• 한국IT서비스학회지
• /
• 제11권3호
• /
• pp.241-255
• /
• 2012

Recently, smart home environments which provide complex services through smart appliances are becoming realized, due to the advances in connected devices and network technologies. Current smart home environments are mostly restricted, because of difficultly of integration of heterogeneous smart appliances. Therefore radical service integration is impracticable. In this paper, we analyze and implement Machine-to-Machine (M2M) standards which are established by European Telecommunications Standards Institute (ETSI) for integrating heterogeneous devices and services. Smart Home is one of the areas covered by ETSI M2M standards, however these standards are just standardized, so adaption and assessment in smart home are not proved yet. Therefore, this paper analyze ETSI M2M standards by focusing the data transport model and evaluate by selecting the most commonly used smart home scenarios and by implementing ETSI M2M standards compatible smart metering system. In some points ETSI M2M standards are not efficient because of its complexity of structure, however ETSI M2M provides sophisticated features for integrating M2M which are appropriate to adopt diverse smart home environments.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.1-6
• /
• 2022

In this paper, we estimate the mean number of objects in the M/H₂/1 model for web service when the mean object size in the M/H₂/1 model is equal to that of the M/G/1/PS and M/BP/1 models. To this end, we use the mean object size obtained by assuming that the mean latency of deterministic model is equal to that of M/H₂/1, M/G/1/PS, and M/BP/1 models, respectively. Computational experiments show that if the shape parameter of the M/BP/1 model is 1.1 and the system load is greater than 0.35, the mean number of objects in the M/H₂/1 model when mean object size of M/H₂/1 model is the same as that of M/G/1/PS model is almost equal to the mean number of objects in the M/H₂/1 model when the mean object size of M/H₂/1 model is the same as that of M/BP/1 model. In addition, as the upper limit of the M/BP/1 model increases, the number of objects in the M/H₂/1 model converges to one, which increases latency. These results mean that it is efficient to use small-sized objects in the web service environment.

• 대한수학회논문집
• /
• 제9권2호
• /
• pp.355-359
• /
• 1994

It would be interesting to know if energy minimizing harmonic maps between manifolds have symmetric properties when the manifolds under consideration have some. In this paper, we consider among others radial symmetry. A radially symmetric manifold M of dimension m is the one with a point, called a pole, and an O(m) action as an isometric rotation with respect to the pole, or more precisely a radially symmetric manifold M has a coordinate on which the metric is of the form $ds_{M}$$^2$ = d$r^2$ + m(r)$^2$d$\theta^2$ for some function m(r) depending only on r. Of course m(0) = 0, m'(0) = 1, and when m(r) = r, (M, $ds_{ M}$/$^2$) is the Euclidean space $R^2$.(omitted)

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권5호
• /
• pp.385-391
• /
• 2000

Using the patch-clamp technique, we investigated the alteration of 4-aminopyridine(4-AP)-sensitive, voltage-dependent $K^+$ channel (Kv) in the mesenteric arterial smooth muscle cell (MASMC) of renovascular hypertensive model, one-kidney one-clip Goldblatt hypertensive rat (GBH). To isolate $K_V$ current, internal pipette solution contained 5 mM ATP and 10 mM EGTA. Under these condition, MASMC was depolarized by 4-AP, but charybdotoxin did not affect membrane potential. Membrane potential of hypertensive cell $(-40.3{\pm}3.2\;mV)$ was reduced when compared to that of normotensive cell $(-59.5{\pm}2.8\;mV).$ Outward $K^+$ current of hypertensive cell was significantly reduced when compared to normotensive cell. At 60 mV, the outward currents were $19.10{\pm}1.91$ and $14.06{\pm}1.05$ pA/pF in normotensive cell and hypertensive cell respectively. 4-AP-sensitive $K^+$ current was also smaller in hypertensive cell $(4.28{\pm}0.38\;pA/pF)$ than in normotensive cell $(7.65{\pm}0.52\;pA/pF).$ The values of half activation voltage $(V_{1/2})$ and slope factor (k1) as well as the values of half inactivation voltage $(V_{1/2})$ and slope factor (k1) were virtually similar between GBH and NTR. These results suggest that the decrease of 4-AP-sensitive $K^+$ current contributes to a depolarization of membrane potential, which leads to development of vascular tone in GBH.

• Parasites, Hosts and Diseases
• /
• 제37권4호
• /
• pp.237-241
• /
• 1999

In order to analyze chromosome numbers and karyotypes of intestinal trematodes belonging to the genus, Metagonimus, the gonad tissues of M. takahashii, M. miyatai, and M. yokogawai were prepared and examined. The number of bivalents in the first meiotic division of M. takahashii was nine (n＝9). The diploid number of M. miyatai was observed to be eighteen (2n＝18) and their chromosomes consisted of one pair of metacentric, 7 pairs of submetacentric, and one pair of telocentric chromosomes. The diploid number of M. yokogawai was thirty-two (2n＝32) and the chromosome complements were composed of two pairs of metacentric, 11 pairs of submetacentric, and three pairs of subtelocentric chromosomes. These results could be a supporting evidence for the validity of the new species, M. miyatai, distinct from M. yokogawai.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.513-518
• /
• 2007

There is a one to one correspondence between Artinian algebras $k[x_1,...,x_n]/Ann(M)$ and finitely generated $k[x_1,...,x_n]-submodules$ M of $k[y_1,...,y_n]$ by Inverse System. In particular, any Artinian level algebra $k[x_1,...,x_n]/Ann(M)$ can be obtained when M is finitely generated by only maximal degree generators. We prove that H = (1, 4, 8, 13,..., 27, 8, 2) is not a level Artinian O-sequence using this inverse system.

• 대한화학회지
• /
• 제52권3호
• /
• pp.328-337
• /
• 2008

• 정보와 통신
• /
• 제31권4호
• /
• pp.37-43
• /
• 2014

미래에는 사람과 사물, 데이터, 프로세스 등 모든 것이 모바일을 통해 인터넷에 연결되어 정보를 주고 받는 초연결 사회가 될 것이며 이 초연결 사회의 기본이 되는 기술, 서비스는 사물인터넷이다. 본고에서는 미래의 초연결 사회의 기반 기술이 되는 사물인터넷 기술에 대한 국제 표준화 작업을 수행하고 있는 oneM2M의 배경, 조직 구성 및 각 워킹 그룹별 표준화 기술 동향을 알아본다.

• 한국산림과학회지
• /
• 제77권3호
• /
• pp.269-275
• /
• 1988

황발산지(荒發山地)에서 야계수로(野溪水路)의 월류발생원인(越流發生原因)을 구명(究明)하기 위하여 1987년(年) 7월(月)3일(日)부터 7월(月)23일(日)까지 삼성천(三聖川)의 상류지역(上流地域)인 서울대학교(大學校) 부속(附屬) 관악수목원(冠岳樹木園)의 야계수로(野溪水路)를 대상(對象)으로 예상최대홍수류량(豫想最大洪水流量) 및 수로최대유출량(水路最大流出量)을 조사(調査)한 결과(結果)는 다음과 같다. 1. 측정지점(測定地點)에서의 유역면적(流域面積)은 477ha로 설계유역면적(設計流域面積) 410ha의 116%였다. 2. 관측분석(觀測分析)된 최대강우강도(最大降雨强度)는 설계최대강우강도(設計最大降雨强度) 100mm/hr와 거의 같은 99.5mm/hr였다. 3. 실측(實測)한 유출계수(流出係數)는 0.672로 설계유출계수(設計流出係數) 0.35의 약 2배로 나타났다. 4. 예상최대홍수류량(豫想最大洪水流量)은 설계예상최대홍수류량(設計豫想最大洪水流量) $39.9m^3/sec$의 222%인$88.59m^3/sec$였다. 5. 수로횡단면적(水路橫斷面積)을 조사(調査)한 결과(結果), 설계수로횡단면적(設計水路橫斷面積) $25.43m^2$의 68%인 $17.25m^2$을 얻었다. 6. 경심(徑深)은 0.94m로 설계경심(設計徑深) 1.28m 보다 작은 값을 나타내었다. 7. 평균계상(平均溪床)물매는 설계(設計)물매(1.00%)와 거의 같은 0.998%였다. 8. 수로최대평균유속(水路最大平均流速)은 2.87m/sec로 설계수로최대평균유속(設計水路最大平均流速) 3.68m/sec의 78%였다. 9. 수로최대유출용량(水路最大流出容量)을 산출(算出)한 바, 설계수로최대유출용량(設計水路最大流出容量) $93.58m^3/sec$의 53%인 $49.51m^3/sec$였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.86.4-86
• /
• 2002

1. Review of one dimensional M-transform 2. Definition of two dimensional(2D)M-transform 3. Properties of 2D M-transform 4. Mean, Autocorrelation 5. Crosscorrelation of input and output of a system 6. Application to fault detection of mechanical shape