• Korean Journal of Environment and Ecology
• /
• v.6 no.2
• /
• pp.180-192
• /
• 1993

This study was conducted to investigate bird community and to suggest a proper way how to manage and protect bird community in Sobaeksan National Park. The survey was carried over 3 main trail districts by line transect method to figure out influence factor of inhabitation of wild birds from February to October in 1992. The study results as follows: The observed birds were belong to 9 orders l2 families 58 species, they also have Sparrow Hawk dccipiter nisus, Kestrel Faleo tinnunculus(natural monument no. 323). Scops Owl I'otus scops(natural monument no. :324), Black Woodpecker Dryoaepus martius(natural monument no. 242. R). White-backed Woodpecker Dendroaepos leuotes(R) and Gray-backed Thrush Turdus hortulorum(R). These birds a]so classified into 31 species for residents. 17 species for summer visitor, 6 species for winter visitor. 4 species for passage migrant, respectively. Species richness was 38 species at spry, 33 species at summer. 26 species at autumn and 22 species at winter. The density was 3.00 ea /ha at spring, 2.37 ea /ha at summer, 3.62 ea /ha at autumn and 2.88 ea /ha at winter. Breeding bird community in Sobaeksan National Park was dominated by Hole, Bush-nesting guild and Canopy-foraging guild. Natural vegetation of 900m altitude in 1st section and the grassy plain in 2nd section are to be protected absolutely for the habituation of wild birds. Species richness in 3rd section was higher than any other section owe to a various habitat such as valley. open lands, orchid, farm land and forest etc. Food plants and broad-leaved forest is to be managed for the provision of opulent food resources in autumn and winter, user is to be managed for the successful propagation of wild birds in spring and autumn.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2015

This review article summarizes the recent progress of quantum dot (QD)-sensitized solar cells based on mesoporous $TiO_2$ thin films. From the intrinsic characteristics of nanoscale inorganic QDs with various compositions, it was possible to construct a variety of 3rd-generation thin film solar cells by solution process. Depending on preparation methods, colloidal QD sensitizers are pre-prepared for later deposition onto the surface of $TiO_2$ or in-situ deposition of QDs from chemical bath is done for direct growth of QD sensitizers over substrates. Recently, colloidal QD sensitizers have shown an overall power conversion efficiency of ~7% by a very precise control of composition while a representative CdS/CdSe from chemical bath deposition have done ~5% with polysulfide electrolytes. In the near future, it is necessary to carry out systematic investigations for developing new hole-conducting materials and controlling interfaces within the cell, thus leading to an enhancement of both open-circuit voltage and fill factor while keeping the current high value of photocurrents from QDs towards more efficient and stable QD-sensitized solar cells.

• Journal of the Korean Home Economics Association
• /
• v.43 no.9 s.211
• /
• pp.143-162
• /
• 2005

Many ethnic groups have different cultural backgrounds and each culture has developed with its own traditions. The interaction between different cultures is getting more active through acculturation and cultural contact. The purpose of this study was to provide basic data about the domestic living of Australians in order to compare with Korean immigrants in the form of a Cross-Cultural study. For this, usage of domestic space and seating style of 53 Australian households in Melbourne were analyzed. Ethnographic research with questionnaire was used. The results of the research were as follows. 1. The open plan type combining the kitchen, dining and tying areas was the most popular one for Australians and they are very satisfied with that type. 2. The laundry room has been planned traditionally and Australians demand to be able to dry their laundry and do ironing in there additionally. Most of Australians were satisfied with separated toilet and bathroom. h drain hole on the floor of the bathroom was not essential for most Australians. 3. Australians were doing various activities in the living areas and they also enjoy gelling together in the kitchen and dining areas. 4. The seating style of Australians was generally the chair-seating style. However, they sometimes made a bed for guests on the floor and watched TV and treated guests with both chair seating style and floor seating style. 5. Australians were satisfied with using carpet presumably for its warmth.6. Many Australians took off their shoes inside of the house for hygienic reason. Most people organized the shoes in the cabinet of the bedroom. 7. The most popular heating system was ducted heating for Australians and they were very satisfied with it because it was suitable for the weather in Melbourne. 8. The living room was the most important one for Australian families and they thought that it should be decorated well for entertaining guests. It was also considered that brightness of the light was enough for most Australians.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.418-426
• /
• 2008

A surface blasting method with a single tree face is currently used in Pasir Coal Mine in Indonesia. The single free face is usually the ground surface. This kind of blasting method is easy to use but inevitably causes enormous ground vibrations, which, in turn, can affect the stability of the slopes comprising the various boundaries of the open pit mine. In this regard, we decided to make a specific blasting guideline for the control of found vibrations to ensure the safety of the pit slopes and waste dumps of the mine. Firstly, we derived a prediction equation for the ground vibration levels that could be occurred during blasting in the pits. Then, we set the allowable levels of ground vibrations for the pit slopes and waste dumps as peak particle velocities of 120mm/s and 60mm/s, respectively. From the prediction equation and allowable levels, safe scaled distances were established for field use. The blast design equations for the pit slopes and waste dumps were $D_s{\geq}5\;and\;D_S{\geq}10$ respectively. We also provide several standard blasting patterns for the hole depths of $3.3{sim}8.8m$.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.318-321
• /
• 2009

Purpose: The bony mallet finger injury is generally managed by conservative treatments, but operative treatments are needed especially when the fractures involve above 30% of articular surface or distal phalanx is accompanied by subluxation in the volar side. This is the reason they often result in chronic instability, articular subluxation and unsatisfactory cosmetic. In this report, We describe new method using the hook plate as an operative treatment of Mallet finger deformity. Methods: Among 13 patients with Mallet finger deformity who came from February 2006 to February 2008, six patient were included in surgical indication. Under local anesthesia, H or Y type incision was made at the DIP joint area. After the DIP joint extension, the hook plate was put on the fracture line, and one self tapping screw was used for fixation. 2 hole plate which was one of the holes in 1.5 mm diameter was cut in almost half and bended through approximately $100^{\circ}$. Results: In all six cases which applied the hook plate, complications such as loss of reduction or nail deformity were not seen. In only one patient, hook pate was removed due to inflammatory reaction after surgery. At 2 weeks after operation, active motion of DIP joint was performed. The result was satisfactory not only cosmetically but also functionally. At 6 weeks after operation, the range of motion of DIP joint was average $64^{\circ}$. Conclusion: The purpose of the operative treatment for mallet finger deformity using the hook plate is to provide anatomical reduction with rigid fixation and to prevent contracture at the DIP joint. While other operations take 6 weeks, the operation using the hook plate begins an active motion at 2 weeks after operation. Complication rate was low and the method is rather simple. Thus, the operation using the hook plate is recommended as a good alternative method of the mallet finger deformity treatment.

• Journal of Korean Medical classics
• /
• v.12 no.1
• /
• pp.168-195
• /
• 1999

The hakgil is the important disease in the oriental medicine historically. In the preseant time also this disease continually appear all over the world. So purpose of this study is that consider the symptoms and pathogenesis of hakgil(瘧疾) with the point of view of oriental medicine. And in this study, the results are summarized as the followings. 1. The symptos of hakgil(瘧疾). 1) Rigor and heat spasm : The main symptoms of hakgil is the severe and periodical rigor and heat spasm. Generally the rigor first appear and later the heat spasm appear. According to the first and last, severe and weak, the hakgil is classified to hanhak(寒瘧), onhak(溫瘧), danhak(癉瘧), binhak(牝瘧). 2) The regulation of the time of spasm : The spasm occour in the same time daily or one time in two days, three days or several days. And the spasm time is regulary in day or night. 3) The term between the spasm and next one become later or faster. It can be decided that the becoming worse and better in the disease with the signs. 4) The seasonal property Generally the hakgil appear in summer and early autumn. 5) The other kind of hakgil there are five-organ hakgil(五臟瘧), six-kyung hakgil(六經瘧), janghak(瘴瘧), kuihak(鬼瘧), six-gi hakgil(六氣瘧), damhak(痰瘧), sikhak(食瘧), and so on. 6) The pulse condition of the hakgil is chiefly hyun(弦). 2. The pathogenesis of the hakgil 1) The cause of the hakgil The causes of the hakgil first are the seo(暑) or heat(熱) that make the problem in the cycle of five phases(五行). In the consequence, il open the hole of skin so that the pathogenic factors easily invade the humanbody and at the same time the pathogenic factor in the inside easily come out, that make the spasm. In the second time the pathogenic factor of yin(陰) - wind(風), cold(寒), water(水) invade through the opened skin to combine with the factor in the inside. Such condition make the hakgil and the accessory spasm. 2)The pathogenesis of hakgil(瘧疾) (1) The rigor and heat spasm of hakgil(瘧疾) appear because in summer the human body don't accomplish a task of summer because of hot weather or heat, so in autumn the ki(氣) of human body separate into yin(陰) and yang(陽), and the skin of human body is weaken so the saki(邪氣: pathogenic factors) is easily come into the human body. At this time the circulation of ki(氣) is obstructed, so the jungki(精氣: vital substance) apply to straighten the circulation of ki(氣), if the jungki(精氣: vital substance) help the yin(陰) the rigor spasm appear in the opposit direction the jungki(精氣: vital substance) help the yang(陽) the heat spasm appear. (2) The period of circulation of ki(氣) and jungki(精氣: vital substance) is one day, so the general period of spasm of hakgil(瘧疾) is one day, But if the saki(邪氣: pathogenic factors) come into the human body deeply, the jungki(精氣: vital substance) cannot apply 10 straighten the circulation of ki(氣) every day so the period of spasm become longer.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.57-62
• /
• 2011

The energy conversion efficiency of DSSCs (Dye-Sensitized Solar Cells) is dependent on the powder size, the structure, and the morphology of $TiO_2$ electrode. The higher efficiency is obtained with high surface area of the nanoanatase-$TiO_2$ powder adsorbed onto a lot more of the dye. Also, the enhancement of light scattering increases the efficiency with high adsorption of the dye. Powder size, crystalline phase, and shape of $TiO_2$ obtained by hydrothermal method have 15-20 nm, anatase and round. $TiO_2$ electrode has fabricated with the mixture of scattering $TiO_2$ particle with 0.4 ${\mu}m$ in nano-sized powder. Conversion efficiency of series of DSSCs was measured with volume fraction of scattering particle. Photovoltaic characteristics of DSSCs with 10% scattering particles are 3.51 mA for Jsc (short circuit current), 0.79 V for Voc(open circuit potential), filling factor 0.619 and 6.86% for efficiency. Jsc was improved by 11% and enhancement of efficiency by 0.77% compared with that of no scattering particles. The confinement of inserted light by light scattering particles has more increase of the injection of exiton(electron-hole pair) and decrease of moving path in electron. Efficiencies of DSSCs with more than 10% for scattering particles have reduced with increasing the pore in the $TiO_2$ electrode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.509-514
• /
• 2020

The two key variables of an Si solar cell, i.e., emitter (n-type window layer) and base (p-type substrate) doping levels or concentrations, are studied using Medici, a 2-dimensional semiconductor device simulation tool. The substrate is p-type and 150 ㎛ thick, the pn junction is 2 ㎛ from the front surface, and the cell is lit on the front surface. The doping concentration ranges from 1 × 10¹⁰ cm^-3 to 1 × 10²⁰ cm^-3 for both emitter and base, resulting in a matrix of 11 by 11 or a total of 121 data points. With respect to increasing donor concentration (Nd) in the emitter, the open-circuit voltage (Voc) is little affected throughout, and the short-circuit current (Isc) is affected only at a very high levels of Nd, exceeding 1 × 10¹⁹ cm^-3, dropping abruptly by about 12%, i.e., from Isc = 6.05 × 10^-9 A·㎛^-1, at Nd = 1 × 10¹⁹ cm^-3 to Isc = 5.35 × 10^-9 A·㎛^-1 at Nd = 1 × 10²⁰ cm^-3, likely due to minority-carrier, or hole, recombination at the very high doping level. With respect to increasing acceptor concentration (Na) in the base, Isc is little affected throughout, but Voc increases steadily, i.e, from Voc = 0.29 V at Na = 1 × 10¹² cm^-3 to 0.69 V at Na = 1 × 10¹⁸ cm^-3. On average, with an order increase in Na, Voc increases by about 0.07 V, likely due to narrowing of the depletion layer and lowering of the carrier recombination at the pn junction. At the maximum output power (Pmax), a peak value of 3.25 × 10^-2 W·cm^-2 or 32.5 mW·cm^-2 is observed at the doping combination of Nd = 1 × 10¹⁹ cm^-3, a level at which Si is degenerate (being metal-like), and Na = 1 × 10¹⁷ cm^-3, and minimum values of near zero are observed at very low levels of Nd ≤ 1 × 10¹³ cm^-3. This wide variation in Pmax, even within a given kind of solar cell, indicates that selecting an optimal combination of donor and acceptor doping concentrations is likely most important in solar cell engineering.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.2
• /
• pp.143-148
• /
• 2002

Purpose: We examined patients to evaluate the clinical results of traumatic metacarpophalangeal(M-P) dislocations of the thumb, uncommon and irreducible. Materials and Methods: In 11 traumatic M-P dislocations of the thumb, the types of dislocations were 10 dorsal and 1 volar dislocations resulted from the impacted and hyperextended forces on thumb. Authors evaluated the possibility of closed reduction, the anatomical structures interfering with closed reduction, and the surgical approaches. Results: Eight cases were treated with open reduction through volar approach and two cases were treated with closed reduction. Joint fusion was done with a plate in a chronic case. Initial closed reduction was attempted in all cases, but succeeded in only 2 cases because the interposed ruptured volar plate, the flexor pollicis brevis tendon and ulnar sesamoid bone at the volar side of the M-Pjoint were the obstacles to reduce. The metacarpal head was caught in button-hole slit between theflexor pollicis brevis and the ruptured volar joint capsule in all cases. Conclusion: Similar with the M-P joint dislocations of other fingers, the dorsal complex M-P dislocations of the thumb due to hyper extension are unusual and can't easily be reduced by closed manipulation. It is necessary to pay attention to the ruptured volar plate, capsule, the subluxated portion ofthe sesamoid and flexor pollicis brevis as interfering structures.