• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1576-1589
• /
• 2006

Most of surface water ways in Egypt suffer from the infestation of aquatic weeds especially submerged ones which cause lots of problems for the open channels and the water structures such as increasing water losses, obstructing the water flow, and reducing the efficiency of the water structures. Accurate simulation of the water flow behavior in such channels is very essential for water distribution decision makers. Artificial Neural Network (ANN) has been widely utilized in the past ten years in civil engineering applications for the simulation and prediction of the different physical phenomena and has proven its capabilities in the different fields. The present study aims towards introducing the use of ANN technique to model and predict the impact of the existence of submerged aquatic weeds on the hydraulic performance of open channels. Specifically the current paper investigates utilizing the ANN technique in developing a simulation and prediction model for the flow behavior in an open channel experiment that simulates the existence of submerged weeds as branched flexible elements. This experiment was considered as an example for implementing the same methodology and technique in a real open channel system. The results of current manuscript showed that ANN technique was very successful in simulating the flow behavior of the pre-mentioned open channel experiment with the existence of the submerged weeds. In addition, the developed ANN models were capable of predicting the open channel flow behavior in all the submerged weeds' cases that were considered in the ANN development process.

• Journal of Chest Surgery
• /
• v.30 no.5
• /
• pp.506-511
• /
• 1997

To understand the clinical results of aortic root replacement with either inclusion or open technique, we analysed 53 patients who underwent replacement of the aortic root with composite graft between October,1980, and May, 1995. Annuloaortic ectasia was the most common indication for operation(29 patients), follwed by aortic dissection(22 patients). Among 53 patients, 19(35%) had Marfan syndrome. Three patients died during hospitalization (Mortality: 5.5%). The follow up was possible in 48 patients(Follow-up rate; 94%,mean duration;37 months). The actuarial survival rate at 24 months was 95% in open technique group, and 87% in inclusion technique group. Late complications developed in 10 patients. Dissecting aneurysm in the remaining aorta was noted in 3 patients with inclu ion 1,schnique, and a pseudoaneurysm from coronary artery anastomosis site developed in a patient with inclusion technique. In conclusion, there was no statistical differences in survival for 24 months between inclusion technique and open technique group. But late problems in the remaining aorta or death from unknown cause occurred with moderate frequency : careful follow-up after aortic root replacement thought to be important for long term survival.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.201-208
• /
• 2008

Statement of problem: A new implant impression technique which use abutments as impression coping, and use resin cement as a splinting material was described. Accuracy of this technique was compared with conventional closed tray and resin splinted open tray technique for a $15^{\circ}$ angled 3-implant model Material and methods: A dental stone master model with 3 linearly positioned implant analogue and a reference framework which was passively fitted to it were fabricated. The center analogue was perpendicular to the plane of model and the outer analogues had a $15^{\circ}$angulation forward or backward. 10 closed tray impressions, 10 resin splinted open tray impressions, 10 abutment-resin framework cementation impressions and 10 abutment-metal framework cementation impressions were made with additional silicone material and poured with dental stone. A light microscope with image processing was used to record the vertical gap dimension between reference framework and analogue of duplicated cast made with each 4 impression techniques. Statistical analysis used one-way ANOVA with post-hoc tests Tukey test of .05 level of significance Results: Significant difference in the vertical gap dimension was found between closed tray technique; 74.3 (${\pm}33.4$)${\mu}m$ and resin splinted open tray technique, and two other new technique. (P<.05) Abutment-metal framework cementation technique;42.5 (${\pm}11.9$)${\mu}m$ was significantly different from resin splinted open tray technique. (P<.05) Abutmentresin framework cementation technique;51.0 (${\pm}14.1$)${\mu}m$ did not differ significantly from resin splinted open tray technique;50.3 (${\pm}16.9$)${\mu}m$. (P>.05) Conclusion: Within limitations of this study, the accuracy of implant level impressions of resin splinted open tray technique was superior to that of closed tray technique. A new technique using abutment and metal framework cementation was more accurate than resin splinted open tray technique.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.549-552
• /
• 2004

Since open-cut mining excavates gradually from the top of the mountain, vegetation planting is needed to reduce negative environmental impact on the surrounding environment. Accordingly, this study aimed at performing the environmental monitoring of the open-cut mining ground using the satellite remote sensing technique. As the research technique, in order to grasp the environmental change around the open-cut mining ground, NDVI (normalized difference vegetation index) was calculated, and every year change of the vegetation activity was analyzed. The results of the study showed lower vegetation activity in the open-cut mining ground compared to the surrounding areas and suggested the need for closed monitoring by remote sensing techniques.

• Journal of Korean Foot and Ankle Society
• /
• v.14 no.2
• /
• pp.151-156
• /
• 2010

Purpose: To analyze the clinical and radiological results of operative treatment in patients with tongue type intra-articular calcaneal fracture, and to compare the open reduction and Essex-Lopresti technique. Materials and Methods: We examined a consecutive series of 42 patients who received surgical treatment for tongue type calcaneal fracture (24 cases of the open reduction and 18 cases of the Essex-Lopresti technique) and the postoperative data was compared with a minimum 1 year follow-up. The clinical outcome was analyzed using the American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot scale and Salama's criteria. The preoperative, postoperative, and last follow-up changes in the Bohler angle was radiologically analyzed. Results: There were no significant differences between the two groups in terms of the clinical and radiological results at the last follow-up. However, for the Sander's type 3 and 4 fractures, the open reduction group showed more improvement of AOFAS score and less reduction loss in the Bohler angle. Conclusion: Although the clinical results were good irrespective of surgical technique, the open reduction and internal fixation can improve clinical outcome and reduce the reduction loss as compared with the Essex-Lopresti technique in the comminuted tongue type calcaneal fracture.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.682-690
• /
• 2015

Among location-based systems, a route search service is very highly utilized as a representative technique, but it provides relatively low accuracy when we find a route path on foot in our real environment. In this paper, we design and implement an optimized route search technique based on user experience utilizing open APIs as location-based services. Finally, we develop an Android-based application to provide this feature. In our experiment, we found that our technique enhanced performance by about 14-36% compared to previous solutions, such as route path searches using map APIs. In addition, the performance of our technique can be further enhanced, as the number of users who find such optimized route path is increasing.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.394-396
• /
• 2007

Radio occultation (RO) technique has been used in planetary science since 1960s. When signal goes through atmosphere, it is refracted due to the gradient of atmospheric refractivity. In 1995, the first low earth orbit (LEO) satellite, MicroLab-1, was launched to conduct RO mission. It receives the signal from global positioning system (GPS) satellites. After MicroLab-1, other RO missions, such as CHAMP, SAC-C, and GRACE, are executed in several years later. In 2006, Taiwan launched six LEO satellites for RO mission. The mission name is Constellation Observing System for Meteorology, Ionosphere and Climate (COSMIC). Under some abnormal situations, multipath and strong fluctuation in phase and amplitude of the signal appear in moist troposphere. Therefore, open loop (OL) technique has been applied to replace traditional phase lock loop (PLL) technique. In this paper, we will summarize the retrieval processing procedure and discuss the advantages and disadvantages of OL technique.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.4 no.2
• /
• pp.121-135
• /
• 2009

Objectives : This study was carried out to investigate the effects of "Yangmuji Anchu Traction Technique" on Temporomandibular Joint Disorder Patient. Methods : The therapies were Chuna("Yangmuji Anchu Traction Technique"), acupuncture treatment, Carthami-Semen Herbal Acupuncture treatment and herbal medicine. We estimated the effects of treatment by measuring from a lower front teeth to upper front teeth in open mouth, measuring a gap of center line on front teeth in open mouth. And by measuring Visual Analog Scale(VAS) and Patient Global Assessment(PGA) before and after treatment. Results : After treatment, we confirmed these improvements : the length measuring from a lower front teeth to upper front teeth in open mouth and the gap of center line on front teeth in open mouth was improved in all cases. Also Visual Analog Scale(VAS) was improved in all cases. Conclusions : These results suggested that "Yangmuji Anchu Traction Technique" effected for Temporomandibular Joint Disorder Patient.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.174-177
• /
• 2001

The automated computer-aided drafting technique is attempted for drawing process pictures of axisymmetric solid forgings which are mainly used in automobile industry. For this study basic concepts to draw the shape of an element are described and applied to the 2-dimensional and 3-dimensional modeling of forged parts. 2-dimensional display of process pictures is developed by using AutoLISP language in AutoCAD software of a drafting technique and 3-dimensional view of process pictures is based on the UG/open API and UG/open GRIP languages of Unigraphics software. Testing the developed program to forging of bolts and ballstuds, it was shown to give good results to be applicable in forging industry.

• Structural Engineering and Mechanics
• /
• v.40 no.1
• /
• pp.85-103
• /
• 2011

Integration of finite element analysis (FEA) software into various software platforms is commonly used in coupling systems such as systems involving structural control, fluid-structure, wind-structure, soil-structure interactions and substructure method in which FEA is used for simulating the structural responses. Integrating an FEA program into various other software platforms in an efficient and simple way is crucial for the development and performance of the entire coupling system. The lack of simplicity of the existing integration methods makes this integration difficult and therefore entails the motivation of this study. In this paper, a novel practical technique, namely CS technique, is presented for integrating a general FEA software framework OpenSees into other software platforms, e.g., Matlab-$Simulink^{(R)}$ and a soil-structure interaction (SSI) system. The advantage of this integration technique is that it is efficient and relatively easy to implement. Instead of OpenSees, a cheap client handling TCL is integrated into the other software. The integration is achieved by extending the concept of internet based client-server concept, taking advantage of the parameterization framework of OpenSees, and using a command-driven scripting language called tool command language (TCL) on which the OpenSees' interface is based. There is no need for any programming inside OpenSees. The presented CS technique proves as an excellent solution for the coupling problems mentioned above (for both linear and nonlinear problems). Application examples are provided to validate the integration method and illustrate the various uses of the method in the civil engineering.