• Archives of Pharmacal Research
• /
• 제22권2호
• /
• pp.189-193
• /
• 1999

Reversed-phase high-performance liquid chromatography/mass spectrometry (HPLC/MS) with an eletcrospray ionization (ESI) interface was applied to the identification of metabolites of IY81149 in the rat plasma. Fragments obtained using collision-induced dissociation (CID) in both positive and negative modes were utilized to elucidate the structure of metabolites. The eluent from the conventional HPLC column was split and directly introduced into an ESI-mass spectrometer for the identification of the structures. the CID technique allowed the sensitive identification of sulfonyl-IY81149 and hydroxy-IY81149 from the rat plasma.

• Anatomy and Cell Biology
• /
• 제56권3호
• /
• pp.322-327
• /
• 2023

The aim of this study was to elucidate the intramuscular arborization of the teres minor muslce for effective botulinum neurotoxin injection. Twelve specimens from 6 adult Korean cadavers (3 males and 3 females, age ranging from 66 to 78 years) were used in the study. The reference line between the 2/3 point of the axillary border of the scapula (0/5), where the muscle originates ant the insertion point of the greater tubercle of the humerus (5/5). The most intramuscular neural distribution was located on 1/5-3/5 of the muscle. The tendinous portion was observed in the 3/5-5/5. The result suggests the botulinum neurotoxin should be delivered in the 1/5-3/5 area of the teres minor muscle.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3111-3111
• /
• 2001

The implementation of NIR and chemometrics in the Pharmaceutical industries is still in strong progress, both regarding qualitative and quantitative applications and beneficial results are seen. Looking at the development so far, NIR will change the pharmaceutical industry even more in the future. This presentation will address the experiences and progress achieved regarding the application and implementation of quantitative methods for determination of content uniformity and assay of tablets with less than 10% w/w of active, using Near Infrared transmittance spectroscopy in combination with PLS. Also qualitative methods for identification of the same tablets by Near Infrared reflectance spectroscopy will be discussed. Four commercial tablet strengths are formulated and produced from two different compositions by direct compression. Three different strengths are dose proportional, i.e. fixed concentration by varying in size. The aim was to replace the conventional primary methods for analysing content uniformity, assay and identification by NIR. Studies were performed on comparing transmittance versus reflectance spectroscopy for both applications on the dose proportional tablets. The model for determination of content uniformity and assay was developed to cover both coated and uncoated tablets, whereas the qualitative model was developed to identify coated tablets only. The impact of the tablet formulation, tablet size and coating, resulted in individual models far each composition The best calibration was achieved using diffuse reflectance for the identification purposes and diffuse transmittance for the quantitative determination of the active content within the tablets. As NIR in combination with other techniques opens up the possibility of total quality management within the production, the transfer of the above-mentioned models from a laboratory based approach to an at-line approach at H.Lundbeck will be addressed too.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.695-703
• /
• 2017

In order to satisfy the urgent requirements for the overheating protection of induction motors, an approach that can be used to identify motor temperature has been proposed based on the rotor slots harmonic (RSH) in this paper. One method to accomplish this is to improve the calculation efficiency of the RSH by predicting the stator winding distribution harmonic order by analyzing the harmonics spectrum. Another approach is to increase the identification accuracy of the RSH by suppressing the influence of voltage flashes or current surges during temperature estimation based on model predictive control (MPC). First, an analytical expression of the stator inductance is extracted from a steady-state positive sequence motor equivalent circuit model developed from the rotor flux field orientation. Then a procedure that applies MPC for reducing the identification error of the rotor temperature caused by voltage sag or swell of the power system is given. Due to this work, the efficiency and accuracy of the RSH have been significantly improved and validated our experiments. This work can serves as a reference for the on-line temperature monitoring and overheating protection of an induction motor.

• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.109-118
• /
• 2024

The world today is advancing towards a digital solution for every indusial domain varying from advanced engineering and medicine to training and management. The supply cycles can only be boosted via an effective management of the warehouse and a stronger hold over the logistics and inventory insights. RFID technology has been an open source tool for various MNCs and corporal organization who have progressed along a considerable drift on the charts. RFID is a methodology of analysing the warehouse and logistic data and create useful information in line to the past trends and future forecasts. The method has a high tactical accuracy and has been seen providing up to 99.57% accurate insights for the future cycle, based on the organizational capabilities and available resources. This paper discusses the implementation of RFID on field and provides results of datasets retrieved from controlled data of a practical warehouse and logistics system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.87-94
• /
• 2006

교량의 설계 및 시공에 있어 적절한 설계하중을 산정하기 위해 차량의 하중을 측정하는 것은 매우 중요하다. 본 논문에서는 이동하중에 대해 다축의 모멘트 영향선을 이용하여 시간에 따라 하중을 식별하는 알고리듬을 제안하였다. 또한 2개 이상의 하중을 식별하는 경우, 시간에 따른 하중 식별 결과가 심한 진동을 하기 때문에 밀도추정함수를 통해 최종 식별하중을 구하는 방법을 제안하였다. 단경간 판형교에 대한 수치예제를 수행하여 제안한 알고리듬 및 방법들을 검증하였다. 수치예제에서는 계측오차와 속도오차에 대한 오차분석을 수행하였다. 또한 제안된 알고리듬을 6m 길이의 강재 모형교량을 이용한 실내실험을 통해 재검증하였다. 속도와 하중의 종류에 따라 하중식별 능력이 달랐으나 개발한 알고리듬이 최대 10% 수준의 오차 내에서 하중을 식별할 수 있음을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.436-439
• /
• 2004

Output data streams of the MSC contain flags, Headers and image data according to the established protocols and data formats. Especially the Header added to each data lines contain information of a line sync, a line counter and, ancillary data which consist of ancillary identification bit and one ancillary data byte. This information is used by ground station to calculate the geographic coordinates of the image and get the on-board time and several EOS(Electro-Optical Subsystem) parameters used at the time of imaging. Therefore, the EGSE(Electrical Ground Supporting Equipment) that is used for testing MSC has to have functions of interpreting and displaying this Header information correctly following the protocols. This paper describes the design of the header data processing module which is in EOS­EGSE. This module provides users with various test functions such as header validation, ancillary block validation, line-counter and In-line counter validation checks which allow convenient and fast test on imagery data.

• Fisheries and Aquatic Sciences
• /
• 제25권9호
• /
• pp.489-497
• /
• 2022

The first specimen (54.8 mm standard length) of Ernogrammus zhirmunskii Markevich & Kharin, 2011, belonging to the family Stichaeidae, was recorded in Dokdo, East Sea, Korea on July 26, 2021. This species was characterized by a single ventral lateral-line canal from the posterior margin of the pelvic-fin base extending to the anus and one or two rigid spines on the posterior part of the anal fin. This species is similar to Ernogrammus hexagrammus and Ernogrammus walkeri but differs in the number of ventral lateral-line canal present, with E. zhirmunskii consisting of one (unpaired) ventral lateral-line canal compared to other two Ernogrammus species, which have a pair of parallel ventral lateral-line canal. For further analysis of species identification, a partial gene sequence from the mitochondrial DNA cytochrome oxidase subunit I (554 bp) of E. zhirmunskii was obtained for the first time. This study documents the first record of E. zhirmunskii in Korean waters and proposes the new Korean name of 'Il-gob-julbe-do-la-chi' for the species.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1398-1402
• /
• 2007

In a high speed train, OBCS(On-Board Computer System) is a up-to-date computer control system that provide controlling, monitoring, maintaining and reparing of the important device, supporting a driver, status of a train, service maintenance, managing the remote control mode, driving order & control, control of a electrical or pneumatic circuit and a passenger service. In general, OBCS is located in each car but in a power car, both main and auxiliary computers are used. These avoid a network collision and maintain the independence of condition and failure records with the information of line number, train number and car number. This paper is intended to provide the information about the identification coding method of domestic and foreign OBCS, for the new high speed train (KTX-II).

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.130-140
• /
• 2003

This paper presents an $H_\infty$controller synthesis based on disturbance observer for the trajectory control of a hydraulic excavator. Compared to conventional robot manipulators driven by electrical motors, hydraulic excavator have more nonlinear and coupled dynamics. In particular, the interactions between an excavation tool and the materials being excavated are unstructured and complex. In addition, its operating modes depend on working conditions, which make it difficult to not only derive the exact mathematical model but also design a controller systematically. In this study, the approximated linear model obtained through off-line system identification is used as nominal plant model for a disturbance observer. A disturbance observer based tracking controller which considers the effect of disturbance and model uncertainty is synthesized in $H_\infty$frameworks. Simulation results are used to demonstrate the applicability of the proposed control scheme.