• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.117-123
• /
• 2014

써멀비아나 수직 배선으로 사용하기 위한 Cu 관통비아를 열린 비아 hole의 top-down filling 도금공정과 bottom-up filling 도금공정으로 형성 후 미세구조를 관찰하였다. 직류도금전류를 인가하면서 열린 비아 홀 내를 top-down filling 도금하거나 bottom-up filling 도금함으로써 내부기공이 없는 건전한 Cu 관통비아를 형성하는 것이 가능하였다. 열린 비아 홀의 top-down filling 공정에서는 Cu filling 도금 후 시편의 윗면과 밑면에서 과도금된 Cu 층을 제거하기 위한 chemical-mechanical polishing(CMP) 공정이 요구되는데 비해, 열린 비아 홀의 bottom-up filling 공정에서는 과도금된 Cu층을 제거하기 위한 CMP 공정이 시편 윗면에서만 요구되는 장점이 있었다.

• 한국전산구조공학회논문집
• /
• 제32권4호
• /
• pp.233-240
• /
• 2019

인장 강도는 복합 재료를 설계하기 위한 필수 변수이므로 개방 홀 인장 시험을 통해 복합 재료의 인장 강도를 측정한다. 그러나 인장 시험을 올바르게 모델링하는 것은 섬유와 매트릭스 손상, 층간분리 및 섬유와 매트릭스 사이의 손상 같은 다양한 손상을 수반하기 때문에 매우 어려운 과제다. 따라서 섬유와 매트릭스 사이의 면내 파괴 및 층간분리를 평가하기 위해 본 연구에서는 점진적 손상 모델을 개발하였다. 하신 손상 모델과 응집 영역 접근법을 층과 층간분리를 모델링하는데 사용하였다. 현재 모델의 결과를 이전에 발표된 실험 및 수치 결과와 비교하여 검증하였다. 이를 통해 유한요소해석에서 층간분리를 무시하면 인장 강도가 과대평가 된다는 것을 확인할 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.208-213
• /
• 2004

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in- pool type, is under normal operation since it reached the initial critical in February 1995. The HANARO is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading it in a circular flow tube (OR-5). A guide tube is extended from the reactor core to the top of the reactor chimney for easily un/loading a target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube by jet flow. This paper is described an analytical analysis to calculate the hole size of a orifice inserted in the circular irradiation hole and to study the flow characteristics through the guide tube under reactor normal operation and loading the target. As results, the results show that the hole size of orifice was 31 mm of the inner diameter to suppress the guide tube jet flow and the coolant safely cooled the target of fission moly after inserting the orifice to the flow tube.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.379-379
• /
• 2010

Recent technical advances in OLEDs (organic light emitting devices) requires more and more the improvement in low operation voltage, long lifetime, and high luminance efficiency. Inverted top emission OLEDs (ITOLED) appeared to overcome these problems. This evolved to operate better luminance efficiency from conventional OLEDs. First, it has large open area so to be brighter than conventional OLEDs. Also easy integration is possible with Si-based driving circuits for active matrix OLED. But, a proper buffer layer for carrier injection is needed in order to get a good performance. The buffer layer protects underlying organic materials against destructive particles during the electrode deposition and improves their charge transport efficiency by reducing the charge injection barrier. Hexaazatriphenylene-hexacarbonitrile (HAT-CN), a discoid organic molecule, has been used successfully in tandem OLEDs due to its high workfunction more than 6.1 eV. And it has the lowest unoccupied molecular orbital (LUMO) level near to Fermi level. So it plays like a strong electron acceptor. In this experiment, we measured energy level alignment and hole current density on inverted OLED structures for hole injection. The normal film structure of Al/NPB/ITO showed bad characteristics while the HAT-CN insertion between Al and NPB greatly improved hole current density. The behavior can be explained by charge generation at the HAT-CN/NPB interface and gap state formation at Al/HAT-CN interface, respectively. This result indicates that a proper organic buffer layer can be successfully utilized to enhance hole injection efficiency even with low work function Al anode.

• Composites Research
• /
• 제16권4호
• /
• pp.66-73
• /
• 2003

충격 시나 충격 후 압축 할 때 구조용 복합재의 거동에 대한 중요성은 충격 손상과 충격후압축강도 예측에 대한 해석적 모델을 개발하기 위해 간과될 수 없을 것이다. 본 연구는 3mm두께의 $[45/-45/0/90_{3s}$ - IM7/8552린복합재판들을 이용하여 준정적횡하중시험, 저속충격시험, 충격후압축강도시험 및 구멍이 있는 시편의 압축강도시험 등을 수행한 후 이로 부터 발견된 결과들을 제시하였다 준정적횡하중과 충격하중시험에서 발생한 손상면적들이 서로 유사하며. 또한 5.4 J 부터 18.7 J 까지의 다양한 에너지준위들을 가진 낙하충격 시험 곡선들과 정적시험 곡선들도 서로 유사하다는 결론을 얻었으며. 이때 주어진 에너지 준위에서 정적과 충격시의 최대하중 값들이 잘 일치한다는 사실을 확인 하였다. 충격 후 압축시험에 의한 시편들의 파괴거동이 압축하중하의 구멍이 있는 적층판에서 관찰된 파괴거동과 매우 유사하과는 사실도 확인 되었다. 충격손상 후 잔류강도는 충격손상 등가구멍이 있는 경우의 시편에서 측정된 압축 강도와 잘 일치 하였다. 이와 같은 실험적 연구 결과들은 충격손상면적과 충격후압축강도의 예측에 대한 단순만 해석모델들이 이들 시험결과들로부터 관찰된 파괴기구를 기초로 하여 개발될 수 있음을 제시하고 있다.

• 한국추진공학회지
• /
• 제5권1호
• /
• pp.42-48
• /
• 2001

지난 20년 동안 인장하중과 굽힘 하중 상태에서 복합재료 적층판의 크기효과에 관한 많은 연구가 수행되었으며, 시편의 크기를 증가함에 따라 복합재 적층판의 강도가 저하되는 경향은 잘 알려져 있다. 그러나, 복합재 압축시험의 어려움으로 인해 압축하중 상태에서 시편의 파괴강도에 대한 크기효과에 관한 연구는 거의 수행되지 않았다. 본 연구에서는 홀을 갖는 복합재의 압축 강도에 대한 크기 효과를 고찰하기 위해 T300/924C, $>[45/-45/0/90]_{3S}$를 사용하였으며, 시편의 크기 변화를 위해 2차원면적 변화(시편의 폭 및 길이 변화)를 고려하는 평면 스케일링 방법을 사용하였다. 실험 결과는 유한폭을 가지는 평판에 대한 명확한 홀 크기 효과를 보였을 뿐만 아니라, 같은 a/W(홀 직경/시편 폭)를 갖는 시편에서도 크기 효과를 확인할 수 있었다. 반면에, 홀이 없는 시편은 명확한 강도 크기 효과를 보이지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.311-312
• /
• 2010

The fabricated photovoltaic cells based on PIN heterojunctions, in this study, have a structure of ITO/poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)/donor/donor:C60(10nm)/C60(35nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline(8nm)/Al(100nm). The thicknesses of an active layer(donor:C60), an electron transport layer(C60), and hole/exciton blocking layer(BCP) were fixed in the organic photovoltaic cells. We investigated the performance characteristics of the PIN organic photovoltaic cells with copper phthalocyanine(CuPc), tetracene and pentacene as a hole transport layer. Discussion on the photovoltaic cells with CuPc, tetracene and pentacene as a hole transport layer is focussed on the dependency of the power conversion efficiency on the deposition rate and thickness of hole transport layer. The device performance characteristics are elucidated from open-circuit-voltage(Voc), short-circuit-current(Jsc), fill factor(FF), and power conversion efficiency($\eta$). As the deposition rate of donor is reduced, the power conversion efficiency is enhanced by increased short-circuit-current(Jsc). The CuPc-based PIN photovoltaic cell has the limited dependency of power conversion efficiency on the thickness of hole transport layer because of relatively short exciton diffusion length. The photovoltaic cell using tetracene as a hole transport layer, which has relatively long diffusion length, has low efficiency. The maximum power conversion efficiencies of CuPc, tetracene, and pentacene-based photovoltaic cells with optimized deposition rate and thickness of hole transport layer have been achieved to 1.63%, 1.33% and 2.15%, respectively. The photovoltaic cell using pentacene as a hole transport layer showed the highest efficiency because of dramatically enhanced Jsc due to long diffusion length and strong thickness dependence.

• 한국조리학회지
• /
• 제13권1호
• /
• pp.204-211
• /
• 2007

In order to develop a pot lid that would not overflow, three parts were created, each different in size. One cover (A") had a small hole (dia. 10 cm) for the vapor to escape (dia. about 2.5 mm). Another, cover A' had a medium-sized hole (dia. about 5 cm) for the vapor to escape. Cover A (dia. 300 mm, $120\;mm^H$) had a large hole (dia. 100 mm) for the vapor to escape. Because the new cover was partially open while soy paste solution cooking, it showed that it could not only prevent overflow, but also extend the burning approaching and salinity increase time, reducing both cooking time and the amount of energy necessary to cook.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.79-89
• /
• 2004

It is known that most people have a dominant eye, even though each of their two eyes in isolation may provide equal vision. In this study, 600 Korean male and female subjects aging from 11 to 78 were selected to investigate the various statistics about eye dominance( whether the left or right eye is dominant} in Korean and their employment characteristics of preferred eye in sighting diverse things. A simple sighting test was applied such that subjects are requested to aim a distance target through small hole in B4 sized paper with both eyes open. The dominant eye was determined by alternate occlusion: when viewing with the dominant eye into the hole is aligned with the target, whereas when viewing with the other eye into the hole appears offset to one side. The descriptive statistics showed that 83.7% and 16.3% were right and left eye dominant respectively. Moreover, various statistical analysis revealed that general tendency of eye dominance was varied by age, gender, hand dominance and visual acuity. It was thus found from these results that people sighting their eyes differently depending on the eye dominance when they sight things.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.