• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.168-169
• /
• 2005

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2235-2239
• /
• 2003

The aim of this research is to study and develop enabling technologies for home healthcare device with ubiquitous network. The motivation of this paper is to enable healthcare in home, to development the device for smart home health care. To achieve the aim, we must develop the prototype platform based on home gateways, distributed context user interface based on UPnP and support for information sharing with high speed power line communication and mobile infra-structures. And IPv6 is the base technology of this platform. In this paper, we concern that physical health, mental health and medical emergencies is all of home healthcare. With the smart device, we evaluate the connectivity, automatic information extraction and private data exchange and event driven message. The result of this paper is demonstration of smart device for ubiquitous communication in a healthcare application such as patient monitoring device and several information services. In conclusion, home healthcare will support more healthy and easy living for a human.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.204-209
• /
• 2016

The analyses on self-heating effect in 7 nm node non-rectangular Bulk FinFET device were performed using 3D device simulation with consideration to contact via and pad. From self-heating effect simulation, the position where the maximum lattice temperature occurs in Bulk FinFET device was investigated. Through the comparison of thermal resistance at each node, main heat transfer path in Bulk FinFET device can be determined. Self-heating effect with device parameter and operation temperature was also analyzed and compared. In addition, the impact of interconnects which are connected between the device on self-heating effect was investigated.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.105-112
• /
• 2018

The purpose of this study is to develop an application that supports a user in the maintenance of small photovoltaic device. To this end, this study analyzed the maintenance status, related regulations and existing application contents in Korea. According to the analysis results, most users did not maintain device for themselves. In addition, the maintenance market has not been activated due to its low profitability. Regulations on the maintenance of photovoltaic device prescribed by the KESCO and Japanese counterpart were analyzed to establish the standards for photovoltaic device inspection, and an application was developed based on the existing applications and research results. In order to evaluate the completeness and satisfaction of the developed application, it surveyed 52 users and 22 experts. The survey results showed that the completeness was calculated to be 90 points, and the level of satisfaction was 93 points on a 100-point scale. Therefore, it is expected that the maintenance application developed in this study will be useful for users to maintain the photovoltaic device.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1440-1444
• /
• 2011

Memory-device is one of the auxiliary components of point-switch machine; connecting front-rod and tongue-rail. The right side and left side of memory-device are different from each other. When there would be a derailing accident of rolling stock or motor-car, the memory-device properly bends and protects the internal of point-switch machine. Memory-device is one of the important site maintenance spare parts. Memory-device for each of right and left side should be secured so that they can be installed on correct side during an exchange work. This study suggests the development of memory-device with different left and right side and the performance test of it. The study intends to contribute in the convenience improvement of maintenance by improving the unification of memory-device.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.321-327
• /
• 2009

This paper studied the influences of the main design parameter-the expansion angle and the material properties of the self-expansion anterior cruciate ligament fixation device on the contact condition with the bone and the initial stability of the device. Using finite element analysis, the stress distributions of the ring part of the device and the wall of the bone tunnel were calculated. And the micro-migration of the device by the pull-out force was calculated. From the analysis results, it was found that when designing the self-expansion type anterior cruciate ligament fixation device, it is desirable to use the material having higher Young's modulus and to design the fixation device that all wedges uniformly maintain contact with bone to obtain initial stability after operation.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.409-412
• /
• 2007

Demand for the technology for access to device control network in industry and for access to building automation system via internet is on the increase. In such technology integration of a device control network with a data network such as internet and organizing wide-ranging DCS(distributed control system) is needed, and it can be realized in the framework of VDN(virtual device network). Specifications for device control network and data network are quite different because of the differences in application. So a router that translates the communication protocol between device control network and data network, and efficiently transmits information to destination is needed for implementation of the VDN(virtual device network). This paper proposes the concept of NCS(networked control system) based on VDN(virtual device network) and suggests the routing algorithm that uses embedded system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.733-739
• /
• 2005

Device Description that is described as C-based DDL(Device Description Language) should be provided for the control system to use the progressive function of field device in the distributed control system. DD expresses field device function itself and parameter. DD is used to set a necessary function far a control strategy in the central control system. DD technology which was adopted as international standard IEC 61804-Part 2 is being used in PROFIBUS, Foundation Fieldbus and HART. However, the DD is dependent to the fieldbus and it doesn't have a suitable form in the industrial Ethernet. This paper presents the possibility of a change from EDD(Electronic Device Description) and GSD(General Slave Data) used for integrating field devices to XDD(XML for Device Description) and verifies it's effectiveness. Also, this paper presents research assignment on the XML application in the distributional system from now on by examining the possibility of Ethernet`s development in the industrial area.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.181-194
• /
• 2012

The one of the most meaningful change in the recent ubiquitous environment is the omnipresence of public digital display device for providing ubiquitous information. It is the important issue to provide publicity as well as adaptive information to each user in the field of the public digital display device. This research proposes the idea ensuring fast response speed by the selection of user preference function. The preference function is selected by statistics using Zipf distribution in the system comprising mobile device and digital display device based on NFC (Near Field Communication). The idea is proved by CPM-GOMS model and the improvement of user response can be achieved.

• Journal of Korea Multimedia Society
• /
• v.25 no.9
• /
• pp.1307-1315
• /
• 2022

In this paper, we proposed and developed a new portable skin elasticity measuring device based on the indentation method using piezoelectric effect. The proposed device is designed to minimize the uncertainty caused by the layer structure of the skin when measuring the elasticity of the skin. And, we developed a piezoelectric-based thin-film pressure sensor that can measure quantitatively and quickly during repeated measurement as a device sensor. To confirm the effectiveness of the proposed measuring device, it was compared with the experimental results of the conventional measuring devices under the same experimental conditions, and statistical correlation analysis was performed between the experimental data of the proposed measuring device and the experimental data of the conventional measuring devices. As a result of the correlation analysis, it was confirmed that the proposed measuring device had a high correlation with the conventional measuring devices. Therefore, it was confirmed that the proposed skin elasticity measuring device was effective.