• 공학교육연구
• /
• 제21권1호
• /
• pp.44-55
• /
• 2018

The purpose of this study is to investigate the relationship between post - employment job satisfaction and both short-term (4-12 weeks) and long-term (12+weeks) on-site training. For this purpose, 405 graduates who had completed on-site training (205 short-term, 200 long term) during the school year were surveyed. The results of the comparative analysis of both short-term and long-term on-site training participants are as follows: In both short-term and long-term on-site training, it was found that on-site performance during the school year did not directly affect post-employment job satisfaction. In the case of short-term on-site training participants, job match and organizational commitment were found to have no mediating effect on the correlation between on-site training performance and job satisfaction. On the other hand, in the case of long-term on-site training participants, the analysis showed that job match and organizational commitment had mediating effects on the correlation between on-site training performance and job satisfaction. These effects are not solely attributable to differences in duration of training; the differences in operating systems and the degree of preparation derived from these systems also affect the level of on-site training for students, businesses, and schools. This paper summarizes these findings and suggests the following improvement plans for on-site training in the future: First, short-term on-site training is required to establish a systematic basis in order to enhance students' preparedness level. Second, both short-term and long-term on-site training should improve the skills and field understanding for students' majors through systematic quality management during the training period. Third, it is necessary for universities to increase expectations and quality of short-term on-site training for all involved while simultaneously reducing the gap between educational goals and practice in this field.

• 한국산림과학회지
• /
• 제88권3호
• /
• pp.364-373
• /
• 1999

이 연구는 전나무림과 잣나무림에서 산림시업(山林施業)(간벌 및 가지치기)이 토양(土壤)의 물리성(物理性) 및 수질변화(水質變化) 등에 미치는 영향(影響)을 파악함으로써 산림시업(山林施業)에 따른 산림(山林)의 수질정화기능(水質淨化機能)을 평가(評價)하기 위한 기초자료(基礎資料)를 제공(提供)하기 위하여 실시하였다. 1996년 3월부터 5월까지 산림시업을 한 광릉시험림 31, 33임반내 전나무림과 잣나무림 유역에서 1998년 3월 1일부터 1998년 8월 4일까지 임분특성(林分特性), 토양(土壤)의 물리적(物理的) 특성(特性), 그리고 강우(降雨), 임내우(林內雨)(수관통과우(樹冠通過雨), 수간류(樹幹流)), 토양수(土壤水), 계류수(溪流水)의 수질동태(水質動態)를 분석(分析)하였다. 산림시험 후 약 2년 6개월이 경과된 1998년 9월 현재, 전나무림과 잣나무림에서 임목의 평균수고(平均樹高), 평균흉고직경(平均胸高直徑)은 시업구가 비시업구 보다 각각 1.8m, 0.6m, 4.7cm, 1.4cm 더 성장하였으며, 시업구는 비시업구 보다 A층 토양에서의 조공극율(粗孔隙率), 총공극율(總孔隙率)은 증가하였으나, 토양(土壤)의 가비중(假比重)은 감소하여 전나무림과 잣나무림에서는 산림시업(山林施業)에 따라 산림토양(山林土壤)의 강수침투구조(降水浸透構造)는 개선(改善)되는 것으로 나타났다. 또한, 전나무림과 잣나무림에서 산림시업(山林施業)으로 임우내(林內雨) 및 토양수(土壤水)의 완충효과(緩衝效果)가 증대(增大)되는 것으로 분석(分析)되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• 경영과학
• /
• 제23권1호
• /
• pp.43-61
• /
• 2006

This research is an empirical investigation into the dimensions determining the website quality of domestic online shopping malls. A research model that has been formed to find the website quality dimensions is based on DeLone and McLean's information system success model that we adapted to fit the B2C electronic commerce environment by incorporating existing research on IS service quality and website quality. The model incorporates three quality dimensions including the information quality, system quality and service quality, and an attempt was made to empirically examine the relationship between variables of these dimensions and the revisit intent. The results of the study revealed that five quality-related variables were found to importantly contribute to the user's intent to revisit a site : the information accuracy and relevancy, system reliability, ease of use, and on-line support. The paper concludes that the three quality dimensions can serve as a useful framework to evaluate the quality of online shopping mall websites in an attempt to improve the website revisit rate.

• 한국관개배수논문집
• /
• 제11권2호
• /
• pp.158-162
• /
• 2004

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.586-590
• /
• 2011

This paper presents the case study of the CE by collaborative system and proposes a model of the CM group for the cable supported bridge. The cable supported bridges have a large project scale and need a high level of construction method. Therefore an advanced construction management system is required for successful completion of project. The construction management (CM) group which control design management, construction plan, subcontract, technical support and R&D is organized for the cable supported bridge project. The CM group established a collaborative system with construction site and drew an effective management of cost, process, quality, safety for each project. Furthermore, the CM group established the procedure of construction management based on the construction engineering (CE) items and performed the project management on the construction phase. Efficiency of cost reduction and site control is maximized by using a collaborative system.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.263-270
• /
• 2017

The precast concrete (PC) structure has been preferred for reasons of shortening the construction time and securing the quality and, in particular, it has a cost saving effect in case of long span and heavy loaded structure with high floor height. Most engineers take it for granted to install the plant produced PC members. Researchers in several papers have argued that slander PC members such as columns and girders can be cost-effective if in-situ production is possible, while ensuring quality equal to or better than in-plant production. However, this argument is not officially accepted because objective verification has not been done. Therefore, the purpose of this study is to experimentally conduct in-situ production of PC members to verify the above claim. For this study, a storage building with long span and heavy loaded structure with high floor height was selected as a case study site. For the site, most of the PC members were supplied from the plant, and some of the columns were produced in the site for this study. As a result, it has been confirmed that it has a cost saving effect of 20% while having superior quality to plant-produced PC columns.

• Asia pacific journal of information systems
• /
• 제13권4호
• /
• pp.207-227
• /
• 2003

The purpose of this research is to identify if psychological temptation, site quality and sense of community influence user's flow and addiction and to identify causalities among flow, addiction, customer satisfaction and customer loyalty in online industry. Many previous researches in the area of online games have been carried out about addiction by psychologist and about the development of related technologies by scientists. There are only a few studies about the customer satisfaction from the online business perspective. However, this research is different from the previous ones in the sense that both flow and addiction are considered in the study of the relationship between customer satisfaction/loyalty and flow/addiction in the area of online industry. The empirical results of high-order factor analysis indicate that six independent variables such as design, information, feedback, impulsiveness and motivation have converge three second-order variables such psychological temptation, site quality and sense of community. Consequently, site quality and sense of community have impacts on the flow, while on the other hand, psychological temptation has impacts on the addiction. Conclusively, customer satisfaction and loyalty are positively related not with the addiction but with the flow. Besides, customer loyalty is significantly influenced by the flow and the customer satisfaction. This indicates that companies in the online game industry have to develop a strategy for the flow which is more socially and ethically allowable than the addiction.

• 한국의료질향상학회지
• /
• 제18권1호
• /
• pp.71-78
• /
• 2012

Background : The objective of this study was to examine the effect of management system for the appropriate prophylactic use of antibiotics in surgical patients at a tertiary hospital from 2007 to 2010. Methods : We collected clinical data of three different surgical procedures(colectomy, heart surgery, hysterectomy) for three months of 2007 and 2010, respectively. The number of total cases was 245(137, 54, 54) in 2007, 240(133, 42, 65) in 2010. We measured the rate of use of inappropriate prophylactic antibiotics, administration within 1 hour prior to the incision and the antibiotics prescription days after surgery. To evaluate the effectiveness of the management system, the results of the two groups(Group1=2007, Group2=2010) were compared by t-test, chi-square test or Fisher's exact test. Result : The rate of Aminoglycoside uses decreased drastically from 11.4% to 0.8%(P<.001). The selection of 3rd/4th Cephalosporin dropped from 11.8% to 5.8%(P=.020). The combination of antibiotics decreased from 27.8% to 11.7%(P<.001). The antibiotic prescription rate on discharge declined from 11.8% to 2.5%(P<.001) and the number of antibiotics prescription days after surgery was shortened from 4.2 days to 2.3 days(P<.001). No significant difference in the rate of administration within 1 hour between two groups was found. Through 3-year management, 5 out of 6 measures were significantly improved(except the administration within 1 hour). The rate of surgical site infection decreased from 2.4% to 1.3%(P=.504). Conclusion : The findings demonstrate that the management system for the prophylactic use of antibiotics in surgical patients was effective in decreasing the rate of surgical site infection during 3 years.

• 토지주택연구
• /
• 제10권3호
• /
• pp.67-75
• /
• 2019

The modular construction means that more than 70% of the parts such as walls, windows, electrical wiring, facility piping, bathrooms, and kitchen appliances are pre-assembled at the factory and transported to the site. It is possible to shorten the construction period than general construction work and to secure high quality through modular mass production since the modular construction works in the field at the same time as the modular production. However, there are only four domestic modular manufacturers, and each company's modular components and construction methods are different, so it is necessary to standardize them. Therefore, this study investigated the construction process centering on the stacking method of modular housing construction work applied to D site in Cheonan-si, and proposed the key points of quality management by construction stage. As the project was conducted as a pilot project for government R&D projects, some differences may occur from general modular housing construction. However, the construction process and quality control focus of each unit box type modular house analyzed in this study can be used as basic data in the future of modular housing construction. In addition, the results of this study can be used to establish construction standards, such as the development of checklists and establishment of standard processes.