• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1131-1150
• /
• 2014

One of the issues in extending the range of applicable problems of real-time hybrid simulation is the computation speed of the simulator when large-scale computational models with a large number of DOF are used. In this study, functionality of real-time dynamic simulation of MDOF systems is achieved by creating a logic circuit that performs the step-by-step numerical time integration of the equations of motion of the system. The designed logic circuit can be implemented to an FPGA-based system; FPGA (Field Programmable Gate Array) allows large-scale parallel computing by implementing a number of arithmetic operators within the device. The operator splitting method is used as the numerical time integration scheme. The logic circuit consists of blocks of circuits that perform numerical arithmetic operations that appear in the integration scheme, including addition and multiplication of floating-point numbers, registers to store the intermediate data, and data busses connecting these elements to transmit various information including the floating-point numerical data among them. Case study on several types of linear and nonlinear MDOF system models shows that use of resource sharing in logic synthesis is crucial for effective application of FPGA to real-time dynamic simulation of structural response with time step interval of 1 ms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.414-417
• /
• 2001

In today's engineering world, any product development activity requires the expertise and the interaction of many different engineering. Therefore the various activities in a product development architecture are highly distributed and interdependent. The interdependence may be due to sharing of databases and transfer of information between various activities. This will require an integrated product model. That can support distributed design such that participants from different backgrounds collaborate towards one common goal. This paper presents the architecture of the product modeling system for the integration of CAD and CAE. It then reports on the study of STEP 10303 and UG open API focused on the integration of different technical environments.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.537-573
• /
• 2015

Multiple-step beams carrying intermediate lumped masses with/without rotary inertias are widely used in engineering applications, but in the literature for free vibration analysis of such structural systems; Bernoulli-Euler Beam Theory (BEBT) without axial force effect is used. The literature regarding the free vibration analysis of Bernoulli-Euler single-span beams carrying a number of spring-mass systems, Bernoulli-Euler multiple-step and multi-span beams carrying multiple spring-mass systems and multiple point masses are plenty, but that of Timoshenko multiple-step beams carrying intermediate lumped masses and/or rotary inertias with axial force effect is fewer. The purpose of this paper is to utilize Numerical Assembly Technique (NAT) and Differential Transform Method (DTM) to determine the exact natural frequencies and mode shapes of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and/or rotary inertias. The model allows analyzing the influence of the shear and axial force effects, intermediate lumped masses and rotary inertias on the free vibration analysis of the multiple-step beams by using Timoshenko Beam Theory (TBT). At first, the coefficient matrices for the intermediate lumped mass with rotary inertia, the step change in cross-section, left-end support and right-end support of the multiple-step Timoshenko beam are derived from the analytical solution. After the derivation of the coefficient matrices, NAT is used to establish the overall coefficient matrix for the whole vibrating system. Finally, equating the overall coefficient matrix to zero one determines the natural frequencies of the vibrating system and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equations of the motion. The calculated natural frequencies of Timoshenko multiple-step beam carrying intermediate lumped masses and/or rotary inertias for the different values of axial force are given in tables. The first five mode shapes are presented in graphs. The effects of axial force, intermediate lumped masses and rotary inertias on the free vibration analysis of Timoshenko multiple-step beam are investigated.

• Journal of Ship and Ocean Technology
• /
• 제9권3호
• /
• pp.33-42
• /
• 2005

As the networks connect the world, enterprises tend to move manufacturing activities into virtual spaces. Since different software applications use different data terminology, it becomes a problem to interoperate, interchange, and manage electronic data among heterogeneous systems. It is said that approximately one billion dollar has been being spent yearly in USA for product data exchange and interoperability. As commercial CAD systems have brought in the concept of design feature for the sake of interoperability, terminologies of design features need to be harmonized. In order to define design feature terminology for integration, knowledge about feature definitions of different CAD systems should be considered. STEP standard have attempted to solve this problem, but it defines only syntactic data representation so that semantic data integration is not possible. This paper proposes a methodology for integrating modeling features of CAD systems. We utilize the ontology concept to build a data model of design features which can be a semantic standard of feature definitions of CAD systems. Using feature ontology, we implement an integrated virtual database and a simple system which searches and edits design features in a semantic way.

• 대한물리치료과학회지
• /
• 제8권1호
• /
• pp.799-811
• /
• 2001

The purpose of this study was to examine the effects of sensory integration therapy (SIT) on gross motor development and respiratory function of cerebral palsy children. The design of this study was one-group pre-and post-test design. Subjects of the study were arbitrarily chosen based on predetermined selection criteria among the cerebral palsy children who were treated as out-patients at one rehabilitation hospital in Kyunggi-do. The study was conducted between early April and late July in 2000. Twelve children were in the experimental group. A five-step SIT program was devised from a combination of SIT programs suggested by Ayres(1985) and Fink(1989), and an author-designed SIT program for cerebral palsy children. The experimental group was subjected to 20 to 30 minutes of SIT per session, two sessions a week for ten-week period. Collected data were statistically analyzed by SPSS PC for Wilcoxon signed rank test, and paired t-test. The results were as follows: 1. In gross motor development, post-experimental gross motor scores were higher compared to pre-experimental scores with statistical significance. 2. In respiratory function, post-experimental forced capacity vital scores were higher compared to pre-experimental scores with statistical significance. In conclusion, SIT was found to be effective in gross motor development and respiratory function. But, for the more effectiveness of SIT on gross motor development and respiratory function, further studies employing longer-time experiments are recommended.

• Computers and Concrete
• /
• 제4권6호
• /
• pp.437-456
• /
• 2007

The shrinkage of large reinforced concrete floors often gives rise to cracking problems. To identify the problematic areas, shrinkage movement analysis is often carried out by finite element method with proper creep and shrinkage models using step-by-step time integration. However as the full stress history prior to the time interval considered is necessary, with the increase in the number of time intervals used, the amount of computations increases dramatically. Therefore a new method using the shrinkage-adjusted elasticity modulus (SAEM) is introduced so that analysis can be carried out using one single step. Examples are presented to demonstrate its usefulness.

• Structural Engineering and Mechanics
• /
• 제69권3호
• /
• pp.243-255
• /
• 2019

Utilization of fiber beam-column element has gained considerable attention in recent years due mainly to its ability to model distributed plasticity over the length of the element through a number of integration points. However, the relatively high sensitivity of the method to modeling parameters as well as material behavior models can pose a significant challenge. Residual drift is one of the seismic demands which is highly sensitive to modeling parameters and material behavior models. Permanent deformations play a prominent role in the post-earthquake evaluation of serviceability of bridges affected by a near-fault ground shaking. In this research, the influence of distributed plasticity modeling parameters using both force-based and displacement-based fiber elements in the prediction of internal forces obtained from the nonlinear static analysis is studied. Having chosen suitable type and size of elements and number of integration points, the authors take the next step by investigating the influence of material behavioral model employed for the prediction of permanent deformations in the nonlinear dynamic analysis. The result shows that the choice of element type and size, number of integration points, modification of cyclic concrete behavior model and reloading strain of concrete significantly influence the fidelity of fiber element method for the prediction of permanent deformations.

• Coupled systems mechanics
• /
• 제3권1호
• /
• pp.1-25
• /
• 2014

In this work, we present the theoretical formulation, operator split solution procedure and partitioned software development for the coupled thermomechanical systems. We consider the general case with nonlinear evolution for each sub-system (either mechanical or thermal) with dedicated time integration scheme for each sub-system. We provide the condition that guarantees the stability of such an operator split solution procedure for fully nonlinear evolution of coupled thermomechanical system. We show that the proposed solution procedure can accommodate different evolution time-scale for different sub-systems, and allow for different time steps for the corresponding integration scheme. We also show that such an approach is perfectly suitable for parallel computations. Several numerical simulations are presented in order to illustrate very satisfying performance of the proposed solution procedure and confirm the theoretical speed-up of parallel computations, which follow from the adequate choice of the time step for each sub-problem. This work confirms that one can make the most appropriate selection of the time step with respect to the characteristic time-scale, carry out the separate computations for each sub-system, and then enforce the coupling to preserve the stability of the operator split computations. The software development strategy of direct linking the (existing) codes for each sub-system via Component Template Library (CTL) is shown to be perfectly suitable for the proposed approach.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.397-400
• /
• 1999

As the result of enhancement of CAD, Design Automation and manufacturing technology, it's on the increasing complexity, integration ratio, data signals, and pin count to IC chips. This brings about difficulties of testing, and incresing test time. Now One of the most cost-consuming procedure as integration ratio increases is the testing step. In this paper, we propose a new method, “Efficient TP(test point) assignment algorithm” using “input grouping”, This is helpful method to reducing test length without losing fault coverage. Experimental results show that proposed method reduces test length remarkably and doesn't miss fault coverage, with low hardware overhead Increasing.

• 한국실내디자인학회논문집
• /
• 제15권3호
• /
• pp.136-143
• /
• 2006

This research proposes the importance of physical environment if integrated early childhood education. For a successful integration of children's education, we processed fundamental research on requirements of facility and equipments, looking at related standards and code on handicapped person's convenience facility. Also, this research alms at providing first step to establish evaluation method and quality assurance standards of integrated child care facility, regarding space planning of handicapped children. By examining home and abroad material and analyzing handicapped children's convenience facility standards, this research pursues improving the basis of planning criteria. As present criteria of relevant regulations appears not to handle detailed facility standards, and the handicapped people's facility is for childhood education, it is necessary first to differentiate indispensable equipments from optional one, then categorize them into more specific needs.