• Korean Journal of Mathematics
• /
• 제18권4호
• /
• pp.489-496
• /
• 2010

In this paper we consider the Dirichlet problem for an fourth order elliptic equation on a open set in $R^N$. By using variational methods we obtain the multiplicity of nontrivial weak solutions for the fourth order elliptic equation.

• Korea-Australia Rheology Journal
• /
• 제12권3_4호
• /
• pp.165-173
• /
• 2000

Three-dimensional numerical simulation of isothermal/nonisothermal coextrusion process of two immiscible polymers through a rectangular channel has been done using the finite element method. The encapsulation phenomenon with the less viscous layer encapsulating the more viscous layer was investigated with the generalized Newtonian fluids. The interface position around the symmetric plane obtained by numerical simulation nearly coincided with the one observed in experiments, but the degree of encapsulation was less than the one observed experimentally. Open boundary condition method was found to be applied to the simulation of nonisothermal coextrusion process, however, the results are not far from those using the fully developed boundary condition, because the temperature development along the downstream direction is very slow in the case of convection dominated flow. When the inlet velocity is increased, the interface profile does not change in isothermal flow, while it moves upward in nonisothermal situation. The degree of encapsulation decreases along the downstream direction in nonisothermal flow. When the inlet temperature increases compared to the wall temperature, the outlet interface moves downward and the degree of encapsulation increases. The difference of degree of encapsulation between the simulation and the experiments seems to arise from the viscoelastic effect of the materials. It was concluded that the nonisothermal effect alone does not explain the complex coextrusion process and the viscoelastic effect needs to be considered.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.433-433
• /
• 2021

본 연구는 개수로 흐름에서 조류발전단지의 터빈 최적 배열의 거시적 특성에 관한 연구를 수행하였다. 천수방정식을 통해 직사각형 개수로의 흐름장을 해석하였고, 상류와 하류단에 대해 각각 유입경계조건(inlet boundary condition)과 Flather 형식의 개방경계조건(open boundary condition)을 부여하여 일정 유량으로 흐르는 개수로 흐름을 구현하였다. 더불어, Strickler의 법칙을 확장한 반력공식을 연계하여, 개수로 흐름에 대한 조류 터빈의 영향을 반영하였다. 주어진 상류의 흐름 조건에 대해 조류발전량을 최대로 하는 최적 배열을 구하기 위해 터빈 반력모형을 연계한 천수방정식, 터빈간 최소간격, 그리고 발전단지영역을 제한조건으로 하는 발전량 최대화 문제를 구성하였다. 여기서 조류 터빈의 위치를 나타내는 벡터를 설계변수로 두었는데, 설계되는 터빈의 수가 증가함에 따라 최적화 문제의 계산량이 증가하지 않도록 수반법(adjoint method)을 경사도기반법(gradient-based method)에 연계한 방법이 이용되었다. 다수의 터빈초기배치로 상당한 수치실험이 수행되었고, 발전량 최대화를 이루도록 최적화된 터빈의 배치들이 큰 규모에서 고유한 형상으로 수렴함을 확인하였다. 이러한 특성은 발전단지의 너비와 터빈의 최소간격의 함수로 정의된 무차원수 E를 바탕으로 설명되었다. 구체적으로, E가 1보다 작을 때에는 선형배열이 최적배열로 나타났고, E가 1을 넘어 점차 커짐에 따라 하류에 오목한 형상을 보이다가 V-형태로 발전하는 양상을 보였다. 또한, 어느 임계 수 이상의 터빈이 배치되는 경우 일열 배열을 유지하지 못하고 이열 배열로 분리됨이 관찰되었다.

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.123-128
• /
• 2016

프로펠러 표면의 생물 부착이 프로펠러 성능에 상당한 영향을 미치지만 프로펠러 표면 거칠기와 관련된 연구는 상대적으로 선체 표면에 비하여 많지 않다. 본 연구에서는 Schultz(2007)가 발표한 Granville's similarity-law scaling 절차에 기초하여 실선 7 m 크기의 탱커 프로펠러에 표면 부착물 상태가 서로 다른 3가지 경우를 고려하여 프로펠러 단독 효율의 감소의 변화를 Lifting surface code를 사용하여 수치적 계산을 수행하여 효율을 비교하였다. 본 논문에서의 결과는 표면 거칠기가 큰 석회질 부착물($k_s=0.001$)은 선박 설계 속도(J=0.5)에서 최대 15 %의 프로펠러 효율 감소를 보였음을 확인하였으며 이는 선박 운항 시 생물 부착에 의한 효율 감소에 대한 평가가 고려되어야 한다는 점을 나타내고 있다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.1974-1987
• /
• 2023

The load-following operation of small modular reactors (SMRs) requires accurate prediction of transient behaviors that can occur in the balance of plants (BOP) and the nuclear steam supply system (NSSS). However, 1-D thermal-hydraulics analysis codes developed for safety and performance analysis have conventionally excluded the BOP from the simulation by assuming ideal boundary conditions for the main steam and feed water (MS/FW) systems, i.e., an open loop. In this study, we introduced a lumped model of BOP fluid system and coupled it with NSSS without any ideal boundary conditions, i.e., in a closed loop. Various methods for coupling boundary conditions at MS/FW were tested to validate their combination in terms of minimizing numerical instability, which mainly arises from the coupled boundaries. The method exhibiting the best performance was selected and applied to a transient simulation of an integrated NSSS and BOP system of a SMART. For a transient event with core power change of 100-20-100%, the simulation exhibited numerical stability throughout the system without any significant perturbation of thermal-hydraulic parameters. Thus, the introduced boundary-condition coupling method and BOP fluid system model can expectedly be employed for the transient simulation and performance analysis of SMRs requiring daily load-following operations.

• 한국지반공학회논문집
• /
• 제22권9호
• /
• pp.37-43
• /
• 2006

지반구조물의 동적해석은 모델의 영역이 커짐에 따라 에너지가 감소하는 현상을 표현할 수 있는 방법을 필요로 한다. 이러한 현상은 흔히 방사 감쇠(radiation damping) 또는 기하학적 감쇠(geometric attenuation)로 알려져 있으며, 탄성에너지가 점성 또는 이력현상에 의해 감소되는 재료 감쇠현상과는 구별된다. 따라서 수치해석으로 지반구조물의 동적거동을 해석할 경우 모델의 영역 구축은 특별한 고려를 필요로 한다. 인공적인 경계조건은 유한요소내의 지반상태를 무한상태로 변형시킬 수 있어야 하며, 경계에 도달하는 응력 파동을 모델내로 반사시키지 않고 흡수 할 수 있어야 한다. 본 논문에서는 간단한 점 탄성 반무한 불연속 요소를 이용하여 지반구조물의 동적해석을 수행할 경우 에너지를 투과하는 경계조건을 수립하는 방법을 보여준다. 반무한 요소의 실행은 OpenSees라는 유한요소 해석프로그램을 이용하여 수행되었으며, 예를 통하여 불연속 요소가 경계에 도달하는 응력 파동을 충분히 흡수하여 유한요소 모델을 반무한 상태로 전환 시킬 수 있다는 것을 보여준다. 본 논문에서 제시된 방법은 간단하게 실용적으로 사용할 수 있는 반무한 경계조건이지만, 입사각이 매우 예리할 경우는 에너지의 흡수정도가 충분치 않은 것으로 알려져 있다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.232-239
• /
• 1999

Generally quantity of supply oil for piston ring lubrication in an internal combustion engine may be insufficient to fill the entire volume formed in the clearance between piston ring and cylinder liner. Thus oil starvation condition should be considered for the analysis of piston ring lubrication. In order to reasonably estimate amount of oil left on the cylinder liner, adequate boundary condition should be adapted for the analysis of ring pack lubrication. In this analysis of ring pack lubrication of an internal combustion engine, oil starvation and open-end boundary conditions are considered at inlet and outlet of piston rings. It is revealed that piston rings are operated under oil starvation in most operating cycle and the result with these conditions are quite different from that with fully-flooded assumption.

• Tribology and Lubricants
• /
• 제15권3호
• /
• pp.233-239
• /
• 1999

Generally quantity of supply oil for piston ring lubrication in an internal combustion engine may be insufficient to fill the entire volume formed in the clearance between piston ring and cylinder liner. Thus oil starvation condition should be considered for the analysis of piston ring lubrication. In order to reasonably estimate amount of oil left on the cylinder liner, adequate boundary condition should be adapted for the analysis of ring pack lubrication. In this analysis of ring pack lubrication of an internal combustion engine, oil starvation and open-end boundary conditions are considered at inlet and outlet of piston rings. It is revealed that piston rings are operated under oil starvation in most operating cycle and the result with these conditions are quite different from that with fully-flooded assumption.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.51-58
• /
• 1998

This paper considers analysis of the lubrication between the piston ring and the cylinder liner. Piston ring lubrication analysis considering oil transport is important because oil consumption is an essential factor to design the piston assembly. To develop the lubrication analysis program for the piston ring, oil continuity condition and open-end boundary assumption are used for computational boundaries. Results show that oil continuity can be almost satisfied at any crank angle in and out of the piston ring clearance. Therefore the amount of oil consumption and the dynamic behavior of ring pack can be estimated using this algorithm. And it can be known that the effective width may be smaller than the full width of the piston ring, so oil starvation condition should be considered for the lubrication analysis of the piston ring.

• 농촌계획
• /
• 제18권1호
• /
• pp.17-28
• /
• 2012

Functional mismatch and thought and plan-less material use of recently built boundary barriers in rural areas should greatly degrade their amenity value as one of linear villagescapes, but, their present state-of-art basically necessary for problem-solving had never surveyed up to now. From this point of view, this study tried to investigate present stock quantities and qualities of boundary barriers in rural areas by sample studies on 21 case villages(7 types ${\times}$ 3 cases) and comparative analysis between the planned or improved and nots. Wall type was absolutely dominated in the structural terms, of which more than half was used cement block as building material and, therefore, grey-colored. More than half of total barrier length were fully shielded, while relatively partially shielded in the mountainous villages in open space and 'Cultural villages' with closed housing structures. Free standing style of barriers was shown along over two thirds of their total length, although not more than half in planned reclaimed villages. Especially, because of one-sided wall type structure, mismatched over-shieldness and poorer maintenance condition of the boundary barriers in peri-urban villages, there should be provided with very intensive improvement efforts for amenity barriers.