• Tuberculosis and Respiratory Diseases
• /
• 제39권3호
• /
• pp.219-227
• /
• 1992

연구배경 : 기관지 천식의 병인에 염증반응이 중요한 역할을 한다고 알려져 있고 염증을 억제하기 위해 스테로이드제제가 치료제로서 가장 많이 사용되고 있다. 흡입용 스테로이드는 전신적 부작용이 적어 경구용 스테로이드보다 비교적 안전하게 사용되고 있으나 효과와 부작용에 대하여는 아직 논란이 많다. 이에 저자들은 기관지 천식환자에서 흡입용 스테로이드인 budesonide의 효과와 전신적 부작용의 지표로서 부신피질-뇌하수체축에 대한 영향을 알고자 본 실험을 했다. 방법 : 강남성모병원에 내원한 기관지 천식환자 23명에서 내원당시, placebo투여 2주후, budesonide투여후 3주와 6주에 임상증상, 폐기능 검사, 히스타민 기도 유발검사, 오전 8시와 오후 4시의 ACTH 및 cortisol을 측정하여 비교하였다. 결과 : 1) 폐기능의 변화 : PEFR, FEV1, FVC가 budesonide 치료 3주일부터 증가하기 시작하여 치료전보다 의미있는 개선효과가 있었다. 2) 증상의 변화 : 호흡곤란 치료후 3주일과 6주일후에 의미있는 증상의 개선이 있었다. 객담 : 치료후 3주일과 6주일에 치료전보다 의미있는 증상의 개선이 있었다. 수포음 : 치료후 3주일과 6주일에 의미있는 차이가 있었다. 3) 히스타민 기도 유발 시험 : 치료 3주일에는 의미있는 차이는 없었으나, 치료 6주일에 의미있는 차이가 있었다(p<0.05). 4) 혈중 Cortisol의 변화 : Budesonide 6주일 치료후에 오전 8시와 4시의 cortisol에는 의미있는 차이가 없었다. 5) 혈중 ACTH의 변화 : Budesonide 6주 치료 전후의 혈중 ACTH에는 영향이 없었다. 결론 : 이상의 결과로 기관지 천식의 치료에 흡입용 스테로이드인 budesonide는 하루 $800{\mu}g$씩 투여할 경우 치료후 3주일부터 유의한 증상의 개선효과가 나타나기 시작하여 6주일후에는 3주일보다 임상증상이 더욱 개선되고, 부신피질-뇌하수체축에는 뚜렷한 억제능이 없는 것으로 사료된다.

• Asia pacific journal of information systems
• /
• 제19권3호
• /
• pp.99-124
• /
• 2009

Many firms in Korea have adopted and used advanced information technology in an effort to boost efficiency. The process of adapting to the new technology, at the same time, can vary from one firm to another. As such, this research focuses on several relevant factors, especially the roles of social interaction as a key variable that influences the technology adaptation process and the outcomes. Thus far, how a firm goes through the adaptation process to the new technology has not been yet fully explored. Previous studies on changes undergone by a firm or an organization due to information technology have been pursued from various theoretical points of views, evolved from technological and institutional views to an integrated social technology views. The technology adaptation process has been understood to be something that evolves over time and has been regarded as cycles between misalignments and alignments, gradually approaching the stable aligned state. The adaptation process of the new technology was defined as "appropriation" process according to Poole and DeSanctis (1994). They suggested that this process is not automatically determined by the technology design itself. Rather, people actively select how technology structures should be used; accordingly, adoption practices vary. But concepts of the appropriation process in these studies are not accurate while suggested propositions are not clear enough to apply in practice. Furthermore, these studies do not substantially suggest which factors are changed during the appropriation process and what should be done to bring about effective outcomes. Therefore, research objectives of this study lie in finding causes for the difference in ways in which advanced information technology has been used and adopted among organizations. The study also aims to explore how a firm's interaction with social as well as technological factors affects differently in resulting organizational changes. Detail objectives of this study are as follows. First, this paper primarily focuses on the appropriation process of advanced information technology in the long run, and we look into reasons for the diverse types of the usage. Second, this study is to categorize each phases in the appropriation process and make clear what changes occur and how they are evolved during each phase. Third, this study is to suggest the guidelines to determine which strategies are needed in an individual, group and organizational level. For this, a substantially grounded theory that can be applied to organizational practice has been developed from a longitudinal comparative case study. For these objectives, the technology appropriation process was explored based on Structuration Theory by Giddens (1984), Orlikoski and Robey (1991) and Adaptive Structuration Theory by Poole and DeSanctis (1994), which are examples of social technology views on organizational change by technology. Data have been obtained from interviews, observations of medical treatment task, and questionnaires administered to group members who use the technology. Data coding was executed in three steps following the grounded theory approach. First of all, concepts and categories were developed from interviews and observation data in open coding. Next, in axial coding, we related categories to subcategorize along the lines of their properties and dimensions through the paradigm model. Finally, the grounded theory about the appropriation process was developed through the conditional/consequential matrix in selective coding. In this study eight hypotheses about the adaptation process have been clearly articulated. Also, we found that the appropriation process involves through three phases, namely, "direct appropriation," "cooperate with related structures," and "interpret and make judgments." The higher phases of appropriation move, the more users represent various types of instrumental use and attitude. Moreover, the previous structures like "knowledge and experience," "belief that other members know and accept the use of technology," "horizontal communication," and "embodiment of opinion collection process" are evolved to higher degrees in their dimensions of property. Furthermore, users continuously create new spirits and structures, while removing some of the previous ones at the same time. Thus, from longitudinal view, faithful and unfaithful appropriation methods appear recursively, but gradually faithful appropriation takes over the other. In other words, the concept of spirits and structures has been changed in the adaptation process over time for the purpose of alignment between the task and other structures. These findings call for a revised or extended model of structural adaptation in IS (Information Systems) literature now that the vague adaptation process in previous studies has been clarified through the in-depth qualitative study, identifying each phrase with accuracy. In addition, based on these results some guidelines can be set up to help determine which strategies are needed in an individual, group, and organizational level for the purpose of effective technology appropriation. In practice, managers can focus on the changes of spirits and elevation of the structural dimension to achieve effective technology use.

• 한국해양학회지:바다
• /
• 제18권2호
• /
• pp.89-103
• /
• 2013

경제 발전에 따라 레저, 해운, 수산, 국방, 해난사고 등 해양을 이용하는 활동이 증가하면서 해양예보에 대한 수요가 크게 증가하고 있다. 기상에서 해양의 역할이 새롭게 인식되면서 정확한 기상 및 기후변화를 예측하기 위한 해양 예측의 필요성도 증가하고 있다. 사회적인 요구와 관련 기술의 발전에 힘입어 선진국을 중심으로 해양예측시스템이 수립되어 왔다. 이 연구에서는 세계적으로 해양예측시스템을 발전시키고 확산시킨 국제협력프로그램 GODAE(Global Ocean Data Assimilation Experiment)의 진행과정과 기여를 정리하였다. 그리고 현재 해양예측시스템을 운용 중인 미국, 프랑스, 영국, 이탈리아, 노르웨이, 호주, 일본, 중국이 해양예측시스템을 구축하면서 세웠던 목적과 비전, 역사, 연구 동향을 조사하고 각 나라의 해양예측시스템 현황을 비교하였다. 우리보다 앞서 해양예측시스템을 구축하여 사용하고 있는 나라들이 취한 개발 전략의 특징은 다음과 같이 요약해 볼 수 있다. 첫째, 국가적인 역량을 집중하여 성공적인 현업 해양예측시스템을 구축하였다. 둘째, 국제적인 프로그램을 통해 선진 기술을 공유하고 상호 발전시켰다. 셋째, 각 기관의 역할과 고유 목적에 따라 기여분야를 나눠가졌다. 국내에서도 최근 현업 해양예측시스템에 대한 수요가 증대되고 있다. 기상청, 국립해양조사원, 국립수산과학원, 국방과학연구소의 해양예측시스템 개발에 관한 현재 상황과 향후 장기적 계획을 조사하였다. 국지 해양예측 또는 기후예측 모델을 위한 개방경계 초기장 제공이 가능한 광역의 정확도 높은 해양예측시스템을 구축하기 위해서는 국내의 유관 기관 간 협력 관계가 필수적이다. 이를 위해 관련 기관과 연구자들이 함께 참여하는 컨소시엄 형성이 바람직하다. 컨소시엄을 통해 경쟁력 높은 예측 모델과 시스템을 구축할 수 있으며, 제한된 재원을 효율적으로 활용할 수 있고, 연구 개발 인력이 전문분야에 집중할 수 있으며, 중복 투자를 막고 각 기관은 고유 업무에 역량을 집중할 수 있다. 비록 해양예보에 있어 우리나라가 현 단계로는 국제적인 수준에 뒤쳐져 있지만, 각 유관 기관들이 고유 업무를 정립하고 국가적인 역량을 집중하여 현업 해양예측시스템을 공동 개발하면 곧 추격하여 해양예보 분야를 선도할 수 있을 것이다.

• 한국학교보건학회지
• /
• 제12권2호
• /
• pp.207-215
• /
• 1999

The objectives of this study are to explain the use of media materials in school health education with other related factors in elementary, middle, and high schools in Korea. The data were collected by questionnaires from June to September in 1998. The number of subjects were 294 school nurses. The PC-SAS program was used for statistical analysis such as percent distribution, chi-squared test, spearman correlation test, and logistic regression. The use of media materials in health education has become extremely common. Unfortunately, much of the early materials were of poor production quality, reflected low levels of interest, and generally did little to enhance health education programming. A recent trend in media materials is a move away from the fact filled production to a more affective, process-oriented approach. There is an obvious need for health educators to use high-quality, polished productions in order to counteract the same levels of quality used by commercial agencies that often promote "unhealthy" lifestyles. Health educators need to be aware of the advantages and disadvantages of the various forms of media. Selecting media materials should be based on more than cost, availability, and personal preference. Selection should be based on the goal of achieving behavioral objectives formulated before the review process begins. The decision to use no media materials rather than something of dubious quality usually be the right decision. Poor-quality, outdated, or boring materials will usually have a detrimental effect on the presentation. Media materials should be viewed as vehicles to enhance learning, not products that will stand in isolation. Process of materials is an essential part of the educational process. The major results were as follows : 1. The elementary schools used the materials more frequently. But the production rate of media materials was not enough. The budget was too small for a wide use of media materials in school health education. These findings suggest that all schools have to increase the budget of health education programs. 2. Computers offer an incredibly diverse set of possibilities for use in health education, ranging from complicated statistical analysis to elementary-school-level health education games. But the use rate of this material was not high. The development of related software is essential. Health educators would be well advised to develop a basic operating knowledge of media equipment. 3. In this study, the most effective materials were films in elementary school and videotapes in middle and high school. Film tends to be a more emotive medium than videotape. The difficulties of media selection involved the small amount of extant educational materials. Media selection is a multifaceted process and should be based on a combination of sound principles. 4. The review of material use following student levels showed that the more the contents were various, the more the use rate was high. 5. Health education videotapes and overhead projectors proved the most plentiful and widest media tools. The information depicted was more likely to be current. As a means to display both text and graphic information, this instructional medium has proven to be both effective and enduring. 6. An analysis of how effective the quality of school nurse and school use of media materials shows a result that is not complete (p=0.1113). But, the budget of health education is a significant variable. The increase of the budget therefore is essential to effective use of media materials. From these results it is recommended that various media materials be developed and be wide used.

• 대한간호
• /
• 제36권1호
• /
• pp.108-117
• /
• 1997

This study was carried out to examine the standards for evaluation of laboratory facilities and equipment. These constitute the most important yet vulnerable area of our system of higher education among the six school evaluation categories provided by the Korean Council for University Education. To obtain data on the present situation of holdings and management of laboratory facilities and equipment at nursing schools in Korea, questionnaires were prepared by members of a special committee of the Korea Nursing Education Society on the basis of the Standards for University Laboratory Facilities and Equipment issued by the Ministry of Education. The questionnaires were sent to nursing schools across the nation by mail on October 4, 1995. 39 institutions completed and returned the questionnaires by mail by December 31 of the same year. The results of the analysis of the survey were as follows: 1. The Physical Environment of Laboratories According to the results of investigation of 14 nursing departments at four-year colleges, laboratories vary in size ranging from 24 to 274.91 pyeong ($1{\;}pyeong{\;}={\;}3.3m^2).$. The average number of students in a laboratory class was 46.93 at four-year colleges, while the number ranged from 40 to 240 in junior colleges. The average floor space of laboratories at junior colleges, however, was almost the same as those, of laboratories at four-year colleges. 2. The Actual State of Laboratory Facilities and Equipment Laboratory equipment possessed by nursing schools at colleges and universities showed a very wide distribution by type, but most of it does not meet government standards according to applicable regulations while some types of equipment are in excess supply. The same is true of junior colleges. where laboratory equipment should meet a different set of government standards specifically established for junior colleges. Closer investigation is called for with regard to those types of equipment which are in short supply in more than 80 percent of colleges and universities. As for the types of equipment in excess supply, investigation should be carried out to determine whether they are really needed in large quantities or should be installed. In many cases, it would appear that unnecessary equipment is procured, even if it is already obsolete, merely for the sake of holding a seemingly impressive armamentarium. 3. Basic Science Laboratory Equipment Among the 39 institutions, five four-year colleges were found to possess equipment for basic science. Only one type of essential equipment, tele-thermometers, and only two types of recommended equipment, rotators and dip chambers, were installed in sufficient numbers to meet the standards. All junior colleges failed to meet the standards in all of equipment categories. Overall, nursing schools at all of the various institutions were found to be below per in terms of laboratory equipment. 4. Required Equipment In response to the question concerning which type of equipment was most needed and not currently in possession, cardiopulmonary resuscitation (CPR) machines and electrocardiogram (ECG) monitors topped the list with four respondents each, followed by measuring equipment. 5. Management of Laboratory Equipment According to the survey, the professors in charge of clinical training and teaching assistants are responsible for management of the laboratory at nursing schools at all colleges and universities, whereas the chief of the general affairs section or chairman of the nursing department manages the laboratory at junior colleges. This suggests that the administrative systems are more or less different. According to the above results, laboratory training could be defined as a process by which nursing students pick up many of the nursing skills necessary to become fully qualified nurses. Laboratory training should therefore be carefully planned to provide students with high levels of hands-on experience so that they can effectively handle problems and emergencies in actual situations. All nursing students should therefore be thoroughly drilled and given as much on-the-job experience as possible. In this regard, there is clearly a need to update the equipment criteria as demanded by society's present situation rather than just filling laboratory equipment quotas according to the current criteria.

• 한국의상디자인학회지
• /
• 제7권3호
• /
• pp.113-127
• /
• 2005

From the ancient times, incense was used for various usages including a means of beauty expression with flavor, a medicine for disease treatment and a device for religious event or ritual. The period of T'ang was the times when cultural and material exchanges with foreign countries were very actively made under the political openness of the Chinese nation. Here the exchanges were made mainly through inland trade, called Silk Road(絲綢之路) and marine trade routes, Incense Road(香料之路). This indicates that incense was one of the main items actively traded at that time. In addition, literatures of the T'ang period show that in the Chinese nation, a wide range of classes from the imperial family to the public used incense for many different purposes. This suggests that the culture of incense was deeply prevailed and very socially significant in T'ang. This study investigated social factors that promoted the incense culture of T'ang and the applications and types of incense widely used in the period of T'ang. First, influential religions and the openness of sex culture were main social factors that made incense culture flourish in the period of T'ang. Above all, two main religions of the Chinese nation, Buddhism and Taoism became secularized under political protection by the imperial family. As Buddhism was popularized, the Buddhist ritual of incense burning made a contribution to making public incense culture. Providing its doctrines of eternal youth and eternal life, Taoism necessarily used incense to form a Taoistic climate. The flourishment of the foresaid religion in T'ang added more fuel to that of incense culture in the Chinese nation. The openness of sex culture brought about the Inauguration of the empress, improvement in female position and free relationships between man and woman. It was accelerated by sexology as a method of eternal youth provided by Taoism. The opened culture also developed the culture of kibang where female entertainers called kinyeo consumed lots of incense for decoration and sexual desire stimulation. These open climates of T'ang society made a great contribution to making incense culture, especially for decoration, prevailed throughout the Chinese nation. Second, types of incense prevailed and widely used in the period of T'ang included olive incense, germander(廣藿香), olibnum(乳香), myrrh Resinoid(沒藥), jia Xiang(甲香), clove(丁香) and Shen xian(沈香), all of which were imported from foreign nations and had various applications. Specifically, olive incense, germander(廣藿香), olibnum(乳香) and myrrh Resinoid(沒藥) were used for religious purposes while, jia Xiang(甲香), clove(丁香) and Shen xian(沈香) for the purposes of religion and decoration. In conclusion, a number of social factors including political, religious and medical purposes and the openness of sex culture set fundamentals on which the culture of incense was extensively developed and established as a social trend in T'ang. In the Chinese nation, incense culture was not just an option for taste, but a part of life style social members needed to know. People of T'ang not only enjoyed incense mainly for purposes of religion, pleasure and make-up, but also had the wisdom to know various effects of incense, curiosity about such new things and the will to imitate and pursue alien culture, resultantly flourishing incense culture. Thus the culture of incense represented many social aspects of T'ang.

• 시큐리티연구
• /
• 제37호
• /
• pp.325-354
• /
• 2013

국가안보의 개념과 위기관리의 기본시스템이 전통적 방식을 탈피하여 국가핵심기반위기관리의 중요성이 강조되고 있다. 국가핵심기반위기는 테러, 대규모 재난 등의 원인에 의해 국민의 안위, 국가 경제, 사회의 생명력과 일체성 및 정부의 핵심기능에 중대한 영향을 미칠 수 있는 인적 물적 기능적 체계가 마비되는 상황을 의미한다. 북한은 1960년대부터 지속적으로 핵무기를 개발하여 수차에 거쳐 협상과 제재를 받아왔지만, 핵실험과 미사일 발사 실험의 성공을 통해 핵무장을 과시한 바 있다. 본 연구는 북한의 대량살상무기의 개발과 위협이 가시화되고 그 위험 범위가 확대됨에 따라 국가적 위기대처에 핵심적인 역할과 기능을 수행해야 할 국가지도부가 북한의 우발적인 초기공격에 초토화됨으로써 국가위기관리의 지도력에 공백이 발생할 수 있다는 점에 주목하였다. 이에 따라 대량살상무기인 핵무기를 중심으로 그 개념과 위협의 정도를 고찰하고 북한 핵무기의 위협의 실체를 분석하고 평가하였으며, 북한의 핵무기 위협에 대비한 국가지도부의 안전대책을 제시하고자 하였다. 결론은 첫째 국가적 위기 시 국가위기관리시스템의 정상적인 작동을 위한 헌법적 행정부 유지(Enduring Constitutional Government, ECG), 업무연속성 확보(Continuity Of Operations, COOP)를 위한 국가위기관리지도부의 범위와 승계순위에 따른 안전대책을 강구하여야 한다. 둘째는 국가적 행사시 국가지도부가 공개된 장소에 모두 집합하는 경우를 지양해야 한다. 불가피한 경우 차 상위 대행권자를 지정하여 보호조치를 취하여야 한다. 셋째는 평시 국가적 위기시를 대비한 국가지도부 보호를 위한 범위를 규정하고 구체적인 경호안전대책을 시행하여야 한다. 넷째는 우리나라 정부조직법 제71조와 제26조 1항의 대통령 유고시 직무대행 승계 순위가 북한의 대량살상무기인 핵무기의 위협에 상응한 국가위기관리를 고려한 합리적인 규정인지를 재검토해야 한다 등이다. 정부는 대통령훈령 제229호 국가위기관리 기본지침에 따라 유형별 '위기관리 표준매뉴얼'과 하위 실무매뉴얼을 운영하고 있으며, 대통령경호실의 대통령 권한대행에 대한 경호 안전업무관련 규정을 가지고 있다. 따라서 정부는 유형별 위기관리 표준매뉴얼, 대통령 권한대행의 경호안전업무관련 규정에 이를 구체화하여 시행되도록 법제화하여야 한다.

• 한국초지조사료학회지
• /
• 제29권1호
• /
• pp.7-12
• /
• 2009

본 시험은 우리나라 논에서 적응성이 우수한 forage pea 품종을 선발코자 2004년부터 2006까지 전라남도농업기술원 답리작 포장에서 공시 초종은 자운영 1품종(중국 자생품종)과 forage pea 2품종(cv, 'Austrian Pea', 'Livioletta')이었고 파종량은 120kg/ha으로 수행하였으며, 그 결과는 다음과 같다. 개화기는 Livioletta 품종이 5월 16일로 빠르고 Austrian Pea품종이 5월 18일로 2일정도 늦었고 월동율은 Austrian Pea 품종이 Livioletta 품종보다 떨어졌다. Austrian pea 품종의 건물률은 20.9% 보다 높았고 ha당 생초수장은 Austrian Pea 품종이 26,870kg으로 많았고 Livioletta 품종이 약 16,235kg/ha로 적었다. 그리고 건물수량에 있어서는 Austrian Pea 품종이 5,986kg/ha으로 Livioletta 품종의 3,652kg/ha보다 훨씬 많은 수량을 얻었고 조단백질 수량에 있어서도 Austrian Pea 품종이 861 kg/ha로 많이 생산되었다. Austrian Pea 품종의 조단백질 함량은 14.4%으로 Livioletta 품종의 15.5%보다 약간 낮았고 건물소화율은 Austrian Pea 품종의 74.3%이 Livioletta 품종의 61.3% 보다 높았다. 그리고 TDN 함량도 Austrian pea 품종의 70.4%이 Livioletta 품종의 62.6% 보다 높은 결과를 얻었다. 따라서 본 연구에서는 우리나라 논에서 적응성, 조단백질 함량과 건물 생산성 등을 고려한 결과 forage pea 초종이 조사료공급원 작물로 전망이 있고 품종도 Austrian Pea 품종이 우리나라 논에서 적응성이 우수한 품종으로 사료된다.

• 과학기술학연구
• /
• 제8권1호
• /
• pp.97-129
• /
• 2008

새로운 기술의 개발과 확산으로 인해 기술 위험의 가능성과 영향이 크게 증가하고 있다. 불확실성을 기본적 속성으로 하는 위험의 특성상 지식의 불확실성 해소는 기술 위험관리의 핵심적 요소라고 할 수 있다. 지식의 불확실성이 기술위험 갈등의 중요한 원인이 되기 때문이다. 그러나 지식 축적만으로 기술위험 갈등이 해소되는 것은 아니다. 기술위험의 성격에 따라서는 기술위험에 대한 합의의 부족이 갈등의 주원인이 될 수 있기 때문이다. 휴대전화 전자파의 인체 유해성 논란은 대표적인 예라고 할 수 있다. 휴대전화 전자파의 인체 유해성 여부에 대해서는 명확한 결론을 내릴 수는 없지만 관련 지식이 꾸준히 축적되어 왔기 때문에 지식의 불확실성은 높지 않다. 산업계는 유해성을 입증할만한 뚜렷한 증거가 없기 때문에 법적 규제는 불필요하다는 입장인 반면 시민단체들은 유해 가능성이 입증되지 않았지만 가능성은 여전히 남아있기 때문에 사전 예방적 차원의 규제가 필요하다는 입장을 취하고 있다. 우리나라의 경우 시민단체의 지속적인 문제제기에 따라 정부는 인체흡수율(SAR) 기준을 설정하고 인체 흡수율 정보를 공개토록 하고 있다. 그러나 시민단체의 입장에서 보면 인체 흡수율 기준은 전신이 아닌 얼굴 부위에만 적용되는 제한적 기준이며, 인체 흡수율 정보도 자율적으로 공개토록 하고 있다는 점에서 완화된 형식적 규제라고 할 수 있다. 예방적 규제를 지지하는 시민단체와 산업계 보호의 관점에서 완화된 규제를 유지하려는 정부간에는 여전히 큰 인식 차이가 존재한다. 휴대전화 전자파의 기술 위험은 기술의 친숙성으로 인해 심각한 위험으로 받아들여지지 않고 있지만 심각한 갈등과 재난을 초래할 가능성도 있다. 따라서 이러한 문제를 예방하기 위해서는 안전의 목표를 경제적 목표와 통합하는 정책 통합과 위험 커뮤니케이션의 촉진을 통해 갈등 가능성과 재난의 발생의 소지를 차단하는 기술위험 관리가 필요하다.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.