• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2013

The capacity of a pressure fan can be designed based on the air flow resistance of containers packed with fruits and vegetables in a pressure cooling system. This study was conducted to develop an air flow resistance model that was dependent on changes in the air flow rate and the method of stacking containers. The air flow resistance of a container packed with uniformly shaped balls was 1.5 times greater than the sum of the air flow resistance of a vacant container and that of a wire net container packed with only balls. In addition, the air flow resistance increased exponentially as the width of the stacks increased; however, the air flow resistance did not increase greatly as the length and height of the stacks increased, which indicates that the air flow resistance is primarily influenced by the width of the stack in the air flow direction. The air flow resistance in two lines of stacking was up to 17% less than that of the width of the stack. It was also possible to determine the air flow resistance using a function of the air flow resistance through a single container and develop a prediction model. A prediction model of air flow resistance that is dependent on the stacking method and the air flow resistance of a single container was developed.

• Information Systems Review
• /
• v.24 no.1
• /
• pp.125-155
• /
• 2022

Platform contrasts with traditional industry in terms of innovativeness as it is rapidly developing with information technology. To redeem preceding researches which have separately focused on either platform acceptance based on technology acceptance model or resistance factors against platform's innovation, this study applied dual factor theory to check the simultaneous influence of enablers and inhibitors on resistance. This study chose purchasers of online used trading platform as a subject of study since it contrasts with other platforms in many characteristics. Based on preceding studies, the moderating effects of their past purchase numbers on the relations between resistance and use intention were also checked. The findings reveal that economic benefit as an enabler had significant negative influence on the resistance, but social influence didn't have expected influence. In case of inhibitors, both perceived complexity and perceived risk had significant positive influence on the resistance. Though resistance had significant negative influence on the use intention, its influence was moderated into the positive direction as users' purchase number increased. Lastly, resistance had mediation effect between antecedent factors (economic benefit and perceived complexity) and use intention.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.918-940
• /
• 2021

In this study, the concept of eXtended Reality Devices(XR) is defined, how it is applied by industry and how it will develop in the future, and based on the expanded integrated technology acceptance theory and innovation resistance, We tried to confirm through empirical analysis how the influencing variables affect. We carry out the analysis of the hypotheses using PLS Structural Equation Modeling. According to the empirical analysis results, this study confirms that innovativeness has a significant effect on UTAUT2's acceptance variables(performance expectation, effort expectation, hedonic motivation, price value) for XR devices, and these variables affect attitudes and acceptance of XR. and the pace of change of XR has a significant effect on perceived risk, and the perceived risk perceived by consumers mediates the pace of change and innovation resistance, and has a significant effect on innovation resistance. and innovation resistance to XR devices had a significant negative effect on acceptance. This study has its meaning because it found out that it deals expansively and comprehensively with personal innovation, the UTAUT2's acceptance variables, and the effects of perceived risk factors mediating the pace of change and resistance to innovation. In addition, it suggests that in order for innovative technologies such as XR to advance to the stage of market expansion, it is important to present strategies to reduce resistance to new technologies as much as the value to be provided to consumers.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.82-89
• /
• 1997

Dependence of magnetoresistance on the thickness of Cu, type and thickness of buffer layer, and the stacking number of multilayer in the form buffer /$[Co(17{\AA}/Cu(t{\AA})]_{20}$ were investigated. To evaluate effect of annealing on this samples, X-ray diffraction analysis, vibrating sample magnetometer analysis, and magnetoresistance measurement (4-probe method) were performed. The magnetoresistance ratio exhibits a maximum of 21% for the multilayer with Cu thickness of 24$\AA$ and Fe buffer layer thickness of 50$\AA$. Deposition of film under low base pressure induces in increase magnetoresistance ratio by preventing oxidation. The multilayer annealed below 30$0^{\circ}C$ temperature allowed larger textured grain without loss in the periodicity. Magnetoresistance ratios of the multilayer with Cu thickness of 24$\AA$ and 36$\AA$ were increased due to the increase in the antiferromagnetically coupled fraction after annealing.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.27-34
• /
• 2017

We investigated the feasibility of parylene F usage as an intermediate layer between a polydimethylsiloxane (PDMS) substrate and an Au thin-film interconnect as well as the swelling effect of PDMS substrate on the stretchable deformability of an Au thin film. The 150-nm-thick Au film, which was sputtered on a PDMS substrate without a parylene F layer, exhibited an initial resistance of $11.7{\Omega}$ and an overflow of its resistance at a tensile strain of 12.5%. On the other hand, the Au film, which was formed with a 150-nm-thick parylene F layer, revealed an much improved resistance characteristics: $1.21{\Omega}$ as its initial resistance and $246{\Omega}$ at its 30% elongation state. With swelling of PDMS substrate, the resistance of an Au film substantially decreased to $14.4{\Omega}$ at 30% tensile strain.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.211-217
• /
• 2003

Recently, with rapid development in marine and shipbuilding industries such as marine structures, ships and chemical plants for ship, there occurs much interest in the study on corrosion characteristics played an important role in mechanical design. This paper was studies on the corrosion characteristics of chromium plating in the marine environment. Under the various specific resistance, the electrochemical polarization test of chromium plating was carried out. And thus corrosion potential, polarization resistance, corrosion current density, control efficiency of corrosion and polarization control behavior of chromium plating are investigated. The main results are as the followed : 1. The polarization resistance of Cr plating and Ni become higher than that of base metal, also and these material become low with decrease of the specific resistance. 2. As the specific resistance decreases, the corrosion current density of Cr and Ni plating is lower than that of base metal. 3. The corrosion reaction of Cr plating, Ni plating and base metal vs. specific resistance is cathodic control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.43-48
• /
• 2001

This paper represents the design of the ground resistance measuring system insensitive to the noise in the earth. Generally, conventional ground resistance measuring instruments may fail to give a precise values for ground resistance under the situations where there is a high ground potential produced by unbalanced power system currents, haromonic currents and noise etc. To make up the defect of conventional ground resistance measuring instruments, in this paper the ground resistance measuring system using high-performance L-C resonant filter and digital signal processor is designed and the insentivity of the designed ground resistance measuring system for noise in the earth is verified by field test on power service and off power service.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.190-197
• /
• 1994

본 연구에서는 DC magnetron 스퍼터링법을 이용하여 고정밀, 고저항 저항체 박막으로 TaNx film을 제조하였을 때 형성될 수 있는 화합물 중 TaN0.1, TaN0.8과 TaN 박막의 Rs와 TCR특성을 평가하 고 film층의 우선방향성을 XRD를 이용하여 판명한 뒤 저항체의 Rs와 TCR에 미치는 영향을 조사하였 다. TaN0.1 박막이 35$\Omega$/$\square$의 면저항값과 안정된 TCR값을 나타내는 것을 알수 있었다. 두께50~200nm 의 TaN0.1과 Alumina 기판 사이에 정(+)의 TCR을 갖는 약 50nm의 Cr층을 증착하였을 때 Rs는 180$\Omega$/ $\square$ 과 TCR는 20ppm/$^{\circ}C$인 적층박막을 제조할 수 있었다. TaN0.1, TaN0.8 과 TaN 시편에서 화합물 형성 에 따른 Ta의 결합에너지를 ESCA를 이용하여 조사하였다. 이상의 연구결과로부터 TaN0.1 film이 TaNfilm 보다 고정밀, 고저항 박막 저항체 제조에 있어 우수한 전기저항 특성을 가지며 Cr 중간층 형성 으로 TCR이 $\pm$ppm/$^{\circ}C$정도로 안정된 고정밀 다층 저항체 박막을 형성할 수 있었다.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.4
• /
• pp.1-8
• /
• 2009

In this study, the large-scale pullout tests are conducted to evaluate pullout resistance of steel strip reinforcement with transverse members. The test results clearly showed the passive effect by normal stress. This suggests that both friction resistance and passive resistance by normal stress should be taken into account in the evaluation of pullout resistance for design. Therefore, The evaluation results confirmed that the developed steel strip reinforcement with transverse members depend heavily on passive resistance by normal stress.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.1
• /
• pp.55-67
• /
• 2015

This study examines innovation resistance to smart learning, an emerging innovative technology for startups and corporate ventures in the education market. The study explores whether the relative advantage, compatibility and complexity of an innovation, attitudes toward existing learning method(s), and perceived self-efficacy significantly affect innovation resistance. Additionally, the effects of such innovation resistance on future use and the moderating effect according to demographic characteristics are examined. The results of the analysis using a structural equation model showed that all the factors considered (except relative advantage) affects innovation resistance, innovation resistance significantly affects intention to use.