• 제목/요약/키워드: one-chip micom

검색결과 5건 처리시간 0.019초

단일칩 마이컴을 이용한 위상변위 방식 풀브리지 직류-직류 전력변환기 (Phase-Shift Full-Bridge DC-DC Converter using the One-Chip Micom)

  • 정강률
    • 전기전자학회논문지
    • /
    • 제25권3호
    • /
    • pp.517-527
    • /
    • 2021
  • 본 논문에서는 단일칩 마이컴을 이용한 위상변위 방식 직류-직류 전력변환기를 제안한다. 제안한 전력변환기의 1차측은 위상변위 방식에 의하여 단극성 펄스폭변조(unipolar PWM)로 동작하는 풀브리지 전력구조이며, 2차측은 4개의 다이오드로 구성된 풀브리지 전파정류기이다. 제안한 전력변환기의 제어는 단일칩 마이컴에 의해 수행되고, 그 MOSFET 스위치들은 부트스트랩 회로에 의해 구동된다. 그래서 전력변환기의 전체 시스템은 간단하다. 제안한 전력변환기는 공진회로와 저지커패시터를 이용하여 고효율을 달성한다. 본 논문에서는 먼저, 제안한 전력변환기의 전력회로의 동작을 각 동작모드를 따라 설명한다. 그리고 제안한 전력변환기의 전력회로 설계방식을 보이고 제안한 전력변환기를 동작시키는 마이컴 상의 소프트웨어 제어 알고리즘과 피드백 및 스위치 구동 회로에 관하여 간략히 설명한다. 그 후, 본 논문에서 제시한 설계와 구현방식에 의하여 설계하고 제작된 시제품 전력변환기의 실험결과를 통하여 제안한 전력변환기의 동작 특성을 입증한다. 실험결과에서 약 92% 정도의 최고 효율을 얻었다.

양방향 통신이 가능한 자동화재탐지설비(P형 1급 수신기)의 설계 및 동작특성에 관한 연구 (A Study on Design and Operation Performance of Automatic Fire Detection Equipment (P-type One-class Receiver) by Bidirectional Communication)

  • 이봉섭;곽동걸;정도영;천동진
    • 전기학회논문지
    • /
    • 제61권2호
    • /
    • pp.347-353
    • /
    • 2012
  • In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.

원칩 마이컴을 이용한 단상유도전동기의 주권선 제어에 관한 연구 (A Study on the Main Winding Control of Single Phase Induction Motor using One-Chip Micom)

  • 박수강;백형래
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권1호
    • /
    • pp.70-76
    • /
    • 2000
  • This paper describes a one-chip micom controller and phase angle control method for self-starting and energy saving of single-phase induction motor. The proposed method is based on the optimal efficiency control which is running by variable phase angle of main winding current such as to maintain the maximum efficiency characteristics of the motor, in voltage control with TRIAC. Experiments are focused on a capacitor starting single-phase induction motor. The optimal energy saving by variable phase angle control are verified by experimental results. Also, auxiliary winding was controlled by electronic starting switch.

  • PDF

원칩 마이컴을 이용한 형광등용 역률보상기 및 전자식 안정기의 동시제어 (Simultaneous Control of Power Factor Corrector and Electronic Ballast for Fluorescent Lamp Using One Chip Micom)

  • 박효식;한우용;이공희
    • 전기학회논문지P
    • /
    • 제53권4호
    • /
    • pp.166-170
    • /
    • 2004
  • In this paper, it has been proposed the simultaneous control of PFC (power factor corrector) and electronic ballast for fluorescent lamp by one chip micro-controller. Boost DC-DC converter is adopted for PFC, and half bridge inverter for electronic ballast. It controls, simultaneously and independently, the boost DC-DC converter and the half bridge inverter. As PFC and electronic ballast are controlled by one chip micro-controller, it is possible to achieve the simpler and the cheaper controller for fluorescent lamp. Experimental results have shown the feasibility of the proposed simultaneous control of PFC and electronic ballast by one chip micro-controller.

체성분 분석용 칩 설계 (A Chip Design of Body Composition Analyzer)

  • 배성훈;문병삼;임신일
    • 대한전자공학회논문지SD
    • /
    • 제44권3호
    • /
    • pp.26-34
    • /
    • 2007
  • 본 논문에서는 신체 임피던스 측정법(Bioelectrical Impedance Analysis, 이하 BIA)을 기초로 한 체지방 측정 칩 설계에 대한 내용을 서술하였다. 제안된 회로는 인체에 전류 신호를 인가하는 회로, 인체를 통해 나온 전압 신호를 측정하는 회로, 회로의 동작을 제어하는 마이크로 콘트롤러(Micom), 그리고 분석프로그램이 내장된 메모리(SRAM, EEPROMs) 의 모든 기능을 하나의 칩에 집적하였다. 특히 정밀한 인체 임피던스 측정을 위하여 다주파수 동작이 가능한 대역통과필터(Band Pass Filter, BPF)를 설계하였다. 또한, 설계된 대역통과필터는 weak inversion 영역에서 동작하기 때문에 면적과 전력소모를 줄일 수 있었다. 그리고 측정부분 회로의 성능을 개선하기 위해서 차동차이증폭기(Differential difference amplifier, DDA)를 이용한 새로운 전파정류기(Full wave rectifier, FWR)를 설계하였다. 또한 이 회로는 마지막 단에 연결될 아날로그-디지털 변환기(ADC)의 설계에 대한 부담을 덜어주는 장점도 있다. 이 칩의 시제품은 CMOS 0.35um 공정을 이용하였고 전력소모는 모든 주파수에서 6mW 이며 전원전압은 3.3V이다. 전체 칩의 크기는 $5mm\times5mm$ 이다.