• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2534-2540
• /
• 2010

In this paper we propose contents and results on installation and commissioning test for ATP on-board unit, which has propelled as one of the research projects, so called, "Reliability assessment and operation technology development for Korean-type tilting trains" in order to ensure the safety and operation efficiency of tilting trains. In KRRI, we have developed tilting trains for the speed-up of existing lines and for the passenger service improvement where the KTX is not available. And we also make progress the operation trial test at the speed of 10km with the use of ATS units, used in existing lines, for the purpose of the reliability assessment of the developed tilting trains. In MLTM, they have decided to accelerate the speed at more than 200km/h for the 7 existing lines including Jungang-line and Chungbuk-line where KTX has not operated. According to this decision, Train control system is to be changed from ATS to ATP. We should install an ATP on-board unit in tilting trains and verify the operational suitability. Therefore, we have installed and tested the same ATP on-board unit on tilting trains that used in the ATP construction project on Gyeongbu-line and Honam-line.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.74-87
• /
• 2020

Overloaded trucks are the main source that threatens road safety and directly affects the reduction of pavement life. The On-board truck scale is the only equipment that could prevent overloading by measuring and adjusting the loading weight before driving. Legislation is needed to encourage its installation so that the driver can prevent overloading. In this study, an on-board truck scale system was installed on 30 dump trucks for transporting construction waste, such as soil and aggregates, which are major loads of 36.55% for overloading, and the trucks were monitored remotely. The overload prevention effect was analyzed by comparing driving data for 1 month before distribution of the weight display app that can recognize the weight to the driver and 1 month after distribution. After installation, overloading could be 6.1% reduced, and the transportation efficiency could be increased by checking the weight provided from the On-board truck scale system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2015-2022
• /
• 2012

This paper is about the analysis and design of avionics equipment's housing and PCB(Printed Circuit Board) such as air data computer. Avionics equipment's structural design as well as electrical properties is very critical and should be proved from design phase by analysis method. First, analyze the static load and vibration requirement for the installed equipment, and then proved it satisfy with its requirement using the computational structural analysis. Commercial tools were used for computation and the rib design of housing was verified and the placement of electrical component was proposed using the PCB's local displacement information.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1247-1252
• /
• 2004

ATC(Automatic Train Control) system employed in Bundang urban transit is operated in accordance with automatic blocking equipment. Using AF(Audio Frequency) track circuits installed at a block section, the block signal is automatically controlled and the safety of train operation is supported. In this paper, we investigate the operation mode of bundang urban transit and analyze the operation algorithm of ATC on-board system.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.227-228
• /
• 2004

궤도회로를 사용하지 않고 무선통신을 이용하여 지상-차상간 정보를 송수신하고 열차속도를 제어하는 CBTC 시스템에서, CBTC 차상장치와 추진제어장치와 제동제어장치, 출입문 개폐장치 등의 차량내 각종 차량제어장치들간의 인터페이스를 죄 적화하기 위한 방안에 대하여 검토하였다. 또한 현재 국가연구개발사업으로 추진중인 경량전철 신호제어시스템 개발에 적용하여, 시스템 최적화를 통한 시스템 설계 및 시험평가에 적용하였다.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.3
• /
• pp.142-147
• /
• 2010

We evaluated characteristics of ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold) surface treatment for mobile equipment that requires high reliability, in addition to investigating surface treatment processes for semiconductor boards that require high reliability such as regular PCB-package systems, board-on-chip, chip-scaled package (CSP), etc and application for semiconductor package board of SIP, BOC. As a result, it appeared that ENEPIG has superior properties compared to ENIG surface treatment in corrosion resistance, solder junction, wetting, etc. We anticipate that these results will be able to lend credibility to ENEPIG as a low-cost alternative for producing mobile devices such as the cell phones, especially when applied to mass production.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.233-236
• /
• 2005

Our country compares with advanced nations by supply of super high speed network and information communication infra construction has gone well very. Many people by extension of on-line transaction and various internet services can exchange, or get information easily in this environment. But, virus or poisonous information used to Cyber terror such as hacking was included within such a lot of information and such poisonous information are threatening national security as well as individual's private life. There were always security and speed among a lot of items to consider networks equipment from these circumstance to now when develop and install in trade-off relation. In this paper, we present a high speed VPN Acceleration Board(VPN-AB) that balances both speed and security requirements of high speed network environment. Our VPN-AB supports two VPN protocols, IPsec and SSL. The protocols have a many cryptographic algorithms, DES, 3DES, AES, MD5, and SHA-1, etc.. The acceleration board process data packets into the system with In-line mode. So it is possible that VPN-AB processes inbound and outbound packets by 10Gbps. We use Nitrox-II CN2560 security processor VPN-AB is designed using that supports many hardware security modules and two SPI-4.2 interfaces to design VPN-AB.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.757-766
• /
• 2005

A speed of a train is controlled by Automatic Train Control system and the continuous transmission system provide the speed related information in the Korean High Speed Line. The primary objective of this paper is to measure the level of continuous signal and to calculate the message of that signal. A measuring equipment is introduced and the equipment provide the base line of the level of current and the correction information of the message.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.2
• /
• pp.43-58
• /
• 2004

Up-to-date cargo transport system, CVO(Commercial Vehicle Operations) is the system to manage efficiently cargo distribution as providing at real time the information of cargo location and situation through ITS and GPS technology. In this paper, we proposed the Gate Automation System of harbors among AEI/AVI. To implement his system, we use the DSRC/RFID(Dedicated Short Range Communication / Radio Frequency IDentification) which adopts an wireless communication between RSE(Road-side Equipment) and OBE(on-Board Equipment) on a vehicle. When constructing the Gate automation system of harbors, the business application ability are reviewed practically and the logistics facilities to be constructed in the near future may use this project results according to the international standard and it could help complete integrated logistics system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.569-581
• /
• 1996

A microcomputer -based data acquistion system was designed and developed at Michigan State University , USA to conduct field data studies. The system designed for the research carried out used an Apple IIe microcomputer for collecting data on-board the tractor. An AII3 Analog to Digital (A/D_ convertor was chosen to interface each analog signal to the microcomputer. A commercially available Dj TPM II was employed to display information such as an engine speed, ground speed, percent drive wheel slip , distance travelled and area covered per hour. The frequency output from the radar unit was channeled through a frequency to voltage (F/V) convertor , so that AII3 Analog to Digital (A/D) convertor could read it. The fuel consumption was measured using on EMCO pdp-1 fuel flow meter attached to the engine fuel line. The draft of the tillage and other drag equipment was determined using strain gages attached to the drawbar of the tractor. The system was developed to collect the draft and fuel requirements for various farm equipment different kind of soils.