• 한국터널지하공간학회 논문집
• /
• 제11권4호
• /
• pp.419-425
• /
• 2009

최근에 저토피 및 터널 갱구부에 반개착식 공법을 적용하여 구조적인 안전성과 자연친화성을 높인 사례가 증가하고 있다. 반개착식 공법은 저토피구판에시 원지반을 터널 천단아치에 해당하는 기초까지만 굴착하고 아치형 구조달을 설치하여 복토한 후에 터널하반을 굴착하여 기존 개착공법에서 발생되는 지반 과다절취에 따른 대절토 비탈면 발생과 굴착면 보강에 따른 고비용과 불안정성 증대 문제를 해결할 수 있는 공법이다. 본 논문에서는 저토피 구간에서 반개착식으로 굴착한 Braced Rib Arch의 거동에 대하여 연구하였다. 아치형구조물의 Rib Arch는 지간이 1.8 m인 아치형 강재를 간격재는 목재를 사용하였으며 1:10의 축척으로 4.0 m(폭)$\times$3.3 m(높이)$\times$4.0 m(연장)의 크기를 가진 대형토조에서 실험을 수행하였다. 모형실험결과 아치형 구조물에 작용하는 성토하중은 기존 개착터널에서 사용하는 하부구조물의 폭에 해당하는 상부토체의 크기보다 작은 것으로 나타났다.

• 화약ㆍ발파
• /
• 제17권2호
• /
• pp.45-51
• /
• 1999

본 연구에서는 Dust Fall Sample을 설치하여 한라시멘트 옥계 채광현장의 천공, 발파작업시 발생되는 분진을 측정하고, 실험적인 방법으로 100m길이의 가설 풍동을 만들어 풍속별 비산거리 및 분진입도 분포 등을 파악하여 주변작업 환경영향을 평가하였다. 그 결과 낙진량은 기본적으로 분진원으로부터 거리가 멀어질 수록 현저하게 감소하며, 같은 조건일 때는 풍속이 빠를수록 낙진량도 증가하였다. 또한 석회석 노천채광시 발파작업장으로부터 100m 내외의 주변 지표상의 낙진량은 아주 작은량임을 알 수 있었다.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.29-38
• /
• 2018

It is the approach of embedded system design that analyzes COS(Cut Out Switch) failure in the power distribution and an instantaneous breakdown of power distribution supply could cause the weakness of industrial competence and therefore we need to feed the stable power distribution with developing the technology of open-source embedded system. In this paper, we apply the LoRa technology which is the Internet of Things(IoT) protocol for low data rate, low power, low cost and long range sensor applications. We designed the hardware and software architecture setup and experimented the embedded system with network architecture and COS monitoring system including accelerometer for detecting the failure of distribution line and sensing the failure of its fuse holder by recognizing the variation and collision and afterwards sending the information to a gateway. With experimenting we designed the embedded platform for sensing the variation and collision according to the COS failure, monitoring its fuse holder status and transferring the information of states with LoRa technology.

• ETRI Journal
• /
• 제19권2호
• /
• pp.48-58
• /
• 1997

Using high quality high-$T_c$ superconducting (HTS) YBCO thin films, we designed and fabricated 3-pole, 5-pole, and 7-pole lowpass filters consisting of microstrip transmission lines and open-stub lines. We measured the microwave response of the filters in the temperature range of T=85 K to 27 K. AtT=30 K, the observed inband insertion loss was 0.14dB and 0.02dB for the 5-pole and 7-pole filters, respectively. The cut-off frequency was 4.7 GHz for the 5-pole filter and 7.9GHz for the 7-pole filter. To the authors' knowledge, the measured inband insertion losses are the best values reported so far for the open-stub line type HTS multipole lowpass filters. The skirt property of the 5-pole filter showed a large improvement over that of the 3-pole filter as predicted from the simulation. We found that, to obtain a stable performance, the HTS multipole lowpass filters should be operated at the temperatures between 60% and 70% of $T_c$.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제8권2호
• /
• pp.75-86
• /
• 2004

In this study, a recursive algorithm for generating the equations of motion of a chain of rigid rods is presented. The methods rests upon the idea of replacing the rigid body by a dynamically equivalent constrained system of particles. The concepts of linear and angular momentums are used to generate the rigid body equations of motion without either introducing any rotational coordinates or the corresponding transformation matrices. For open-chain, the equations of motion are generated recursively along the serial chains. For closed-chain, the system is transformed to open-chain by cutting suitable kinematic joints with the addition of cut-joints kinematic constraints. An example of a closed-chain of rigid rods is chosen to demonstrate the generality and simplicity of the proposed method.

• Agricultural and Biosystems Engineering
• /
• 제6권1호
• /
• pp.15-21
• /
• 2005

This study was conducted to develop a nondestructive grouping system for soil organic matter using visible (VIS) and near infrared (NIR) spectroscopic method. The artificial light was irradiated on the cut soil surface at 15 to 20 cm depths to reduce the errors of light at open field. The reflectance energy from the cut soil surface was measured to group the soil organic matter using VIS/NIR light sensor with narrow band pass filter. From reflectance spectra of soil samples, the sensitive wavelengths for measuring the soil organic matter were selected and compared to previous research results. The grouping system for soil organic matter consisted of light sensor with band pass filter measuring the reflectance energy of the cut soil surface, global positing system (GPS), analog-to-digital (AD) converter, computer and operating software. The regression models to predict the soil organic matter were developed and evaluated. From field test, the accuracies of the developed light sensor system were 81.3% for five-stage grouping of the soil organic matters and 91.0% for three-stages grouping of the soil organic matters, respectively. It could be possible to support the decision making for variable rate applications with the developed grouping system for soil organic matter in precision agriculture.

• 대한전기학회논문지
• /
• 제33권8호
• /
• pp.299-309
• /
• 1984

This paper proposes the adapter for interrupting capacity augmentation of circuit breaker which can be applied in case of shortage in a existing circuit breaker's interrupting capacity due to utility system extension. The adapter utilizes two winding type of reactor instead of single winding type of reactor and the control of 2ry circuit is excuted by a triac interlocked with the system protective relays actuation so as to cut out the reactor by short circuit of the 2ry winding in normal situation and to cut in the reactor by open circuit of the 2ry winding in abnomal situation such as short circuit accident. As a result of the theoritical analysis and experiment, it is proved that the adaptor can reduce the voltage crop and iron loss due to the reactor signigicantly in normal system condition and do a role of reactor upon the power system accident.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-424
• /
• 2001

TCV(Temperature control valve by pressure compensation) controls temperature constantly, when it is sending steam or high temperature water to heating device of heat exchanger. For designing TCV, the ratio of piston and hole diameters is one of the important design parameters. Numerical analysis is carried out to elucidate the flow characteristics in the TCV with different port areas of cold and hot waters, using the k-$\epsilon$ turbulence model and Cartesian cut-cell method. Numerical results show that the exit flow rate is mainly affected by pressure distribution in the piston.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.193-202
• /
• 2004

This paper presents a computer method for the dynamic analysis of a system of rigid bodies in plane motion. The formulation rests upon the idea of replacing a rigid body by a dynamically equivalent constrained system of particles. Newton's second law is applied to study the motion of the resulting system of particles without introducing any rotational coordinates. A velocity transformation is used to transform the equations of motion to a reduced set. For an open-chain, this process automatically eliminates all of the non-working constraint forces and leads to an efficient integration of the equations of motion. For a closed-chain, suitable joints should be cut and few cut-joints constraint equations should be included. An example of a closed-chain is used to demonstrate the generality and efficiency of the proposed method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1132-1137
• /
• 2010

There are execute of new laws about prevent of earthquake diaster in nation because of some increments of big earthquake occurence frequency. Now develope new composit plate by ductile fiber with strong mechanic materials, which compose of strengthening systems for the underground structures subject to forced displacements. This study is to focus to develop the retrofitting system for the cut and cuver tunnels built without earthquake type load scenario, so that it can provide the safety of existing urban subway system against earthquakes.