• 상하수도학회지
• /
• 제29권5호
• /
• pp.559-564
• /
• 2015

Distribution basins are used widely in the water treatment process. Uniform distribution at the distribution basin is an important because it affect precipitation efficiency of sedimentation basin. Generally distribution basin has a free surface water and is consisted of a weir. Study result, when inflow of distribution basin is less, amount of overflow is much at the nearest weir from the inlet. But when inflow is much, amount of overflow is much at the far weir from the inlet. The difference of distribution amount at the pipe is affected by the curvature and length of the pipe. The magnitude of the effect is determined by the relative energy loss and the flow state of the distribution basin. Optimization of the response surface method for minimizing an amount of deviation of the distribution is a very useful technique to determine the optimal ratio of the valve opening.

• Nuclear Engineering and Technology
• /
• 제17권4호
• /
• pp.302-316
• /
• 1985

TMI와 월성 사고 이후 PORV를 통한 Small LOCA는 원자력 발전소 리스크의 중요한 요소로 부각되었다. 본 논문에서는 이 계통을 통한 Pressurizer Surveillance System의 설제와 그에 따른 영향을 확률론적 리스크 평가(PBA) 방법으로 해석하였다. 마이크로 컴퓨터는 계통의 고장(Malfunction)을 공정 확인 방법(Process Checking Method)으로 진단하고 그 진단에 따른 후속 동작(Backup Action)을 자동으로 수행한다. 이러한 개선에 따라 운전원의 빠르고 정확한 판단이 어려웠던 “Spurious Opening”, “Fail to Reclose” 및 “Small Break LOCA” 등의 진상(Symptom) 이 정확히 진단되고, 후속 동작의 자동화로 인하여 인간 실수 확률이 기계적 실수 확률로 감소하게 되었다. 결국. 이러한 개선은 계통의 신뢰도 증가로 Small LOCA 확률의 감소를 가져다 준다.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.24-32
• /
• 2021

The size of container ships is increasing to increase the cargo loading capacity. However, container ships are limited in terms of the hull longitudinal strength. To overcome this limitation, brittle crack arrest steel can be used. This study was aimed at examining the influence of the heat input on the welding procedures of flux cored arc welding and submerged arc welding. In the experiment, the crack tip opening displacement test, which pertains to a parameter of fracture mechanics, was performed, and a 3-point bending tester was adopted. Based on the results, the crack measurement method was presented, and the stress expansion coefficient value for the pre-fatigue crack length was derived according to the heat input after the pre-cracking length was measured. It was noted that the heat input affected the crack tip opening displacement of brittle crack arrest steel.

• 한국전산구조공학회논문집
• /
• 제33권4호
• /
• pp.217-224
• /
• 2020

본 논문에서는 초고층 건물의 철근콘크리트 아웃리거 벽체 개구부의 최적설계를 위한 수학적 최적화 프레임워크를 제시하였다. 전용 유한요소해석 프로그램을 이용하여 아웃리거 벽체를 해석하였으며 깊은 보의 스트럿-타이 거동을 고려하여 개구부를 배치하였다. 최적화를 위해 파이썬 SciPy 라이브러리 중 순차이차계획법(Sequential Quadratic Programming)을 이용하여 제약 경계 최적화를 수행하였다. 최적화에 필요한 미분가능한 연속 함수를 얻어내기 위해 선형 보간법을 사용하였으며, 최적화 프로그램의 효율성을 위해 데이터베이스를 이용하였다. 2변수 최적화의 결과를 탐색 알고리즘의 이동 경로를 통해 살펴본 결과 알고리즘이 최적화된 결과를 효율적으로 찾아냄을 확인하였다. 그리고 개구부의 폭을 모두 같게 설정한 것이 아닌 각각의 개구부의 크기를 개별 변수로 설정하였을 경우 목적함수의 값이 최소화되어 더 우수한 최적화 결과를 도출함을 확인하였다. 또한, 최적화의 과정에 있어 데이터베이스를 이용할 경우 최적화 시간을 효과적으로 단축시킬 수 있음을 확인하였다.

• 한국문헌정보학회지
• /
• 제23권
• /
• pp.63-106
• /
• 1992

The opening period of Korea was the period of modernisation amidst the conflicts between conservative and progressive sections with penetration of Western powers after 1876. With the opening modernisation accompanied modernisation of education. Missionary schools established by protestant missionaries played a crucial role in educational modernisation in the period of opening. In this article, the process of educational modernisation and the ways in which the ideas of democracy and equality were taught in the earliest schools, Paejae, Ewha, Kyoungsin and Chungsin are analysed through the method of bibliographical investigation of the textbooks used by these schools. No textbook prior to 1900 was found and in general there were no textbooks such as we know today. Usually English reading material and the Bible were the main teaching materials. Teachers kept their own copies of hand-written texts which were translated versions of American textbook. Since the same teacher taught in a number of schools, they shared same curriculum. In the early period, English Bible was taught so that English and the Bible lessons were not separated but gradually history and geography were added. Teaching of Hangul, and Korean history were added to encourage the sense of national identity and patriotism. In the case of Chungsin, for biology class, pupils were sent to Che-jung-won to learn human physiology, chemistry and physics, which shows an emphasis on science education. Vocational education was carried out; in the case of Paejae, a printing workshop was set up enabling students to earn some money at the same time as learning. Also in Kyungsin, skills of woodwork and basket weaving were stressed. Ewha also held a bazaar of the work made in sewing classes. Establishment of missionary schools brought about a great contribution in modernising Korean society and the Christian spiritual education of these schools lay the foundation for building democracy in Korea.

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).

• 한국응급구조학회지
• /
• 제8권1호
• /
• pp.33-45
• /
• 2004

The study is designed to develop an educational CD-Title for Basic Life Support. The study is conducted from July to December, 2002, Based on the course of program development suggested by Dick and Cray. the study followed the planning, development, education and evaluation of a program. The developed CD-Title consists of 8 parts. 1. Intro include Introduction, Adult CPR, Child CPR, Infant CPR, Adult Foreign-Body Airway Obstruction, Infant Foreign-Body Airway Obstruction, and Exercise in Menu at Right of screen. 2. Introduction consist of death process at cardiac arresst, chain of survival, introduction of CPR, respiratory & ciculatory anatomy and physiology. 3. Adult CPR consist of assessment responsiveness, activating EMS system, position victim, opening a airway, checking for breathing, rescue breathing, checking for sign of circulation, chest compression, 1 person & 2 persion adult CPR video. 4. Child & Infant CPR consist of, causes, assessment responsiveness, position victim, opening the airway, checking for breathing, rescue breathing, checking for sign of circulation, chest compression, activating EMS system, child & infant CPR video. 5. Adult Foreign-Body Airway Obstruction include assessment responsiveness, activating EMS system, position victim, opening a airway, checking for breathing, 2 rescue breathing, reopening the airway, 2 rescue breathing, finger sweep, 5 abdominal thrusts, unresponsiveness adult Foreign-Body Airway Obstruction video. 6. Infant Foreign-Body Airway Obstruction consist of, causes, assessment responsiveness, position victim, opening the airway, checking for breathing, 2 rescue breathing, reopening the airway, 2 rescue breathing, checking foreign-body object in oral cavity of victim, 5 back blow, 5 chest thsusts, activating EMS system, video. 7. 32 exercise consist of 8 Adult CPR, 12 Child & Infant CPR, 5 Adult Foreign-Body Airway Obstruction, 7 Infant Foreign-Body Airway Obstruction. Every part consist of animations to trigger students interests. This CD-Title will be useful education for first responders and lay rescuers.

• 한국연초학회지
• /
• 제29권2호
• /
• pp.66-73
• /
• 2007

This study was carried out to investigate the changes of curing condition on microclimate of temperature, relative humidity during curing process of burley tobacco leaves. The developed facility, ridge opening type was designed to open the central top roof. The air-cured variety, (N. tabacum cv KB111) was normally grown at the Eumseong tobacco experimental station in 2007. Mean daily temperature of $3^{\circ}C$ in ridge opening type curing facility was lower than that of conventional, whereas mean daily relative humidity of 12.6 % RH was lower in conventional curing facility for the entire stage of curing. The frequency distribution of optimal air temperature at daytime was higher 37.5 % in ridge opening type curing facility than that of conventional, while that of optimal relative humidity was lower 8.2 %. In the ridge opening type curing facility, the excessive drying leaves were low, however the price per kilogram was high. These results suggest that the new developed curing facility may be applied to improved microclimate inside the curing facility for curing burley.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1465-1469
• /
• 2012

For given electrolytes, different behaviors of anodic aluminum oxide (AAO) and anodic titanium oxide (ATO) during electrochemical thinning are explained by ionic and electronic current modes. Branched structures are unavoidably created in AAO since the switch of ionic to electronic current is slow, whereas the barrier oxide in ATO is thinned without formation of the branched structures. In addition, pore opening can be possible in ATO if chemical etching is performed after the thinning process. The thinning was optimized for complete pore opening in ATO and potential-current behavior is interpreted in terms of ionic current-electronic current switching.

• Journal of applied mathematics & informatics
• /
• 제32권5_6호
• /
• pp.649-663
• /
• 2014

Presence of eyelid on anterior ocular surface and its thermal effects play significant role in maintaining eye temperature. In most of the literatures of thermal modeling in human eye, the eyelid is not considered as an eye component. In this paper, finite element model is developed to investigate the thermal effects of eyelid closure and opening in human eye. Based on different properties and parameter values reported in literatures, the bio-heat transfer process is simulated and compared with experimental results in steady and transient state cases. The sensitivity analysis using various ambient temperatures, evaporation rates, blood temperatures and lens thermal conductivities is carried out. The temperature values so obtained in open eye show a good agreement with past results. The closure of eyelid is found to increase/decrease the eye temperature significantly than its opening, when the parameter values are considered to be at extreme.