• Journal of Information Processing Systems
• /
• 제13권6호
• /
• pp.1459-1466
• /
• 2017

Recently, the development of the smart home field provides a range of services to install and keep the smart home appliance in a user's residential environment pleasantly. However, the conventional system method is not convenient enough to use properly because users have to select a device and manually operate the device on their own. In this paper, we propose a system to set the priority of the devices selected by the user and proceed with the task. When a user selects a device, the system recommends an optimal device associated with the device. The system compares and sets the priority of each device, carrying out the task one by one according to the set priority. Therefore, the proposed system is expected to provide users with increased convenience and more efficient task management.

• 한국통신학회논문지
• /
• 제32권6B호
• /
• pp.325-333
• /
• 2007

설계된 HW IP를 응용수준에서 제어하기 위해 OS상에서의 디바이스 드라이버가 요구된다. 디바이스 드라이버의 개발은 하드웨어와 OS에 대해 시스템 개발자의 정확한 이해가 필요하며 하드웨어 개발 기간과 비용의 많은 부분을 차지한다. 본 논문에서는 OS정보, 하드웨어 특징정보를 이용하여 OS에 따른 디바이스 드라이버를 인터페이스 회로와 함께 자동 생성하는 시스템의 구축에 대해 제시한다. 제안한 시스템에서는 효율적인 디바이스 드라이버 자동생성을 위해 디바이스 드라이버의 기본골격과 함수 모듈 코드, 헤더파일 테이블 등을 라이브러리로 구축하여 입력 데이터에 따라 선택되어 디바이스 드라이버가 자동생성 되도록 하였다. 제안된 방법으로 ARM922T 코어에 삼성 3.5인치 TFT-LCD를 장착하여 커널버전 ARM-Linux 2.4.19를 탑재한 후 디바이스 드라이버를 자동 생성하여 커널에 등록한 뒤 하드웨어에 write 연산을 실행하는데 걸린 시간을 비교한 결과 매뉴얼로 설계한 디바이스 드라이버에 비해 1.12%의 감소를 보였다. 커널 컴파일 후의 코드 사이즈는 0.17%의 증가를 보였다. 생성된 디바이스 드라이버는 응용프로그램 레벨에서 하드웨어를 제어할 때 발생하는 지연시간을 고려하면 실제 성능의 차이가 없음을 보인다. 본 논문에서 제안한 시스템을 사용하여 시스템 개발기간을 단축할 수 있다.

• 한국임상수의학회지
• /
• 제14권1호
• /
• pp.56-64
• /
• 1997

These studies were performed to investigate the complications affecting the vision after extracapsular lens extraction(ECE), the effects of an I/A (irrigation & aspiration)device and a viscoelastic material used on the vision, the occurrence of complications and the effective corneal incision method to reduce the corneal opacity in dogs. ECE was performed bilaterally with 3 different methods using clinically normal twele mixed dogs; the method in which I/A device and viscoelastic material were not used, the method in which I/A device was used but viscoelastic material not, and the method in which I/A device and viscoelastic material were used. Postoperative complications were observed as followed; conjunctival injection, uveitis, corneal opacity due to endothelial cell loss, hyphemia, remnants of lens cortex, vitreous loss, synechia and capsular opacity. Preservation rate of vision was lower significantly in the cases showing signs of synechia, capsular opacity, or remnants of lens cortex than the cases not showing the above signs(p<0.01). There were significant reduction of the complications such as corneal opacity, clot in anterior chamber in the group using I/A device compared to the group in which I/A device was not used(p<0.01). Groups using I/A device showed slightly higher vision than the group not using I/A device (75%; 42%). There were no significant differences in the occurrence rate of complications and the preservative rate of vision between the groups with and without viscoelastic material. The present study indicated that the postoperative complications of posterior synechia, capsular opacity, uveitis and vistreous loss were important factors affecting the vision and that I/A device was applicable to extract the lens cortex and effective to elevate the success rate after ECE in dogs.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.147-154
• /
• 2005

The improved hitch device, which connecting the trailer to power tiller, was developed. This device, composed with spring and rubber, could reduce the vibration and shock levels during driven on off-road. The vertical vibration accelerations for the improved hitch device were measured at 6 positions, i.e. engine, hitch, seat, and three points in trailer (front, middle, and rear) for not driving but at low engine speed of 500 rpm, and compared with the existing hitch device. The results of this study could be summarized as follows; The average vibration acceleration up to 120 Hz was $0.4m/s^2$ at engine part, but it was 0.08 and $0.05m/s^2$ at trailer for existing and improved hitch device, respectively. About $38\%$ of average acceleration level could be absorbed for the improved hitch device compared with existing hitch device. The average vibration acceleration up to 40 Hz was reduced to 0.12 and $0.06m/s^2$ at trailer for existing and improved hitch device respectively, showing the reduction effect of $50\%$. The maximum acceleration occurred at up to 20 Hz of low frequency was much higher than total acceleration occurred at up to 120 Hz, which means that much loss or damage could be occurred during transporting of agricultural products on off-road. The portions of average acceleration occurred at up to 20 Hz of low frequency were $27\%\;and\;21\%$ for the existing and improved hitch device, respectively.

• 대한의용생체공학회:의공학회지
• /
• 제44권1호
• /
• pp.73-79
• /
• 2023

The purpose of this study is to derive medical devices with different management systems through comparison of domestic and overseas medical device product classification systems and to propose management conversion measures for the products. The definitions of medical devices were compared and the scope of medical devices defined by each country was confirmed through surveys of the Medical Device Act, Federal Food, Drug & Cosmetics Act (FD&C) in the U.S., and Medical Device Regulations (MDR) in Europe. Using the Ministry of Food and Drug Safety's regulations on medical device products and grades, 21 CFR part 860-892 and product code classification files in U.S., and EMDN in Europe as basic data to compare medical device products and derive medical devices with different management systems. As a result of comparing the definition and product classification systems of medical devices in Korea, the U.S. and Europe, medical device accessories, prosthetic limbs and aids among assistive devices for persons with disabilities, drugs, quasi-drugs and industrial products that are not managed by medical devices in Korea are managed as medical devices in the U.S. and Europe. This study aims to improve public health by securing systematic product safety management and essential performance under medical device regulations. Management within a single medical device system will increase the efficiency of licensing work of domestic medical device manufacturers and related organizations. It is also expected to help advance the system according to the international harmony of the item classification system and enhance smooth import and export competitiveness.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.117-124
• /
• 2002

Fixed distance control system at the railway level crossing have some problem. The problem is especially serious for high speed or low speed train. Therefore present developed device is fixed time control system. But fixed time control system haven't indicate device when train reach at the railway level crossing on alarm. This paper' result in study for train reach spare time indicate device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.175-177
• /
• 2007

This paper is concerned with a performance analysis using a wired/wireless gateway based on DeviceNet. For the performance analysis, the data transmission time between DeviceNet and the wireless devices is investigated and analyzed. The experimental results show the perfom1ance in terms of the polling/COS service time and end-to-end delay.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.13-19
• /
• 2015

In this paper, the principle of devices which can magnify images without distorting the images is described. When the device is put on a smart phones, viewers can see the magnified images. Magnified images can be few 100 times bigger than the original images. Therefore, viewers can see movie theater size images with the device put on a smart phone. Two different schemes are explained in the paper and one realization of the device is presented. The device can be used in many different application areas.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2006년도 동계학술연구발표회 및 자성 스핀트로닉스 국제학술대회
• /
• pp.80-81
• /
• 2006

• 전자공학회지
• /
• 제42권7호
• /
• pp.45-53
• /
• 2015

Power 소자 기술은 digital & mixed signal device와 on-chip 구현을 위해서 CMOS 공정에 대한 기본 이해가 필요하다. CMOS 공정 기반 위에 power device 공정을 추가하면서 다양한 operation voltage의 power 소자를 구현하고, passive device 들을 동일 공정에서 구현하여 다양한 components 들로 power IC 제품을 design 할 수 있도록 modular process를 제공하는 것이 중요하다. 또한 power device로 주로 사용되는 LDMOS 소자에 대한 performance 개선을 위해 simulation을 통해 key device parameter들의 특성을 예측하고, 구조를 설계하는 것이 Si process 전에 중요한 일 중의 하나이다. 아울러 power management가 potable power, consumer electronics 및 green energy에서 가장 빠르게 성장하는 분야이므로, 차별화된 power 소자 기술을 확보하여 급변하는 시장 환경에 대응하는 것이 필요하다.