• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.112-120
• /
• 2019

Benzene is a class 4 hazardous material according to the Act on the Safety Control of Hazardous Substances. This study qualitatively evaluated the damage size of a "toxic" accident and "pool fire" accidents based on benzene in a virtual scenario of a fire and leakage accident during unloading at a port facility. The KORA program was used as an evaluation method, which is supported as a universal program by the National Institute of Chemical Safety. The range of damage effects of a benzene-induced fire and leakage accident was predicted. In the case of toxic damage range, the accident's damage effect range for the "worst case scenario" was reduced by up to 5.11% with a decrease in the size of the leakage hole. In the case of the leakage time, the damage effect range increased to 145.12% with a 10 min leakage time compared to that of a 5 min leakage time and went up to 20 min (212.29%) with a 20 min leakage time. In the case of pool-fire-induced damage, the damage effect range by radiant heat in the "worst case scenario" was 228.8 m in radius from the center of the handling facility. In the "alternative scenario," the damage effect range by radiant heat was reduced by up to 8.26% compared to that in the "worst case scenario" since the size of the leakage hole was decreased by reducing the cross-sectional area of the pipe.

• The Journal of Natural Sciences
• /
• v.6 no.1
• /
• pp.55-64
• /
• 1993

Experiments were conducted to study the effect of auxins and cultural factors on rooting characteristics in offshoots cutting of Aloe vera. The result obtained were as follows;1. Short offshoots(15-20cm) with rhizome had more roots than that of the removed rhizome, while long offshoots(25-30cm) without rhizome had more roots and heavier root dry weight than short offshoots with rhizome. The highest rooting ability occured when IBA treated 500mg per liter in short offshoots with rhizome, whereas long offshoots without rhizome showed higher rooting ability at the level of 1,000mg/l of IBA and 200mg/I of NAA2. Among three kinds of anxin treated, both IBA and NAA showed better rooting ability than ethychlozate. Root number, root length and root dry weight were higher at 10 min. dipping treatment of IBA 500mg/I for short off-shoots without rhizome and 10 min. dipping treatment of IBA 1,000mg/l for long offshoots with rhizome. Rooting ability of long offshoots was higher than that of short offshoots.3. In addition to IBA 1,000mg/l, 7-day dryness under shading condition increased root number and dry weight of root in offshoots without rhizome. Control treatment lengthened root by increasing drying period under the shading condition.4. The plain soil with mamure had not only higher root dofferentiation but higher root growth of offshoots cutting than the artificial soil.5. Rooting ability in offshoots cutting had a tendency increasing with decrease in shading percentage to natural. Black color poly ethylene film mulching had better rooting ablility than transparency poly ethlene film mulching in offshoots cutting.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.207-210
• /
• 2008

It is very important factors to control optimal light transmission ratio and soil moisture content in order to produce good quality of ginseng seedling. To study the effect of light transmission ratio (LTR) and soil moisture content(SMC) on growth characteristics and yield of ginseng seedling, LTR was controlled by three level such as 21.2, 24.8% and 30.3%, and SMC was plotted by four level of 11.0%, 12.5%, 15.3% and 18.9% at the greenhouse. Chlorophyll content was gradually decreased in the low LTR (21.2%), while it was distinctly decreased by the decrease of SMC in excessively high LTR (30.3%). The decrease of SMC in the high LTR increased heat injury ratio distinctly, while heat injury ratio in the low LTR was only increased when SMC was very low such as 11.0%. All of fresh root weight per Kan (3.3$m^2$), root weight per plant, and the number of usable seedling were distinctly decreased by the increase of LTR and the decrease of SMC. Excessive increase of LTR in optimal SMC (18.9%) hadn't a great effect on the decrease of root weight, while root weight in low SMC was distinctly decreased by the increase of LTR. Ratio of rusty root was distinctly increased in the condition that both of LTR and SMC were high. Ratio of rusty root in the excessively high LTR was gradually fallen off by decrease of SMC, but its ratio in low SMC didn't changed distinctly by the decrease of SMC.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.325-330
• /
• 2004

Several kinds of low voltage cables have been used in nuclear power plants for the supply of electric power, supervision, and the propagation of control signals. These low voltage tables must be inspected for safe and stable operation of nuclear power plants. In particular, the degradation diagnosis to estimate the integrity of low voltage rabies has recently been emphasized according to the long use of nuclear power plants. In order to evaluate their degradation, the surrounding temperature, hardness of insulation material, elongation at breaking point (EAB), etc. have been used. However, the measurement of temperature or hardness is not useful because of the absence of quantitative criteria; the inspection of a sample requires turning off of the power plant power; and, the electrical inspection method is not sufficiently sensitive from the initial through the middle stage of degradation. In this research, based on the theory that the ultrasonic velocity changes with relation to the degradation of the material, we measured the ultrasonic velocity as low voltage cables were degraded. To this end, an ultrasonic degradation diagnosis device was developed and used to measure the ultrasonic velocity with the clothing on the cable, and it was confirmed that the ultrasonic velocity changes according to the degradation of low voltage cables. The low voltage cables used in nuclear power plants were degraded at an accelerated rate, and EAB was measured in a tensile test conducted after the measurement of ultrasonic velocity. With the increasing degradation degree, the ultrasonic velocity decreased, whose potential as a useful parameter for the quantitative degradation evaluation was thus confirmed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.1
• /
• pp.32-48
• /
• 2018

The mechanisms of $CH_4$ uptake into and release from the ocean are not well understood due mainly to complexity of the biogeochemical cycle and to lack of regional-scale and/or process-scale observations in the marine boundary layers. Without complete understanding of oceanic mechanisms to control the carbon balance and cycles on a various spatial and temporal scales, however, it is difficult to predict future perturbation of oceanic carbon levels and its influence on the global and regional climates. High frequency, high precision continuous measurements for carbon isotopic compositions from dissolved $CH_4$ in the surface ocean and marine atmosphere can provide additional information about the flux pathways and production/consumption processes occurring in the boundary of two large reservoirs. This paper introduces recent advances on optical instruments for real time $CH_4$ isotope analysis to diagnose potential applications for in situ, continuous measurements of carbon isotopic composition of dissolved $CH_4$. Commercially available, three laser absorption spectrometers - quantum cascade laser spectroscopy (QCLAS), off-axis integrated cavity output spectrometer (OA-ICOS), and cavity ring-down spectrometer (CRDS) are discussed in comparison with the conventional isotope ratio mass spectrometry (IRMS). Details of functioning and performance of a CRDS isotope instrument for atmospheric ${\delta}^{13}C-CH_4$ are also given, showing its capability to detect localized methane emission sources.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.339-353
• /
• 2003

The rapid increase in food borne illness outbreaks in Korea has been one of the major threats to the Nation's Health. Foodservice establishments have been identified as the major place for these outbreaks, mainly due to the lack of sanitary management and sanitary facility management practices. The purposes of the study were to develop hospital foodservice facility evaluation tools, based on the general HACCP-based standards and guidelines, for hospital food service establishments, to ensure the safety of these foodservices and to reduce the risk of food home illness. The scope of this study included: 1) an assessment of the current foodservice sanitation practices and managements for 6 general hospitals, with more than 400 beds, and 3 general hospitals, with less than 400 beds; 2) the development of foodservice establishments sanitation evaluation tools and sanitation standards, based on the HACCP system. The survey data showed varied results between the hospitals surveyed. Most of the hospital foodservice operations had many problems with ventilation and the plumbing. The total dimensional mean scores for the hospitals with more than 400 beds and less than 400 beds were 31.5 and 27.0, respectively. The highest dimension scores were for the water supply facility and lighting, with the lowest for insect and rodent control and toxic materials management. The levels of the mean scores were very low, especially for the general hospitals with less than 400 beds. These low mean scores may have arisen from critical problems within the hospital foodservice operations. The most needed facility management items for improvement were: storage shelf should be spaced 6 inches from the floor and walls, the use of three compartment sinks, utility sinks and cleaning facilities, with a floor drain for cleaning mops or liquid wastes, a ventilation hood designed to prevent dripping onto food, cooking facilities should be disassembled for washing and sanitizing, a separated hand washing sink and a sanitized food board for each area should be provided, all toxic material must have warning labels attached, and be stored in an area away from food preparation under padlock. The evaluation tool consisted of 14 dimensions, with 65 check-off items. The results of this study will provide basic facilities' guidelines to regulators, or foodservice industry personnel, wishing to build, or expend, and establish an efficient flow of food. As a result, food borne illnesses will be effectively prevented, and the Nation's health will be promoted for the development of their own sanitation standards, with a checklist for the safe production of foods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.71-71
• /
• 2018

Sea pollution accidents have been occurred due to the increase of marine ship traffic. Oil spill from the hull hole induced by tanker collision results in the huge sea pollution. Proper and prompt reaction on such oil spill disaster is needed to minimize the damage. Thru-hull emergency wood plug is typically used to manually close small holes, while it is required to develop some mechanical devices for closing large holes in the hull due to huge fluid pressure. Accurate estimation of oil discharge and velocity from such holes are important to develop proper device to control hull hole damage. High resolution CFD modeling investigation on the configurations of hull hole of 7.5 m initial depth and 30 cm diameter, which was observed in the oil spill accident of the Hebei Sprit off the west coast of Korea in 2007, has been carried out to compute the oil spill velocity distribution in terms of flow depth. Friction loss due to the viscous flow and the discharge coefficient of crude oil with specific gravity SG = 0.85 and viscosity of $4-12cP(mPa{\cdot}s)$ at the temperature of $20^{\circ}C-100^{\circ}C$ are presented in terms of Reynolds number based on the results of high-resolution CFD modeling.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.76-89
• /
• 2018

The distribution of the combined heat and power system is active as a solution to the instability of energy supply and environmental pollution caused by continuous industrial development. In Korea, the safety standards for combined heat and power system using a gas engine are insufficient therefore the study on this is needed. In this study, the safety performance and structural/material assessment items of domestic and international standards applied to the combined heat and power system were analyzed to carry out a standardization study on safety performance applicable to 20 kW gas engine combined heat and power system. In addition, the safety performance assessment (plan) of the gas engine combined heat and power system was derived by performing risk analysis and risk assessment using HAZOP. Assessment items include engine ignition systems related to safety performance, piping tight performance, watering and temperature rise performance, combustion performance, electrical efficiency, thermal efficiency, overall efficiency and humidity performance. Gas and water pipes, gas control and shut-off valves, durability, heat resistance, and cold resistance of metal or non-metallic materials related to the structure and materials of the gas engine combined heat and power systems.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.35-78
• /
• 2011

This study is intended to recommend for acquisition methods of the theatre collection. Theatre activities is representative of the performing arts, and the Korea theatre history start from the modern history of Korea. In the meantime, theatre collections has already been lost by a lack of effort and management, and scattered most of the collections. In particular, a one-off nature and volatility of theatrical performances make future generations to enjoy the performances and to study should consult the relevant records. Therefore, collecting records can be very serious mission. In this study, theatre collections of the country which aims to collect and analyze the characteristics and type of theatre collections. Based on this information, collection scope, targets, priorities, acquisition level, method of collecting are proposed the following. First, collection scope is defined for the theatre related collections which was performed nationwide in the 1900s, the times that modern theatre was begun. The object includes related information of planning, administration, drama (script), directing, stage design, public relations, production, evaluation, personal records, biographical data, group data and space data. Second, the theatre collections are divided into records and historical records. Priority of collections object is determined by the historical value and the theatre performed by the support of public organization. Third, the acquisition level is divided into archived, mirrored, web linked and database, which is proposed by the determined levels of mandatory, recommend and discretion according to the characteristic of performance. Fourth, acquisition methods are suggested by the general acquisition methods of transfer, donation and purchase as well as the methods of copy, production, legal deposit, entry and web link etc. The acquisition of theatre collections is executed on digital-based environment, and a centralized authority control should be establishmented. And through the development of network with theatre's stakeholders and the cooperation of related organizations, theatre collections acquisition is feasible.

• 한국사회정책
• /
• v.20 no.2
• /
• pp.233-260
• /
• 2013

Despite various policies have been implemented to curb shadow education in Korea, it has continued to grow in recent two decades. This study investigates the expansion mechanism of shadow education focused on mobilization capabilities and market strategies of the suppliers. The success and failure of policy toward shadow education depends on how effectively it could block off the way by which the suppliers as the most important actors in politics of shadow education market mobilize consumers' anxieties. But shadow education policies have failed in two points. First, they have lacked honest intention to stop its proliferation. The Constitutional Court Decision Against Anti-Out-Of-School Classes Legislation of 2000 widened the windows of opportunity for the suppliers, and 5.31 educational reform of 1995 was neutral to their mobilization capabilities, though seemingly designed to control shadow education. This policy orientation, which reflected neoliberal Gesinnungsethik defective of Verantwortungsethik, stimulated shadow education to expand in that suppliers' mobilization capabilities were reinforced or remained intact. Second, shadow education suppliers have succeeded in mobilizing the desire and anxiety of potential consumers. To cope with government's policy including improving the qualities of public education, realignment of college entrance systems, and meeting the shadow education needs, they have developed various market strategies such as management of existing demands, creation of responsive demands, and squeezing out new demands. They have succeeded in nullifying policies by employing or mixing strategies with effect. Policy decisions in the future need to be made with reference to Verantwortungsethik, and be more cautious to socio-political contexts of Korea, to mobilization capabilities and market strategies of the suppliers in particular.