• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1096-1103
• /
• 1990

A finite element method is used for analyzing the resonant characteristics of three- dimensional wind tunnel with circular cross section. The resonant frequencies of wind tunnel is nearly constant in Mach number range of 0.0-0.2. The resonant frequencies and modes of three-dimensional low speed wind tunnel have been calculated. The 20-node isoparametric element gives accurate results compared with the experimental results.

• Journal of the Chungcheong Mathematical Society
• /
• v.21 no.2
• /
• pp.269-278
• /
• 2008

Let ${\partial}D$ be the boundary of the open unit disk D in the complex plane and $L^p({\partial}D)$ the class of all complex, Lebesgue measurable function f for which $\{\frac{1}{2\pi}{\int}_{-\pi}^{\pi}{\mid}f(\theta){\mid}^pd\theta\}^{1/p}<{\infty}$. Let P be the orthogonal projection from $L^p({\partial}D)$ onto ${\cap}_{n<0}$ ker $a_n$. For $f{\in}L^1({\partial}D)$, ${\hat{f}}(z)=\frac{1}{2\pi}{\int}_{-\pi}^{\pi}P_r(t-\theta)f(\theta)d{\theta}$ is the harmonic extension of f. Let ${\hat{P}}$ be the composition of P with the harmonic extension. In this paper, we will show that if $1, then ${\hat{P}}:L^p({\partial}D){\rightarrow}H^p(D)$ is bounded. In particular, we will show that ${\hat{P}}$ is unbounded on $L^{\infty}({\partial}D)$.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.9-18
• /
• 1996

The primary objective of this paper is to grasp many characteristics of buckling behavior of latticed spherical domes under various conditions. The Arc-Length Method proposed by E.Riks is used for the computation and evaluation of geometrically nonlinear fundamental equilibrium paths and bifurcation points. And the direction of the path after the bifurcation point is decided by means of Hosono's concept. Three different nonlinear stiffness matrices of the Slope-Deflection Method are derived for the system with rigid nodes and results of the numerical analysis are examined in regard in geometrical parameters such as slenderness ratio, half-open angle, boundary conditions, and various loading types. But in case of analytical model 2 (rigid node), the post-buckling path could not be surveyed because of Newton-Raphson iteration process being diversed on the critical point since many eigenvalues become zero simultaneously.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1286-1291
• /
• 2004

In order for studying pressure-coupled dynamic responses of droplet vaporization, open-loop experiment of an isolated droplet vaporization exposed to pressure perturbations in stagnant gaseous environment is numerically conducted. Governing equations are solved for flow parameters at gas and liquid phases separately and thermodynamic parameters at the interfacial boundary are matched for problem closure. For high-pressure effects, vapor-liquid interfacial thermodynamics is rigorously treated. A series of parametric calculations in terms of mean pressure level and wave frequencies are carried out employing a n-pentane droplet in stagnant gaseous nitrogen. Results show that wave instability in view of pressure-coupled vaporization response seems more susceptible at higher pressures and higher wave frequencies. Mass evaporation rate responding to pressure waves is amplified with increase in pressure due to substantial reduction in latent heat of vaporization. Augmentation of perturbation frequency also enhances amplification due to the reduction of phase differences between pressure perturbation and surface temperature fluctuation.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.4
• /
• pp.21-31
• /
• 1993

불규칙한 기하구조 및 기하학적 특이점들을 갖는 방사체에 의해 형성되는 음장을 예측하는 작업은 매우 어려운 일이다. 이러한 종류의 문제를 해결하기 위하여는 Seybert에 의해 제창된 내, 외부를 연성하여 해석하는 경계요소법에 의한 해석이 유용하다고 여겨지고 있다. 본 연구에서는 연성경계요소법을 재 구성하여 예제로서 얇은 벽면을 갖는 개방된 관에서 방사되는 음장을 선택한 후, 이 방법의 신뢰성, 적용성 및 오차에 대한 해석을 해?ㄴ다. 외부 방사 문제에 있어서의 비유일성문제는 소외 CHIEF 기법을 도입하여 해결하였다. 두 개의 마이크로폰을 사용하여 신호처리를 통한 실험 결과와 본 경계요소법에 의한 결과는 서로 잘 일치하였다. 한편 경계면에 몹시 가까운 지점에서의 음장을 예측할 때의 오차 해석을 수행한 결과, 예측 오차가 10% 이내에서 유지되려면 경계요소법의 가장 짧은 변의 길이가 예측점과 벽면 사이의 거리보다 최소한 10배 이상은 커야함을 알아내었다. 이 기법은 기하학적인 특이점을 포함하는 각종 음향 문제에 매우 유효 적절한 방법으로 생각된다.

• Steel and Composite Structures
• /
• v.3 no.3
• /
• pp.213-229
• /
• 2003

A high precision shear deformable triangular element has been proposed for free vibration analysis of composite trapezoidal plates. The element has twelve nodes at the three sides and four nodes inside the element. Initially the element has fifty-five degrees of freedom, which has been reduced to forty-eight by eliminating the degrees of freedom of the internal nodes through static condensation. Plates having different side ratios (b/a), boundary conditions, thickness ratios (h/a=0.01, 0.1 and 0.2), number of layers and fibre angle orientations have been analyzed by the proposed shear locking free element. Trapezoidal laminate with concentrated mass at the centre has also been analyzed. An efficient mass lumping scheme has been recommended, where the effect of rotary inertia has been included. For validation of the present element and formulation few results of isotropic trapezoidal plate and square composite laminate have been compared with those obtained from open literatures. The numerical results for composite trapezoidal laminate have been given as new results.

• Structural Engineering and Mechanics
• /
• v.35 no.5
• /
• pp.645-658
• /
• 2010

In this study, the Differential Transform Method (DTM) is employed in order to solve the governing differential equation of a moving Bernoulli-Euler beam with axial force effect and investigate its free flexural vibration characteristics. The free vibration analysis of a moving Bernoulli-Euler beam using DTM has not been investigated by any of the studies in open literature so far. At first, the terms are found directly from the analytical solution of the differential equation that describes the deformations of the cross-section according to Bernoulli-Euler beam theory. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equation of the motion. The calculated natural frequencies of the moving beams with various combinations of boundary conditions using DTM are tabulated in several tables and are compared with the results of the analytical solution where a very good agreement is observed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.81-94
• /
• 2000

This study attempted to make a comparative investigation into architecture and fashion. It was intended to grasp the contemporary meaning of fashion expressed in fashion by investigating the image of lightness expressed in contemporary fashion. With the increasing trend of the characteristics of lightness over the whole field of contemporary design, this study took an opportunity to probe its understanding and a desirable direction of expression. The study results were summarized as follows: First, flexibility conveys comfortableness and lightness that makes people feel wear no costume in a soft and flowing style. This phenomenon is thought to express the desire to depart from the dismal and heavy ideology of the past times. Second, lightness is expressed as the virtual transparency felt from what is spatial. It shows a sense of openness while removing the internal and external boundary. Third, liberalness expresses the unfettered consciousness of freedom by expressing an open, free image through free, thin and transparent fashion.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.110-114
• /
• 1999

NOx sensing properties of $Ba_2WO_5$ were investigated by varying the sintering temperature in an effort to study the effects of the neck-width on gas sensitivity. $Ba_2WO_5$ sintered at $800^{\circ}C$, which exhibits neck-controlled conduction provides highest sensitivity of 47 and 29 at $500^{\circ}C$ to NO and $NO_2$, respectively. The samples sintered beyond $800^{\circ}C$ show sintering temperature-independent gas sensitivity. This may be because the grain boundary control is dominant at lower sintering temperatures and open neck control is dominant at higher sintering temperatures than $800{\circ}C$. The NOx sensing mechanism of $Ba_2WO_5$ was briefly discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.202-205
• /
• 1997

We investigated grain boundary effect for terrestrial applications of solar cell\ulcorner with low cost, large area, and high efficiency. Grain boundaries are known as potential barriers and recombination centers for the photo-generated charge carriers, which make it difficult to achieve a high efficiency cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatments, various grid patterns, selective wet etchings for grain boundaries, buried contact metallizations along grain boundaries, and use of metallic thin films. From the various grid patterns we learned that the series resistance of solar cell reduced open circuit voltage and consequently decreased the cell efficiency. This paper describes the effect of various grid patterns and the employment of metallic thin films for a top electrode.