• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2844-2851
• /
• 2011

The purpose of this study is to set up an acoustic prediction technique and to perform the IL test of scale down noise reducing device for the development of the noise reducing device as the development of 400km/h class high speed train. First of all, the IL prediction of noise reducing device was performed with the 2D BEM method. And the noise test of scale down noise reducing device in anechoic chamber was performed for the verification of acoustic prediction technique and IL performance evaluation. As the results, the acoustic prediction technique for the development of noise reducing device was verified because the averaged IL difference between prediction and test is in 2dB(A). And the measured IL value of noise reducing device is less than 2dB(A), and additional IL with polyester absorption material is increased about 0.5dB(A).

• Phonetics and Speech Sciences
• /
• v.1 no.2
• /
• pp.31-36
• /
• 2009

This study attempted to examine the effects of a portable voice feedback device on the hyperfunctional voice behaviors of children with vocal nodules when they wore the device in their daily lives. The device could set fundamental frequency and intensity at optimal levels for the subjects, It produces an audible alarm for inappropriate hyperfunctional voices beyond the preset levels, In addition, the frequency of hyperfunctional voice behaviors was recorded by the device, therefore the users were able to chart their number of hyperfunctional voice behaviors per day, According to results acquired after having subjects wear the device for 12 weeks, the subjects' frequency of hyperfunctional voice behaviors decreased significantly (p < .01). Especially from the first to fourth week, the frequency of their hyperfunctional voice behaviors declined significantly.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.243-251
• /
• 2012

The purpose of this study was to develop an impact force measurement device in order to facilitate the acquisition of quantitative data for the analysis of various sporting events. The device was designed to include cylindrical aluminum supports of 220 mm diameter, which allows mounting and dismounting of the device on walls and frames. In addition, a hard sponge for impact absorption, as well as 4 springs, were attached to the plate. Both were attached to prevent psychological variables and injuries. When a subject applies force on the device, accurate data about the maximum repulsive force is acquired in real time, with a lag of only 0.001 s. The device was calibrated in four steps: (1) increase, (2) increase, (3) increase-decrease, and (4) increase-decrease. The maximum relative expanded uncertainty was 0.166%, indicating that the impact force measurement was sufficiently reliable. The proposed device can be applied to various sporting situations and is expected to be useful for studying kinetics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1622-1624
• /
• 2007

In order to realize effective p-type doping in ZnO thin films, ZnO films were deposited on P-doped Silayers by RF-magnetron sputter deposition technique and annealed at various temperatures. The result indicated that ZnO film annealed at $700^{\circ}C$ showed p-type conduction with a high carrier concentration in the order of $10^{19}\;cm^{-3}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1239-1242
• /
• 2006

Scintillation that is grainy patterns appeared on a screen has been one of a biggest issues in a rear projection TVs. In this paper, with focusing on the average size of random particle, it was proved that the particle size of calculated speckle and the one of measured scintillation are almost the equal. This result shows speckle phenomenon is an important factor of scintillation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.14-15
• /
• 2007

Proton irradiation technology was used for improvement of switching characteristics of the PT-IGBT. The proton irradiation was carried out at 5.56 MeV energy from the back side of processed wafers and at 2.39 MeV energy from the front side of the wafers. The on-state and off-state I-V characteristics and switching properties of the device were analyzed and compared with those of un-irradiated device and e-beam irradiated device which was conventional method for minority carrier lifetime reduction. The proton irradiated device by 5.56 MeV energy was superior to e-beam irradiated device for the on-state and off-state I-V characteristics, nevertheless turn-off time of proton irradiated device was superior to that of the e-beam irradiated device.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.199-204
• /
• 2000

A cylindrical brake device with plastic deformation is designed to stop the object moving at high velocity. Baseline model is determined based on the design specification and analytic solutions. Using finite element method, effects of various design parameters, such as thickness of the cylinder, clearance between cylinder and rod, and cone angle, to the performance of the brake device are investigated. Cone-type brake device shows better performance than cylindrical brake device with constant thickness in that plastic hinges are generated sequentially from impact end to fixed boundary, thus increasing the reliability of braking operation.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.211-215
• /
• 2023

In this paper, the stability and effectiveness of the force control with a 6-axis compliance device are verified by performing comparative experiments with a commercial F/T sensor. The position/force control algorithm based on the Cartesian stiffness of a compliance device is briefly introduced and the design result of a 6-axis compliance device with F/T sensing is presented. The comparative experiments show that the force control using a compliance device is much more stable than that with rigid F/T sensor due to the enough compliance of a compliance device larger than robot positional resolution.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.209-210
• /
• 2023

A panic device is a type of door lock that opens when pressed or pushed by the body, so it is an emergency escape device designed to easily open the door and escape in an emergency situation such as fire or earthquake. It is an ideal door handle for an emergency exit. Because many people move quickly and it is easy to use, it is common in Europe and North America, but in Korea, the product is expensive, so it is used on a limited basis in luxury buildings such as hotels, but its use is gradually increasing. East Asian countries such as Korea, China, and Japan mainly prefer the North American type. The design of the penic device used in is a uniform and universal design, and research and development of a new design of the penic device was required to develop a new design type product considering the aesthetics of the building.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.234-237
• /
• 2000

In this paper, a method to implement new Quasi-SOI LDMOSFET is introduced and the electrical characteristics of the device are studied. Key process steps of the device are explained briefly. By performing process and device simulations, electrical characteristics of the device are investigated, with emphasis on the optimization of the tilt angle of p$\^$0/ channel region. The electrical properties of the Quasi-SOI device are compared with those of bulk and SOI devices with the same process parameters. Simulated device characteristics are threshold voltage, off-state leakage current, subthreshold swing, DIBL, output resistance, lattice temperature, I$\_$D/-V$\_$Ds/, and cut-off frequency.