechanics, was accomplished by the linear elastic fracture mechanics and the growth-strain method in this study. The linear elastic fracture mechanics was used to estimate stress intensity factors and fatigue lives. And the growth-strain method was used to optimize the shape of the initial shape of the specimens. From the results of the shape optimization, it was concluded that shapes of three types of specimens optimized by the growth-strain method prolong their fatigue lives very much.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.699-701
• /
• 2003

This paper compare the Townsend theory with the Molten metal bridge theory of Holm for the arc discharge at opening contacts. And we measured the arc voltage at opening contacts of the 3 types arc extinction unit used in DC magnetic contactor. So, we sure that the molten metal bridge contributes to form the arc. By the experiment of the 3 types arc extinction unit, we know that the magnetic force acting on the arc doesn't effect forming arc but contribut the arc extinction.

• Earthquakes and Structures
• /
• v.16 no.3
• /
• pp.253-263
• /
• 2019

The efficacy of a galvanized steel wire mesh (GSWM) as an alternative material for the rehabilitation of RC beam-column connections damaged due to reversed cyclic loading was investigated. The repair mainly uses epoxy resin infused under pressure into the damaged zone and then confined using three types of locally available GSWM mesh. The mesh types used herein are (a) Weave type square mesh with 2mm grid opening (GWSM-1) (b) Twisted wire mesh with hexagonal opening of 15 mm (GSWM-2) and (c) welded wire mesh with square opening of 25 mm (GSWM-3). A reduced scale RC beam-column connection detailed as per ductile detailing codes of Indian Standard was considered for the experimental investigation. The rehabilitated specimens were also subjected to similar cyclic displacement. Important parameters related to seismic capacity such as strength, stiffness degradation, energy dissipation, and ductility were evaluated. The rehabilitated connections exhibited equal or better performance and hence the adopted rehabilitation strategies could be considered as satisfactory. Confinement of damaged region using GSWM-1 significantly enhanced the seismic capacity of the connections.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.04a
• /
• pp.57-60
• /
• 1990

The purpose of this report is to study the traffic opening day of concrete pavement. For this purpose this paper studies on the propeties of various cement types which include the newly developed cement for the cement pavement regarding the resistance to the chemical attack caused by de-icing salt and the durability of the concrete pavement. Especially, traffic opening day of concrete pavement are discussed on site.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.9
• /
• pp.679-684
• /
• 2012

This paper aims to evaluate performances of ventilation and insulation of 6types PVS(Passive ventilation skin) by numerical simulation. The results are as follows. 1) The result of Performance of ventilation by pressure difference, it was shown that the amount of ventilation changed bigger under 1Pa and amount of ventilation increased according to increase opening area (${\alpha}A$). Although same opening area of PVS, it can predict that pressure differences cause ventilation differences. 2) In case of same opening area of PVS, however, it was changed the amount of ventilation each types of PVS that is distinguished opening area by flow coefficient. 3) Dynamic U-value that represents performance of insulation PVS was similar change upper ${\alpha}A40\;cm^2/m^2$, great change in casse of 0.1 Pa pressure difference. In case of ${\alpha}A10\;cm^2/m^2$, it was changed bigger under 0.3 Pa pressure difference, ${\alpha}A20\;cm^2/m^2$ of PVS was changed under 0.2 Pa pressure difference.