• Journal of Surface Science and Engineering
• /
• v.50 no.3
• /
• pp.198-205
• /
• 2017

Thermal dissipation was investigated for poly methyl methacrylate (PMMA) composite films containing graphite and multi wall carbon nanotube(CNT) powders as filler materials. After mixing PMMA with fillers, solvent, and dispersant, the pastes were prepared by passing through a three roll mill for three times. The prepared pastes were coated $15{\sim}40{\mu}m$ thick on a side of 0.4 mm thick aluminium alloy plate and dried for 30 min at $150^{\circ}C$ in an oven. The content of fillers in dried films was varied as 1, 2, and 5 weight % maintaining the ratio of graphite and CNT as 1:1. Raman spectra from three different samples exhibited D, G and 2D peaks, as commonly observed in graphite and multi wall CNT. Among those peaks, D peak was prominent, which manifested the presence of defects in carbon materials. Thermal emissivity values of three samples were measured as 0.916, 0.934, and 0.930 with increasing filler content, which were the highest ever reported for the similar composite films. The thermal conductivities of three films were measured as 0.461, 0.523, and $0.852W/m{\cdot}K$, respectively. After placing bare Al plate and film coated samples over an opening of a polystyrene box maintained for 1 h at $92^{\circ}C$, the temperatures inside and outside of the box were measured. Outside temperatures were lower by $5.4^{\circ}C$ in the case of film coated plates than the bare one, and inside temperatures of the former were lower by $3.6^{\circ}C$ than the latter. It can be interpreted that the PMMA composite film coated Al plates dissipate heat quicker than the bare Al plate.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.505-518
• /
• 2003

A survey has been administered to investigate the adequacy of the chemistry teacher employment examination. The questionnaires were sent to the professors of the fourteen departments of chemistry education all over the nation and the responses were collected from the thirteen departments. From the analyses of the responses, the problems were pointed out and the suggestions were made for the improvement of the examination to recruit excellent chemistry teachers. Reconsideration of the ratio of subject matter education to subject contents, adjustment of format and number of questions, maintaining of proper degree of difficulty and discrimination of items, reconsideration of relevancy to practical education, raising the number of committee for the examination, the reflection of the 7th science curriculum, and opening to the public of the information related to the teacher employment examination were discussed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.179-190
• /
• 2001

In this proposed study, observing and analyzing contrast enhanced abdominal CT images, we segmented the liver automatically. We computed the ratio of each gray value from the estimated gray value range. With the average value of mesh image, we distinguished the liver from the noise parts. We divided the region based on immersion simulation. The threshold value is determined from the mesh image which is generated from each gray value portion of the liver and is used in dividing the liver to the noise region. To get the outline of the liver, we generated template image which represents the lump of the liver, and subtracted it from the binary image. With the results we use the proposed algorithm using 8-connectivity instead of the present opening algorithm, to reduce the processing time. We computed the volume from the segmented organ size and presented a clinical demonstration with the animal experiment

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.627-634
• /
• 2004

The purpose of this study is to investigate seismic performance of a bearing wall system for apartment buildings. An 1/3 scale three-story specimen was constructed and tested under cyclic lateral loads. The specimen was consisted of pierced walls and coupling elements as well as floor slabs. The bearing wall system is considered to have a adequate deformation capacity up to $2.0\%$ of roof drift ratio, and the experimental results showed the ductile load-deformation characteristics even though some walls were failed in shear Nonlinear analysis was peformed to compare the load-deformation curve obtained from the experimental program. The result of nonlinear analysis could be useful to predict the actual behavior characteristics of the bearing wall system subjected to lateral loads.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.57-66
• /
• 1989

66 patients with temporomandibular disorders were selected for experimental group, and 45 normal subjects who were Dental students were selected for control group. Average age of experimental group was 30.5 years, Male to Female ratio was 2 : 3, and their age distribution were teen-ages to seventh decades. Transcranial radiography (TR) with Denar Accurad 100 was used for each group to get the values of width in joint spaces and to investigate the bony changes of articular surfaces and relative condylar position to articular fossa. In addition to TR, clinical interview and routine charting about amount of mandibular movements and occlusal variations were carried out in experimental group. The obtained results were as follows : 1. The mean values of joint space with in control group were 2.15mm to anterior, 2.98mm to superior and 2.29mm to posterior and the value of relative condylar position to the deepest portion of articular fossa was 0.21mm to anterior. In experimental group, those values were 2.01mm, 2.14mm 2.22mm and 0.12mm to posterior in sequence, respectively. Joint spaces in experimental group, therefore, were inclined to decreased, and relative condylar position was inclined to retrude. Joint space in control group showed symmetric condylar position, but in experimental group showed asymmetry. 2. Non-affected joints with no bony changes in experimental group showed the narrowest joint spaces which were thought to manifest the abnormal stress to non-affected side to dysfunctional state of contralateral affected joints. 3. Amount of mandibular movements in experimental group were within normal values in lateral movements and in protrusive movement but in opening movement with or without passive stretch, those were lower than normal values. Frequency of occlusal variation, for example, protrusive posterior contacts, open bite, median line shift to lateral side were inclined to increase with bony changes and with crepitus.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.2
• /
• pp.97-113
• /
• 2001

At the opening of a new millennium and a new century, health promotion and education services in Korea are in the early developmental stage. The National Health Promotion Act legislated in 1995 was a milestone for initiating a national and local health promotion program in Korea. And since then local governments and health centers have been developing and providing health promotion program for the community populations. The short history of health promotion and education in Korea has meant that local governments and health centers have a limited experience and organizational capacity for health promotion and education planing and practice. This study was attempted to measure health education need of rural community and to analyze the factors for health education need assessment. Surveyors interviewed 1250 subjects randomly selected. Subjects were 2.17% of men and women in Changnyung county and older then 20 years old. Data were collected from April 17, 2000 through April 27, 2000. The questionnaire consisted of general characteristics, health educational experiences, health educational method, health educational content and health educational needs for rural community residents. The questions on the health educational needs of content consist of 36 questions in 8 fields. The statistical methods used for the analysis were $X^2$-test, t-test, F-ratio and ANOVA using SPSS program. In conclusion, despite more needs to the respondents who are in the low education level and socioeconomic state, in the old age, in the low health knowledge, they required less health education. To enjoy a more healthy life after more community residents actively understand and are interested in health education and health promotion, we certainly require a designed and systemic health education. The resources of health department in Korea are limited and the investment involved in health promotion and health education is severely reduced. Particularly this situation is more severe in the rural community. To select and perform an effective health education methods that the nature and reality of the rural community are considered, well use the resources to invest in health promotion affairs as effectively as possible and then they will take the responsibility of healthy community.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.123-129
• /
• 2008

The purpose of this study is to test performances of 14 types of root barrier materials by applying testing plant: and soils suitable for weather and natural features of Korea. For testing Plants, Plioblastus pygmaed Mitford A and Pyracantha angustifolia have been selected. For testing soil, mixture of pearlite and peat moss in 3:1 ratio Testing container has been fabricated with duplicated structure having inner and outer containers. And the outer container has 2 hinges on its side wall to allow opening and closing. Wet rock wool with 50mm in thickness has been inserted between inner and outer containers to allow root to penetrate through root barrier material and continue to grow. We planted 12 Plioblastus pygmaed Mitford A. and 4 Pyracantha angustifolia per one testing container. Three testing samples have been made for 1 type of root barrier material, which become a total 42 specimens. Planted testing samples have been installed within the greenhouse, which will be observed regularly for 2 years from now on. We started test from July 11, 2008 and had performed intermediate observations every month for initial 3 months. From the 3rd intermediate observation on Sept. 18, we confirmed that 6 types of roe barrier materials have penetrated roots. Even though two types of them have been generally used as root barrier materials for roof planting system, all of three testing samples have a lot of penetrated roots. This result proves that it is not reasonable to introduce testing methods of root barrier from Europe. USA or Japan.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.43-53
• /
• 2010

Seismic isolation is one of the most widely implemented and accepted seismic protection systems to limit or avoid damages from unforeseeable earthquakes. As an energy absorption device, however, the supplemental lead itself tends to pollute the environment. Consequently, it is predicted that the use of lead would be controlled. Considering the pollution caused by lead, several researchers are interested in the viability of using steel in place of lead. In this study, first, based on the results of a non-linear finite element analysis, the excellent deformation capacity of a very tough steel damper was demonstrated by comparing it with that of the SS400 damper and determining the effects of main parameters (the aspect ratio, thickness, and width) on the deformation capacity. Second, an optimum shape and design equation for a U-shaped damper with an opening based on stress distribution was suggested.

• Korean Journal of Materials Research
• /
• v.26 no.8
• /
• pp.430-437
• /
• 2016

Aluminum oxide ($Al_2O_3$) thin films were grown by atomic layer deposition (ALD) using a new Al metalorganic precursor, dimethyl aluminum sec-butoxide ($C_{12}H_{30}Al_2O_2$), and water vapor ($H_2O$) as the reactant at deposition temperatures ranging from 150 to $300^{\circ}C$. The ALD process showed typical self-limited film growth with precursor and reactant pulsing time at $250^{\circ}C$; the growth rate was 0.095 nm/cycle, with no incubation cycle. This is relatively lower and more controllable than the growth rate in the typical $ALD-Al_2O_3$ process, which uses trimethyl aluminum (TMA) and shows a growth rate of 0.11 nm/cycle. The as-deposited $ALD-Al_2O_3$ film was amorphous; X-ray diffraction and transmission electron microscopy confirmed that its amorphous state was maintained even after annealing at $1000^{\circ}C$. The refractive index of the $ALD-Al_2O_3$ films ranged from 1.45 to 1.67; these values were dependent on the deposition temperature. X-ray photoelectron spectroscopy showed that the $ALD-Al_2O_3$ films deposited at $250^{\circ}C$ were stoichiometric, with no carbon impurity. The step coverage of the $ALD-Al_2O_3$ film was perfect, at approximately 100%, at the dual trench structure, with an aspect ratio of approximately 6.3 (top opening size of 40 nm). With capacitance-voltage measurements of the $Al/ALD-Al_2O_3/p-Si$ structure, the dielectric constant of the $ALD-Al_2O_3$ films deposited at $250^{\circ}C$ was determined to be ~8.1, with a leakage current density on the order of $10^{-8}A/cm^2$ at 1 V.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.64-71
• /
• 2004

This paper describes the result of the pump room fire analysis of the nuclear power plant using CFAST fire modeling code developed by NIST. The sensitivity studies are performed over the input parameters of CFAST: the constrained or unconstrained fire, Lower Oxygen Limit (LOL), Radiative Fraction (RF), and the opening ratio of the fire doors. According to the results, a pump room fire is the ventilation-controlled fire, so it is adequate that the value of LOL is 10% which is also the default value. It is anlayzed that the Radiative Fraction does not affect the temperature of the upper gas layer. It is appeared that the integrity of the cable located at the upper layer is maintained except for the safety pump at the fire area and the Conditional Core Damage Probability (CCDP) is 9.25E-07. It seems that CCDP result is more realistic and less uncertain than that of Fire Hazard Analysis (FHA).