• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.805-810
• /
• 2008

Using metallic Ti powder as raw materials and 1,2-diaminocyclohexane (DACH) as the trial template, two novel reduced titanophosphate open-structures were hydrothermally isolated by varying the $H_3PO_4/H_2O$ ratio to adjust the pH value. TiPO-1 crystallizes in orthorhombic Pbca space group with cell parameters a = 21.956(3) $\AA$, b = 8.6268(11) $\AA$, c = 7.2883(9) $\AA$, V = 1380.5(3) $\AA^3$, Z = 4. TiPO-2 crystallizes in triclinic space group P$\bar{1}$ with parameters a = 5.1620(10) $\AA$, b = 8.815(2) $\AA$, c = 10.655(3) $\AA$, $\alpha$ = $99.45^{\circ}$, $\beta$ = $102.94^{\circ}$, $\gamma$ = $91.06^{\circ}$, V = 465.34 $\AA^3$. TiPO-1 is constructed by infinite -Ti-O-Ti-O- linkage that is capped by $PO_4$ groups to form a chain structure with protonated DACH molecules occupying the interchain spaces. TiPO-2 represents a rare 3-D reduced titanophosphate with 12-MR channels. The structure of TiPO-2 is a neutral framework with water molecules located in the channels.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.434-440
• /
• 2007

The Effluent ground water overflows in deep and broad ground space building. Temperature of effluent ground water is in 12$\sim$18$^{\circ}C$ annually and the quality of that water is as good as living water. Therefore if the flow rate of effluent ground water is sufficient as source of heat pump, that is good heat source and heat sink of heat pump. Effuent ground water contain the thermal energy of surrounding ground. So this is a new application of ground source heat pump. In this study open type and close type heat pump system using effluent ground water was installed and tested for a church building with large and deep ground space. The effluent flow rate of this building is 800$\sim$1000 ton/day. The heat pump capacity is 5RT each. The heat pump system heating COP was 3.0$\sim$3.3 for the open type and 3.3$\sim$3.8 for the close type system. The heat pump system cooling COP is 3.2$\sim$4.5 for the open type and 3.8$\sim$4.2 for close type system. This performance is up to that of BHE type ground source heat pump.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.104.1-104.1
• /
• 1997

The purpose of this study is to grasp the characteristics of user''''s response to perceived safety and visual preferences for outdoor green spaces by the types of campus layouts. This research was investigated by color slide ratings and questionnaire survey to the students who are majoring in Landscape architecture in three universities locating at Taegu area. Two research sites have similarities in many ways but have differences in campus land form and design type such as ''''Closed'''' and ''''Open'''' types. Major results were summarised as follows ; 1. As a result of the slide test, the high degree of visual preference was shown in the campus that is ''''Closed'''' type. However the degree of perceived safety was lower than that of in Youngnam Univ. campus. 2. According to the result of the comparative analysis between user''''s perceived safety and visual preferences in each campus, the degree of perceived safety at ''''Closed'''' type was lower than that of ''''Open'''' type, but the degree of visual satisfactioni was higher at ''''Closed'''' type. 3. The factors affecting visual preference in campus were shown as density of wood, land form, and diverse type of the spaces. On the other hand, the factors affecting perceived safety were ''''enclosed space by wood'''' at the day time, and ''''the condition of lighting'''' at night. 4. Regarding gender differences in sensation of each space variables, female users showed higher satisfactio on the scenic beauty. 5. Regression analysis showed that general satisfation was determined by the variables such as ''''arrangement'''', familiarity'''', ''''cleanness'''', and ''''closed feeling'''', in Kyungbook Univ. And in Youngnam Univ. , the variables were ''''texture'''', ''''perceived beauty'''', ''''cleanness'''', and ''''complexity'''' respectively. 6. In conclusion, campus users wanted the outdoor spaces that have various land form and somewhat ''''open-closed'''' mixture type, which has a good ''''Edge Effect'''' to satisfy both aspects in safety and visual preferneces.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.104-116
• /
• 1997

The purpose of this study is to grasp the characteristics of user's response to perceived safety and visual preferences for outdoor green spaces by the types of campus layouts. This research was investigated by color slide ratings and questionnaire survey to the students who are majoring in Landscape architecture in three universities locating at Taegu area. Two research sites have similarities in many ways but have differences in campus land form and design type such as 'Closed' and 'Open' types. Major results were summarised as follows ; 1. As a result of the slide test, the high degree of visual preference was shown in the campus that is 'Closed' type. However the degree of perceived safety was lower than that of in Youngnam Univ. campus. 2. According to the result of the comparative analysis between user's perceived safety and visual preferences in each campus, the degree of perceived safety at 'Closed' type was lower than that of 'Open' type, but the degree of visual satisfactioni was higher at 'Closed' type. 3. The factors affecting visual preference in campus were shown as density of wood, land form, and diverse type of the spaces. On the other hand, the factors affecting perceived safety were 'enclosed space by wood' at the day time, and 'the condition of lighting' at night. 4. Regarding gender differences in sensation of each space variables, female users showed higher satisfactio on the scenic beauty. 5. Regression analysis showed that general satisfation was determined by the variables such as 'arrangement', familiarity', 'cleanness', and 'closed feeling', in Kyungbook Univ. And in Youngnam Univ. , the variables were 'texture', 'perceived beauty', 'cleanness', and 'complexity' respectively. 6. In conclusion, campus users wanted the outdoor spaces that have various land form and somewhat 'open-closed' mixture type, which has a good 'Edge Effect' to satisfy both aspects in safety and visual preferneces.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.91-96
• /
• 2004

An optimal design of the gas generator for Liquid Rocket Engine (LRE) was conducted. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton in thrust with RP-1/LOx propellant. The optimal design was done for maximizing specific impulse of thrust chamber with constraints of combustion temperature and for matching the power requirement of turbopump system. Design variables are total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design provide length, diameter, and contraction ratio of gas generator. And the operational condition predicted by design code with resulting configuration was found to maximize the objective function and to meet the design constraints. The results of optimal design will be tested and verified with combustion experiments.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.305-317
• /
• 2019

The RMR and Q-system for characterizing rock mass and drilling core, and for estimating the support and reinforcement measures in mine galleries, tunnels and caverns have been widely used by engineers. SMR has been widely used in the rock mass classification for rock slope, but Q-Slope has been introduced into slopes since 2015. In the last ten years, a modified Q-system called Q-slope has been tested by the many authors for application to the benches in open pit mines and excavated road rock slopes. The results have shown that a simple correlation exists between Q-slope values and the long-term stable and unsupported slope angles. Just as RMR and Q have been used together in a tunnel or underground space and complemented by comparison, Q-Slope can be used in parallel with SMR. This paper introduces how to use Q-Slope which has not been announced in Korea and application examples of Pasir open pit coal mine in Indonesia.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.283-288
• /
• 2019

In this paper, there is summarized the validation of ground test results through the telemetry acquired during on-orbit initial activation on solar-array drive assembly(SDA) of GK2A launched at Dec-5, 2018. Especially, the decision logic of SDA initial position and the compensation logic are validated and confirmed. The SDA initial position is needed when GK2A enter to geostationary orbit from transfer orbit and the compensation logic is for the accumulated position error due to the open-loop control. Up to now, it is normal operating. Also the periodic offset between the geostationary orbit and Sun position is found that it is not checked on design phase, and then the proper threshold value is applied.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.549-555
• /
• 2021

Open hole strength of composite laminates is often used as the design allowable strength for designing composite aircraft structures, particularly those structures subjected to impact loading. Generally, the degradation of strength due to a barely visible impact damage (BVID) is assumed as the strength of 6.0 mm hole diameter in 24.0 mm width specimen. In this study, the residual strength static tests of composite laminates containing circular holes have been performed to investigate the effects of fiber orientation structure on open hole strength. The point stress criterion using a characteristic length is used to predict the open hole strength. The finite element analysis has been used to validate the analytical method. From the test results, it is shown that the characteristic length is related to the percentage of 0°, ±45° and 90° plies of the laminate. And regression analysis has performed to determine the characteristic length and strength of no hole specimens on the arbitrary layup pattern.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.117-124
• /
• 2021

Among growth disorders, 'Short Stature' can be improved through rapid diagnosis and treatment, and for that, it is important to detect early'Short Stature'. It is recommended to measure the height steadily for early detection of 'Short Stature' and checking the kid's growth process, but existing height measurement methods have problems such as time and space limitations, cost occurrence, and difficulty in keeping records. So in this paper, we proposed an 'Development of Kid Height Measurement Application based on Image using computer vision' method using smart phones, a medium that is highly accessible to people. In images taken through a smartphone camera, the kid's height is measured using algorithms from OpenCV, a computer vision library, and the measured heights were printed on the screen through 'a comparison graph with the standard height by gender and age' and 'list by date', made possible to check the kid's growth process. It is expected to measure height anytime, anywhere without time and space limitations and costs through this proposed method, and it is expected to help early detection of 'Short Stature' and other disorder through steady height measurement and confirmation of growth process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.997-1004
• /
• 2020

A synchropter is a type of rotorcraft in which a pair of blades inclined with each other rotates in synchronization. Removing the tail rotor enables an efficient and compact configuration similar to a coaxial-rotor helicopter. This paper describes the design and flight test results of a small synchropter to examine the suitability of a drone system for the army. The synchropter in this paper is a small vehicle with a rotor diameter of 1.4m and a weight of 7kg and was assembled based on commercial parts to examine flight characteristics effectively. The flight control system adopted Pixhawk, which is designed based on an open-architecture. The model-based design technique is applied to develop the control law of the synchropter and a new firmware embedded on the Pixhawk. Through qualitative flight tests, we analyzed the flight characteristics. As a result of the analysis, we confirmed the possibility of application as a drone system of the synchropter.