DOI QR코드

DOI QR Code

Ultimate uniaxial compressive strength of stiffened panel with opening under lateral pressure

  • Yu, Chang-Li (School of Naval Architecture, Harbin Institute of Technology) ;
  • Feng, Ji-Cai (Post-Doctoral Station of Materials Science and Engineering, Harbin Institute of Technology) ;
  • Chen, Ke (China Shipping Container Lines Co., Ltd.)
  • Published : 2015.03.31

Abstract

This paper concentrated on the ultimate uniaxial compressive strength of stiffened panel with opening under lateral load and also studied the design-oriented formulae. For this purpose, three series of well executed experiments on longitudinal stiffened panel with rectangular opening subjected to the combined load have been selected as test models. The finite element analysis package, ABAQUS, is used for simulation with considering the large elasticplastic deflection behavior of stiffened panels. The feasibility of the numerical procedure is verified by a good agreement of experimental results and numerical results. More cases studies are executed employing nonlinear finite element method to analyze the influence of design variables on the ultimate strength of stiffened panel with opening under combined pressure. Based on data, two design formulae corresponding to different opening types are fitted, and accuracy of them is illustrated to demonstrate that they could be applied to basic design of practical engineering structure.

Keywords

References

  1. Bambach, M.R.BE and Rasmussen, K.J.R.MS., 2002. Tests of unstiffened elements under combined compression and bending. Research Report No R818 of the University of Sydney. Sydney: University of Sydney.
  2. Guedes, S.C. and Gordo, J.M. 1996. Collapse strength of rectangular plates under transverse compression. Journal of constructional steel research, 36(3), pp.216-234.
  3. IACS, 2008. Common structure rules for double hull oil tankers, July. [online] Available at: [Accessed 30 January 15].
  4. Jwalamalini, R., Sundaravadivelu, R., Vendhan, C.P. and Ganapathy, C., 1992. Stability of initially stressed square plates with square openings. Marine Structures, 5(1), pp.71-84. https://doi.org/10.1016/0951-8339(92)90034-M
  5. Khaled, M.El.S., Aly, S.N. and Mohammad, I., 2004. Elasto-plastic buckling of perforated plates under uniaxial compression. Thin-Walled Structures, 42(8), pp.1083-1101. https://doi.org/10.1016/j.tws.2004.03.002
  6. Madasamy, C.M. and Kalyanaraman, V., 1994. Analysis of plated structures with rectangular cutouts and internal supports using the spline finite strip method. Computers and Structures, 52(2), pp.277-286. https://doi.org/10.1016/0045-7949(94)90280-1
  7. Mohtaram, Y.F., Kahnamouei, J.T., Shariati, M. and Behjat, B., 2011. Experimental and numerical investigation of buckling in rectangular steel plates with groove-shape cut out. Journal of Zhejiang University, 13(1), pp.1-14.
  8. Narayanan, R. and Chan, S.L., 1985. Ultimate capacity of plates containing holes under linearly varying edge displacements. Computers and Structures, 21(4), pp.841-849. https://doi.org/10.1016/0045-7949(85)90160-9
  9. Paik, J.K., Thayamballi, A.K. and Kim, B.J., 2001. Advanced ultimate strength formulations for ship plating under combined biaxial compression/tension, edge shear, and lateral pressure loads. Marine Technology, 38(1), pp.153-164.
  10. Roberts, T.M. and Azizian, Z.G., 1984. Strength of perforated plates subjected to in-plane loading. Thin-Walled Structures, 2(2), pp.153-164. https://doi.org/10.1016/0263-8231(84)90009-0
  11. Suneel, K.M., Alagusundaramoorthy, P. and Sundaravadivelu, R., 2007. Ultimate strength of square plate with rectangular opening under axial compression. Journal of Naval Architecture and Marine Engineering, 4(7), pp.15-26.
  12. Suneel, K.M., Alagusundaramoorthy, P. and Sundaravadivelu, R., 2009. Interaction curves for stiffened panel with circular opening under axial and lateral loads. Ships and Offshore Structure, 4(2), pp.133-143. https://doi.org/10.1080/17445300902746420
  13. Yu, C.L. and Lee J.S., 2012. Ultimate strength of simply supported plate with opening under uniaxial compression. International Journal of Naval Architecture and Ocean Engineering, 4(4), pp.423-436. https://doi.org/10.3744/JNAOE.2012.4.4.423

Cited by

  1. Effect of Reinforced Cutouts and Ply-Orientations on Buckling Behavior of Composite Panels Subjected to Non-Uniform Edge Loads vol.18, pp.4, 2015, https://doi.org/10.1142/s021945541850058x
  2. Improved design formulas for the ultimate strength of platings with circular openings and manholes under uniaxial compression vol.75, pp.None, 2015, https://doi.org/10.1016/j.marstruc.2020.102847