• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.83-90
• /
• 2013

The purpose of this study is to replace existing liquid chlorine with localization of on-site high (12%) sodium hypochlorite generation system. On-site high (12%) sodium hypochlorite generation system is higher the current efficiency of 38.7%, 54.6% reduction of salt consumption, and 97.3% lower rate of chlorate than on-site low (0.8%) sodium hypochlorite generation system.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.132-140
• /
• 2005

The pilot test of a new alternative for small wastewater treatment system has been conducted for two years. It consists of a hybrid bioreactor and the expert system including the process control logic, PLC system, and HMI for the process automation. In order to monitor and remote control its status, the real-time data was transferred from the on-site control center to the central station via a wireless local area network. More efficient and stable performances were observed at automatic operating mode compared with the manual. On an average, COD, SS, T-N and T-P concentrations in the effluent from the hybrid bioreactor were less than 14, 7, 12 and 0.9 mg/L, respectively. According to the result from pilot tests, the quality of treated wastewater with sand filtration was enough to be utilized again.

• Korean Management Science Review
• /
• v.29 no.2
• /
• pp.143-155
• /
• 2012

The purpose of this study is to formulate and solve the scheduling problem to heat-treatment process in forging process and apply it to industries. Heat-treatment is a common process in manufacturing heavy forged products in ship engines and wind power generators. Total complete time of the schedule depends on how to group parts and assign them into heat furnace. Efficient operation of heat-treatment process increases the productivity of whole production system while scheduling the parts into heat-treatment furnace is a combinatorial problem which is known as an NP-hard problem. So the scheduling, on manufacturing site, relies on engineers' experience. To improve heat-treatment process schedule, this study formulated it into an MIP mathematical model which minimizes total complete time. Three methods were applied to example problems and the results were compared to each other. In case of small problems, optimal solutions were easily found. In case of big problems, feasible solutions were found and that feasible solutions were very close to lower bound of the solutions. ILOG OPL Studio 5.5 was used in this study.

• Journal of Korean Traditional Oncology
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2020

Objective: The purpose of this study is to report improvement of symptoms after lobectomy of male breast cancer lung metastasis treated with Korean Medicine based Integrative Cancer Treatment (ICT). Methods: A male left breast cancer patient diagnosed with metastasis on lung at July 2019. After Video assisted thoracic surgery (VATS) left lower lobe (LLL) lobectomy and En bloc wedge resection the patient visited the Daejeon korean medicine hospital of Daejeon university East West Cancer Center (EWCC) to treat operation-site (op-site) pain, dysphagia, anorexia with Korean Medicine Treatment. The patient was treated with Korean Medicine based ICT for an approximately 20 days. The clinical outcomes were measured by National Cancer Institute Common Terminology Criteria for Adverse Event (NCI-CTCAE), Numeral rating scale (NRS) and Eastern Cooperative Oncology Group (ECOG). The safety of treatment was verified by blood tests. Results: After treatment, op-site pain was improved from NRS 9 to 6, dysphagia and anorexia were relieved from NRS 9 to 2. And ECOG score of the patient was improved from grade 2 to 1. Conclusion: This case study suggests that Korean Medicine based ICT may help to improve post operative sequelae in metastatic lung cancer patient.

• Advances in Computational Design
• /
• v.7 no.4
• /
• pp.345-369
• /
• 2022

Infectious disease emergency hospitals are usually temporarily built during the pneumonia epidemic with higher requirements regarding diagnosis and treatment efficiency, hygiene and safety, and infection control.This study aims to identify how the Building Information Modeling (BIM) + Industrialized Building System (IBS) approach could rapidly deliver an infectious disease hospital and develop site epidemic spreading algorithms. Coronavirus-19 pneumonia construction site spreading algorithm model mind map and block diagram of the construction site epidemic spreading algorithm model were developed. BIM+IBS approach could maximize the repetition of reinforced components and reduce the number of particular components. Huoshenshan Hospital adopted IBS and BIM in the construction, which reduced the workload of on-site operations and avoided later rectification. BIM+IBS integrated information on building materials, building planning, building participants, and construction machinery, and realized construction visualization control and parametric design. The delivery of Huoshenshan Hospital was during the most critical period of the Coronavirus-19 pneumonia epidemic. The development of a construction site epidemic spreading algorithm provided theoretical and numerical support for prevention. The agent-based analysis on hospital evacuation observed "arched" congestion formed at the evacuation exit, indicating behavioral blindness caused by fear in emergencies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.3
• /
• pp.454-462
• /
• 1996

With the increase of population, dramatic urbanization, traffic, leisure and sports, the number of maxillofacial injury has increased markedly. Subsequently the number of motor vehicle accident, sports accident and industrial accident were increased and the number of oral and maxillofacial trauma patients were also markedly increased. A clinical study on 177 patients with facial bone fracture who visited Kangnam General Hospital during 4 years(1992-1995) was done by analysing sex, cause, fracture site, treatment method, complication and involvement of other body part. The results obtained were as follows : 1. The occurrence was more frequent in male than in female with the ratio of 4.2 : 1 and most frequently in twenties. 2. Violence was the most common cause of facial bone fracture. 3. Mandible was the most frequently occurred site and there were more cases of simple fracture(81.9%) than cases of compound fracture. 4. Simple fracture was most frequently occurred(44.0%). 5. In mandible fracture, simple fracture was 86.1%, fracture site was average 1.5 sites, most frequently in symphysis. 6. As treatment methods, open reduction(78.5%) was used more frequently than closed reduction(21.5%). 7. Post-operative complication occurred in 29.4% of the cases. 8. Other injuries that were related to maxillofacial fracture occurred in 28.2%.

• Journal of Gastric Cancer
• /
• v.7 no.3
• /
• pp.174-179
• /
• 2007

The survival of patients with gastric cancer is improved by early diagnosis and surgical treatment. However, there is no established treatment for locally recurrent cancer or cancer arising at an anastomotic site after total gastrectomy; further, most surgeons are reluctant to resect this type of cancer because of frequent systemic metastasis and there are few competent surgeons who have the skill to perform such an operation. We have experienced recurrent cancer at an anastomotic site after total gastrectomy: one patient had recurrent cancer and two patients had metachronous cancer. All these patients were operated on and the patients were discharged without any complications. All of them are alive at the time of this report. In some cases, good results could be expected for operating on recurrent cancer of an anastomotic site after previous total gastrectomy. So, we present here our experience along with a review of literatures.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.3 s.53
• /
• pp.1-12
• /
• 2004

This study was conducted to evaluate the variation characteristics of influent and effluent quality from sewage treatment facilities using activated sludge processes and to assess the impact caused by discharge of treated sewage on the receiving water Monthly data of five water quality items (BOD, COD, SS, T-N, T-P) were used to understand the water quality at three sewage treatment plants in Seoul for five years from 1999 to 2003. Concentration differences of water quality parameters were observed between upstream and downstream site at the sewage treatment plant outfall to investigate the impact of discharge in Tan stream and Han river basin. 1. Due to the effect of continuous improvement in sewer system, the concentrations of influent went on increasing generally. 2. Effluent concentrations of BOD, COD and SS showed the trend of a little decreasing, but the trend of increasing in T-N and T-P. 3. In Tan stream basin, the impact of sewage treatment plant discharge was not observed directly, because concentration of discharge was lower than stream water's. But discharges from sewage treatment plants affected water quality at downstream site in Han river, concentration of T-P especially.

• The Journal of the Korean dental association
• /
• v.51 no.12
• /
• pp.643-649
• /
• 2013

The aim of this study was to achieve the healing of peri-implantitis defects and the hard tissue regeneration using the augmentation of a xenograft on defect site. Two patients were treated with the surgical approach. With a full muco-periosteal flap elevation, the implant surfaces were exposed and taken the debridement of granulation tissue around the abutment. Each surface of the abutments was prepared with the air-abrasive device (PerioFlow$^{(R)}$) for decontamination. Bovine-derived bone mineral (Bio-Oss collagen$^{(R)}$) was then used to fill the defects, and no membrane was placed on the grafting site. Radiographs and clinical photo was taken to compare from baseline status. Within the limits of the present case, this case shows the significance of the surgical treatment of peri-implantitis. And this also verifies the stability of bovine-derived bone mineral and effectiveness of Air-abrasive device (PerioFlow$^{(R)}$).

• Conservation Science in Museum
• /
• v.31
• /
• pp.71-103
• /
• 2024

The National Museum of Korea Conservation science division conducted a precise diagnosis and a non-destructive investigation to comprehensively assess the overall damage of the Twin-lion stone lantern from the Godalsa Temple site, Yeoju to be placed on display in the museum's outdoor stone garden, then reviewed the relevant conservation and management plan and applied conservation treatment to the artifact. The museum carried out the treatment in the following order: precise diagnosis; dismantling of the previously-restored part of the roof stone; reinforcement and restoration of the roof structure with new stone; restoration of the previously-restored part of the lantern's support stone (jungseok); surface texture treatment to the restored area; cleaning (basic, laser); and color matching. The previously-restored part of the roof stone was removed and restored with new stone material, based on the results of a safety diagnosis regarding the separation at the said part. Granite from the Sangju area was selected as the material for the restoration in consideration of the results of mineral analysis as well as the surface color and particle size. The new stone was divided into three pieces based on the descending edges of the octagonal roof structure and joined together using epoxy resin. The structure was further strengthened by inserting titanium rods. It is expected that the status diagnosis and conservation treatment of the twin-lion stone lantern from the Godalsa Temple site in Yeoju will be used as a reference for the future conservation and management of outdoor displays of stone cultural heritage.