• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.398-408
• /
• 2009

Crude oil carriers or product oil carriers are confronted with sea pollution due to hull damage from various accidents. To reduce the oil spillage of tankers, IMO(International Maritime Organization) and OPA 90(Oil Pollution Act 1990) adopted the hull structures of double skin type. In this study, oil spillage test of the double skin tanker with 1/100 scaled model was carried out under damaged condition due to collision and grounding accidents. A new structural type of oil tanker was also tested with pipe and valve system arranged in double side and single bottom hulls. Their results were compared with that of conventional type double hull on the view point of ship safety and oil spillage.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.47-50
• /
• 1991

With increasing offshore oil exploration, drilling, and production activities, and with a huge amount of petroleum being transported by tankers and pipelines through the ocean and coastal environment and resoures has been realized among government decision makers, oil industry personnel, and the general public. Assessment must be made of the potential risk of damage resulting from the exploration, development and transportation activities, based on predictive impact evaluations of the fate of hypothetical or real oil spills.(omitted)

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.362-368
• /
• 2016

In the recent International Maritime Organization's (IMOs) Maritime Safety Committee's 93rd session, the International Chamber of Shipping and International Parcel Tankers Association addressed marine fuel oil quality problems: increasing diluents in marine fuel oil, ignition in engine rooms due to the low flash point of fuel oil, and marine fuel oils that can damage marine engines. To deal with these marine fuel oil quality problems, the International Maritime Organization secretariat appointed the worlds marine fuel oil monitoring institute and constituted a correspondence group to determine the fuel oil quality required by MARPOL Annex VI regulation 14.8 (sulfur content less than 0.5%). In this study, basic research that can help with responding to marine fuel quality issues and the IMO's work is conducted. In order to perform this basic research, the off-spec ratio related to the fuel oil quality standard (ISO 8217:2012), density distribution tendency, gross specific energy, and correlation between components in the fuel oil are analyzed through actual marine fuel oil (residual marine fuel) data from the Port of Singapore.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.6
• /
• pp.399-406
• /
• 2013

This paper describes a new simulation technique for advection-diffusion phenomena over the sea surface using the lattice Boltzmann method (LBM), capable of predicting oil dispersion from tankers. The LBM is used to solve the pollutant transport problem within the framework of the ocean environment. The sea space is represented by the lattices, where each lattice has the information on oil transportation. Since dispersed oils (i.e., oil droplets) at sea are transported by convection due to waves, buoyancy, and turbulent diffusion, the conservation of mass and many physical oil transport rules were used in the prediction model. Since the LBM is modeled using the uniform lattices and simple rules, it can be easily accelerated by the parallel mechanism, for example, GPU-accelerated method. The proposed model using the LBM is used to simulate a simple pollution event with the oil pollutants of 10,000 kL. The simulation results indicate that the LBM method accelerated with the GPU is 6 times faster than that without the GPU.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.4 s.65
• /
• pp.35-41
• /
• 2005

There has been increasing offshore oil exploration, drilling, and production activities, as well as a huge amount of petroleum being transported by tankers and pipelines through the ocean and costal environment. Assessment must be made of the potential risk of damage resulting from the exploration, development and transportation activities. This is achieved through predictive impact evaluations of the fate of hypothetical or real oil spills. VVhen an oil spill occurs, planning and execution of cleanup measures also require the capability to forecast the short-term and long-term behavior of the spilled oil. A great amount of effort has been spent by government agencies, oil industries, and researchers over the past decade to develop more realistic models for oil spills. Numerous oil spill models have been developed and applied, most of which attempt to predict the oil spill fate and behavior. For an actual contingency planning, the oil fate and behavior model should be combined with an oil spill incident model, an environmental impact and risk model and a contingency planning model. The purpose of this review study is to give an overview of existing oil spill models that deal with the physical, chemical, biological, and socia-economical aspects of the incident, fate, and environmental impact of oil spills. After reviewing the existing models, future research needs are suggested. In the study, available oil spill models are separated into oil spill incident, oil spill fate and behavior, environmental impact and risk, and contingency planning models. The processes of the oil spill fate and behavior are reviewed in detail and the characteristics of existing oil spill fate and behavior models are examined and classified so that an ideal model may be identified. Finally, future research needs are discussed.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.31-41
• /
• 1998

As the leakage of crude oil from tankers breaks out frequently, it caused a serious problem for ocean pollution and calls for developing treatments to handle the leaked crude oil and mitigate the pollution. Thus it is required to develop new purification technolgies and appropriate treatment systems which have sufficient treatment capability in order to cope with the anticipated ocean pollution. In this experiment, A and B type heavy oils were used to make the emulsion of both water containing heavy oil and sea-water containing heavy oil. The following are the main results from this study ; 1. When A and B type heavy oils were added to the original sea-water and treatedin the homogrenizer respectively, the particle of oil beacame smaller in both cases. Under the same condition, while the initial oil density of sea-water containing B-heavy oil is higher than of emulsion with A-heavy oil, the particle of A-heavy oil is finer than that of B-heavy oil. 2. When A and B type heavy oils were added to distilled water and treated in the homogenizer respectively, the particle was more dispersed and finer than that in the case of sea-water in both cases. In this result, the water containing oil formed more stable emulsion than the sea-water containing oil. 3. In this experiment, all emulsions showed oil in water types. 4. Since the oil particle is larger in the sea-water than in the distillated water, interms of elimination of oil, it is thought to be more important to give Membrane treatment after implementing sandfilter, activity carbon, coagulation-sedimentation and floating separation as pre-treatment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.301-306
• /
• 2016

During the initial stage of propulsion shaft design, the shaft alignment process includes a thorough consideration of lateral vibration to verify the operational safety of the shaft. However, a theoretical method for analyzing forced lateral vibrations has not been clearly established. The methods currently used in classification societies and international standards can only ensure a sufficient margin to avoid the blade-passing frequency resonance speed outside the range of ${\pm}20%$ of the maximum continuous rating (MCR) for the engine. Typically, in shaft alignment analyses, longer center distances between the support bearings promote affirmative results, but the blade order resonance speed can approach the lower limit for lateral vibration. Therefore, this matter requires careful attention by engineers, and a verification of the theoretical analysis by experimental measurements is highly desirable. In this study, both theoretical and experimental analyses were conducted using strain gauges under two draught conditions of vessels used as 50,000-DWT oil/chemical tankers, introduced recently as eco-friendly ships. Based on the analyses, the influence of the lateral vibration on the shafting system and the system's reliability was reviewed.

• Journal of Korea Port Economic Association
• /
• v.23 no.3
• /
• pp.103-126
• /
• 2007

As a result of the development of heavy and chemical industries during the Economic Development Plan, Korean shipbuilding industry expanded its capacity rapidly and became a strategic export industry. The 1973 Arab oil crisis and the subsequent doubling of oil prices greatly reduced world demand for tankers and the market was crashed as numberous orders for tankers were cancelled in Japan and Europe. Under these circumstances, Korean Shipping industry also experienced a decrease in overseas demand for shipbuilding. The Korean government established the 'planned shipbuilding' scheme. The primary purpose of the scheme was to develop the shipbuilding industry, to link the industry to the shipping industry and to develop both industries together. However, Japanese shipping established goals linking with macro-national economic policy, such as saving foreign currencies and freight of importing goods, also assisting reconstruction and development of shipbuilding industry. To accomplish these goals, Japanese government used several policy tools such as financial assistance, law, guidance.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.647-653
• /
• 2013

Energy acquisition due to the increase of oil price is one of the most important issues and policy for most countries. Various tankers have been built in the world and sent to the trade market. It is necessary to build the port infrastructure and facilities to give them proper services such as mooring, packing, storing, and transshipment, etc. However, the domestic guidelines or standards for design and construction for the dolphin berth among these facilities are out of date and do not meet the recent trend of tanker types. Therefore, it requires amendment on the guidelines or standards. In this study, a detailed analysis of the tanker fleet, covering 8,000 ships under operation and order to build, is made to estimate the proper PBL(Parallel Body Length) of each tanker class. After discussion and comparison on the dolphin berth design and construction codes of various countries, those are the leading countries of tanker operation and management, suggestion was made to amend on the design code. The referred codes are of Korea, Japan, UK, USA, and Canada. The analysis of tanker fleet shows the PBL as 0.45L under the normal ballast condition. In order to verify the deduced amendment on the domestic design code for dolphin berth, it was selected one of the domestic dolphin berth, located at the Yeosu oil terminal, which is almost completed to construct. The design criteria and expected tankers to moor in that terminal were analyzed and the appropriateness and countermeasure for deficiency were summarized.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.129-137
• /
• 2013

In order to obtain quantitative basic data for marine oil pollution prevention, the statistics of oil spill incidents in Korea and in the world for 20 years from 1993 to 2012 were collected and analyzed with relation to the number of oil spills and the amount of oil spilt. In Korea for 20 years, total number and average annual number of oil spills were 6,608 cases and nearly 330 cases/year, respectively, and total volume and average annual volume of oils spilt were 57,328 kL and nearly 2,866 kL/year, respectively. Due to major oil spills from oil tankers, annual volumes of oils spilt in Korea were sharply increased to 15,388 kL in 1993, 15,773 kL in 1995, 3,428 kL in 1997 and 13,008 kL in 2007. In case of worldwide oil spills for 20 years, total number and average annual number of oil spills of 8 kL (or 7 tonnes) and above were 420 cases and 21 cases/year, respectively, and total amount and average annual amount of oils spilt 8 kL (or 7 tonnes) and above were about 800,000 kL (or 704,000 tonnes) and about 40,000 kL/year (or 35,200 tonnes/year), respectively. Major oil spills from oil tankers increased massively annual amounts of oils spilt worldwide to about 159,000 kL (or 140,000 tonnes) in 1993, about 147,600 kL (or 130,000 tonnes) in 1994, about 90,900 kL (80,000 tonnes) in 1996, about 81,800 kL (72,000 tonnes) in 1997 and about 76,100 kL (or 67,000 tonnes) in 2002. Obvious correlation between annual number of oil spills and annual amount of oil spilt was not found in both Korea and the world, while both annual number and annual volume tended to decrease with the lapse of year in both Korea and the world, though there were wide fluctuations from year to year in both annual number of oil spills and annual amount of oils spilt worldwide and in Korea for 20 years. From 2008 to 2012 worldwide, there were sharp decreases in both annual number and annual amount of oil spills. In particular, no oil spill of 800 kL (or 700 tonnes) and above occurred in the year of 2012.