• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.29.1-29.1
• /
• 2008

The temperature control system which is using liquid and gaseous nitrogen has been known as the most economical system to simulate space temperature condition due to relatively not expansive price of the liquid nitrogen (less than 0.2 USD per liter). And, among these systems, the closed loop system which circulates compressed nitrogen gas come from sprayed liquid nitrogen by blower and makes a target temperature with heat from an electrical heater and flow rate of liquid nitrogen is prevail all over the world. But, this complete closed loop system requires expansive equipments such as blower, heater, and liquid nitrogen injector, and special maintenance on the system. Therefore, KARI is developing efficient and simple open loop system which utilizes liquid and gaseous nitrogen with eliminating a special blower and other expansive units. In this study, this open loop system with more efficiency and flexibility will be designed and introduced.

• 전기의세계
• /
• 제28권5호
• /
• pp.44-48
• /
• 1979

For ordinary systems the receding horizon method has beer proved by the author as a very useful and easy tool to find stable feedback controls. In this paper an open-loop optimal control which minimizes the control energy with a suitable upper limit and terminal control and state constraints is derived and then transformed to the closed-loop control. The stable feedback control law is obtained from the closed-loop control. The stable feedback control law is obtained from the closed-loop control by the receding horizon concept. It is shown by the Lyapunov method that the control law derived from the receding, horizon concept is asymtotically stable under the complete controllability condition. The stable feedback control which is similar to but more general than the receding horizon control is presented in this paper To the author's knowledge the control laws in this paper are easiest to stabilize systems with delay in control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.466-469
• /
• 2001

In this paper, closed loop V/f control of induction motor has been implemented by the estimated speed. Closed loop V/f control improve the performance of induction motor drive system at low speed compared to open loop V/f control. However, closed loop V/f control need speed sensor. By using the estimated speed, closed loop V/f control is possible without speed sensor. Rotor speed is calculated from the difference between synchronous frequency and slip angular frequency. 3-phase voltage reference is obtained from synchronous frequency. And the PWM technique using space vector PWM is applied in this scheme. In the space vector PWM, effective time of 3-phase voltage reference is used to simplify the calculation of effective voltage time. This scheme is simple to implement and one chip microprocessor was used in experimental system.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.135-140
• /
• 2010

항공기 조종면의 시간당 변화율 한계에 의한 PIO 현상을 해석하는 기법으로 Open-Loop-Onset-Point (OLOP) 방법이 널리 이용된다. OLOP은 조종면의 변화율 한계에 의한 PIO 현상을 주원인으로 포함하고 더 나아가 조종면 구동기의 변위한계도 고려하는 데, 여기서는 이 변위 한계를 고려하는 새로운 방법을 제시하고자 한다. 새로운 기법은 독립된 구동기의 주파수 응답을 고려할 때, 기존의 OLOP 방법이 제시한 바와 달리, 변화율 한계가 시작되는 주파수가 변위 한계에 의해 더 높은 주파수로 지연되지 않는다는 사실을 인지함으로써 그 동기가 되었다. 실제로 피드백 제어 환경에서는 변화율 한계의 시작점이 오히려 더 낮은 주파수에서 일어나는데, 이는 변위 한계의 영향에 의한 제어력 감소분을 극복하기위해 제어기가 더 큰 제어 입력을 발생하기 때문이다. 본 연구는 이렇게 찾아진 변화율 시작 주파수와 변위 한계를 고려하여 OLOP 해석의 최종 단계에서 Nichols Chart 위에 변화율 시작점을 찾는 새로운 방법을 제시한다. 마지막으로 기존의 방법으로는 PIO 예측에 있어서 위험한 판단에 도달할 수 있으나, 제시된 새로운 방법으로는 올바른 예측을 할 수 있음을 보여준다.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.900-906
• /
• 2010

This note proposes vibration-free motor control through modified LQG/LTR methodology. A conventional LQG/LTR method is a design tool in the frequency domain. However, unlike the conventional one, the proposed one is a time response based design method. This feature is firstly designed by parameterized settling time control gain through the target loop design procedure and the feature is secondly realized by loop transfer recovery. In order to show convergence to the target loop transfer functions, asymptotic behaviors of the open and the closed loop transfer functions are shown. At the conclusion, it is verified that the proposed method is robustly stable to parametric uncertainties through ${\mu}$-plot.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.547-555
• /
• 2002

This paper proposes a stabilizing controller for the multirate sampled-data systems, which have a periodic output measurement scheme, in case of the open-loop unstable plant. A sufficient condition for maintaining observability in the multirate sampled-data systems is derived and a design strategy for filtered disturbance rejection is proposed. We also propose a design method for the plant output estimator. It is shown that the proposed pre-stabilizing controllers can stabilize the plant through the simulations. The proposed controller has IMC structure, and can be decomposed into the pre-stabilizing controller, the plant output estimator, the filtered disturbance estimator and the inverse of the fast pre-stabilized plant model. We assume that the plant is open-loop unstable and the disturbance consists of a sum of finite number of sinusoids with different frequencies. Some examples are presented for illustrations.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.883-888
• /
• 1999

To obtain high positioning auccuracy for a long, flex bleman Ipulator, residual vibration must be removed from the tip motion. But it is difficult to control the vibration of low frequency. There are open-loop and closed loop methods in the elimination of the residual vibration. We inroduce input shaping technique has been used as a simple open-loop method of controlling the residual vibration of a flexible manipulator. Design of input shaper in the continuous time domain is complicated. This paper presents a new technique that designs input shaper in the z-domain and analyzes input shaping method in the z-domain. This technique is simple and easy to design input shaper.

• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.1-9
• /
• 2017

This research develops dispatching rule for a wafer FABs with dedication constraints. Dedication, mostly considered in a photolithography step, is a feature in a modern FABs in order to increase the yield of machines and achieve the advance of manufacturing technology. However, the dedication has the critical problem because it causes dedication load of machines to unbalance. In this paper, we proposes the dedication load based dispatching rule for load balancing in order to resolve the problem. The objective of this paper is to balance dedication load of photo machines in wafer FABs with dedication constraint. Simulation experiments show that the proposed rule improves the performance of wafer FABs as well as load balance for dedication machines compared to open-loop control based conventional dispatching rule.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.50-52
• /
• 1995

This paper deals with the dynamic characteristics of LIM which is controlled by constant V/f ratio and the characteristics of the Inverter acted as interface between the utility power system and LIM. Though open-loop control method is less reliable than closed-loop control method, it's commonly used because it is simple and cheap. This paper shows the consideration for dynamic characteristics of LIM under open-loop control and for Inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.109-112
• /
• 1989

Gun system operation is represented as a first-order Markov process, and an optimum linear filter is derived for closed-loop control of mean square error. Potential improvement is then estimated by contrasting the variance in performance and the auto correlation for open-loop system with that for the optimum linearly corrected process.