DOI QR코드

DOI QR Code

Validation on Solar-array Drive Assembly of GEO-KOMPSAT-2A Through In-orbit Operation

천리안2A호 태양전지판구동기 궤도상 운영 검증

  • Received : 2019.01.29
  • Accepted : 2019.03.20
  • Published : 2019.04.01

Abstract

In this paper, there is summarized the validation of ground test results through the telemetry acquired during on-orbit initial activation on solar-array drive assembly(SDA) of GK2A launched at Dec-5, 2018. Especially, the decision logic of SDA initial position and the compensation logic are validated and confirmed. The SDA initial position is needed when GK2A enter to geostationary orbit from transfer orbit and the compensation logic is for the accumulated position error due to the open-loop control. Up to now, it is normal operating. Also the periodic offset between the geostationary orbit and Sun position is found that it is not checked on design phase, and then the proper threshold value is applied.

본 논문은 천리안위성 2A호가 2018년도 12월 5일에 발사되고 태양전지판구동기의 초기운영을 수행하면서 획득된 텔레메트리를 통해 지상에서 개발하고 시험한 결과에 대한 우주검증 결과를 정리하였다. 특히, 전이궤도 이후 정지궤도에 진입하면서 태양전지판구동기의 위치 설정 로직과 open-loop 제어에 의한 누적오차 보상 로직에 대한 결과를 검증하고 정상 운영이 되고 있음을 확인할 수 있었다. 또한, 설계 단계에서 확인되지 못했던 정지궤도 대비 태양의 위치가 시간에 따라 주기적인 오프셋이 있음을 발견하고 그에 적합한 보정 threshold 값을 설정하게 된 결과도 정리하였다.

Keywords

References

  1. Panhofer, T., GK2 SADA MIL-1553 TC/TM ICD, GK2-450-12-6200 issue 6.0, 2017, pp.10-30.
  2. Park, Y. W., and Park, K. J., "The Initial Target Position of Solar Array and the Verification on Geostationary Earth Orbit Korea Multi Purpose Satellite," Proceedings of the Korean Society for Aeronautical and Space Sciences Spring Conference, April 2018, pp.333-334.