• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.308-312
• /
• 2001

This study was carried out to develop a basic form of planning hull type fishing boat. G/T 10ton class is selected as object hull form, and hull form is designed in Chosun University. A series of test results of LCG variations for S different LCG points are presented in this paper. The test was performed in Davidson Laboratory, and the scope of tests include resistance, trim and sinkage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.517-520
• /
• 2008

In this study, corrosion resistance of steel in cracked-reinforced concrete was performed according to experimental method. Mixed design is OPC, 30% PFA, 60% GGBS and 10% SF, respectively. Moreover, corrosion resistance test was measured using ultra testing machine for 0.3mm crack induction. The corrosion resistance of blended concrete shows the results following OPC > 10%SF > 30% PFA > 60% GGBS after 60days curing. In case of mass loss test, embedded reinforcement in OPC concrete surveyed the minimum corrosion and appeared better corrosion resistance than blended concrete. As a result, corrosion resistance of sound concrete is higher than cracked concrete. Moreover, corrosion resistance of binary concrete is lower than OPC.

• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.105-114
• /
• 2015

A long-term resistivity monitoring system has been developed for saturated cores in room temperature and humidity condition. A 3-channel water-pump continuously drops the water onto the top of saturated core sample surrounded by shrinkable tube as well as on the paper filters of the electrodes at both sides of the core sample, by which one can monitor the resistivity changes with maintaining full saturation of the rock core for a week or longer. Monitoring the resistivity changes has been performed with 3 kinds of rock samples including biotite gneiss, andesitic tuff, and shale for 9 days using the system. Consequently, it is proposed two hypothesis that conversion speed of temperature coefficient has close relation to the thermal properties of the rock sample and that the ratio of resistance between dry and saturated conditions for a rock sample can be related to the effective porosity of the sample. The ratio between dry and saturated resistance for the three rock types are 48, 705, and 2, while effective porosity was 3.7%, 3.3%, and 13.0%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.257-257
• /
• 2010

최근 저항 변화 메모리는 종래의 비휘발성 기억소자인 Flash memory보다 access time(writing)이 105배 이상 빠르고, DRAM과 같이 2~5 V 이하의 낮은 전압 특성 및 간단한 제조 공정 등으로 차세대 비휘발성 메모리 소자로 주목 받고 있지만, 여전히 소자의 Endurance 및 Retention 특성 등의 신뢰성 문제를 해결해야 할 과제로 안고 있다. 이러한 문제점들을 해결하기 위해 페로브스카이트계 산화물 또는 이원 산화물 등의 다양한 저항 변화 물질에 대한 연구가 진행되고 있다. 하지만, 현재 주로 연구되고 있는 금속 산화물계 물질들은 그 제조 공정상 산소에 의한 다수의 산소 디펙트 형성과 제작 시 쉽게 발생할 수 있는 표면 오염의 문제점을 안고 있다. 본 연구는 기존의 금속 산화물계 박막의 제조 공정에서 발생하는 문제점을 해결하기 위해 질화물계 박막을 저항변화 물질로 도입함으로써, 기존의 저항 변화 물질의 장점인 간단한 공정 및 저전압/고속 동작 특성을 동일하게 유지 할 뿐 아니라, 그 제조 공정상 발생하는 다수의 산소 디펙트와 표면 오염의 문제를 해결함으로써, 보다 고효율을 가지며 재현성이 우수한 메모리 소자를 구현 하고자 한다 [1, 2]. 본 연구를 위해 Pt/AlN/Pt 구조의 Metal/Insulator/Metal(MIM) 저항 변화 메모리를 제작 하였다. 최적의 저항 변화 특성 조건을 확인하기 위해 70~200nm까지 두께 구분과 N2 가스 분위기의 열처리 온도를 $200{\sim}600^{\circ}C$까지 진행 하였다. 본 소자의 저항 변화 특성 실험은 Keithley 4200-SCS을 이용하여 진행 하였다. 실험 결과, AlN의 최적의 두께 및 열처리 온도 조건은 130nm/$500^{\circ}C$였으며, 안정적인 unipolar 저항 변화 특성을 확인 활 수 있었다.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.455-462
• /
• 2006

In this paper, we used the electrical resistivity survey as a simple and reasonable technique to evaluate the effectiveness of grouting. And, a mechanism was also analyzed to understand how the electrical resistivity is affected by the loss of fine material in the core of a dam. From this mechanism, it was confirmed that electrical resistivity value of the damage section may be up or down depending on the survey conditions. This result seems to be contrary to the previous study that electrical resistivity of the damage zone become alway low. To clarify what was investigated, the electrical resistivity before and after grouting was compared and analyzed. As the result, it was concluded that grouting effectiveness was successfully assessed by electrical resistivity survey.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2000

Co-fired resistors for high frequency MCM-C (Multi Chip Module-Cofired) were fabricated and measured their RF properties from DC to 6 GHz. LTCC (Low Temperature Co-fired Ceramics) substrates with 8 layers were used as the substrates. Resisters and electrodes were printed on the 7th layer and connected to the top layer by via holes. Deviation from DC resistance of the resistors was resulted from the resister pastes, resistor size, and via length. From the experimental results, the suitable equivalent circuit model was adopted with resistor, transmission line, capacitor, and inductor. The characteristic impedance $Z_{o}$ of the transmission line from the equivalent circuit can explain the RF behavior of the buried resistor according to the structural variation.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.125-127
• /
• 2003

Lateral MCT(MOS-controlled thyristor)소자의 전기 적 특성 Parameters의 변화에 따른 스위칭 특성을 조사하였다. 제안된 Lateral 구조의 MCT는 채널과 drift영역의 제작과정이 간편하여 ON저항이 작으면서, 대전류용인 전력소자의 제작이 가능할 것으로 사료되는데, SPICE와 MEDICI 시뮬레이션을 이용하여 drift 저항, transit time및 불순물 농도 분포에 따른 전기적 특성을 알아보았다. 불순물의 농도와 채널길이의 변수에 의한 소자의 저항을 변화시켜 U 특성과 주파수 특성을 조사하였는데, 저항이 커질수록 turn-off 시간과 ON 저항은 증가함을 나타냈다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.4
• /
• pp.35-37
• /
• 1979

To investigate the genetic system in resistance to powdery mildew winter wheat cultivar Diplomat which has stable field resistance was crossed with high yielding susceptible winter type Caribo and Hayman's generation mean analysis technique was employed. Mildewing rate on flag-leaf at both heading-flowering and ripe stages were recorded according to lame's quantitative scale. The result indicated that additive gene effect was more important and significant role in the inheritance of resistance while dominant gene effect was minimum, and digenic interations were absent. Narrow sense heritability of resistance at ripe stage was higher than that of heading-flowering stage.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.911-917
• /
• 1996

Platinum thin films were deposited on Si-wafer by DC rnagnetron sputtering for RTD (resistance thermometer devices). We investigated the physical and electrical characteristics of these films under various conditions, the input power, working vacuum, temperature of substrate and also after annealing these films. The deposition rate was increased with increasing the input power but decreased with increasing Ar gas pressure. The resistivity and sheet resistivity were decreased with increasing the temperature of substrate and the annealing time at 1000.deg. C. At substrate temperature of >$300^{\circ}C$, input power of 7 w/cm$^{2}$, working vacuum of 5 mtorr and annealing conditions of 1000.deg. C and 240 min, we obtained 10.65.mu..ohm..cm, resistivity of Pt thin films and 3800-3900 ppm/.deg. C, TCR(temperature coefficient of resistance). These values are close to the bulk value. These results indicate that the Pt thin films deposited by DC magnetron sputtering have potentiality for the development of Pt RTD temperature sensor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.294-303
• /
• 1999

Resistance spot welding is commonly used for welding products of high quality because of clean welding and short w welding-time. But. conventional spot welders bring about the depreciation of welding products, iuespective of dynamic r resistance characteristics during welding time. This paper discussed dynamic resistance database implementation in t terms of welding performance improvement. On different welding conditions, we compared dynamic resistance, r respectively, about pure iron and Sn-Pb alloy on Copper. Also, it investigated the relation of tensile shear strength and d dynamic resistance in welded workpiece.