• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.75-81
• /
• 2009

Benzo(a)pyrene[B(a)P] levels were determined in processed oils and by-products of corn oil, and removal protocol was formulated. The cause of high level B(a)P contents in corn oil was established. Corn germ had a B(a)P level more than 80% that of whole corn. B(a)P content in final deodorized corn oil was $2.15{\mu}g/kg$, after the usual refining process. B(a)P contents less than $2.0{\mu}g/kg$ could not be attained by routine refining process. However, deodorized corn oil, with B(a)P level of $0.09{\mu}g/kg$, could be prepared by treatment of oil with approximately 2% (w/w) mixed granules(acidic clay:active carbon= 90:10[w/w]). The optimal amount of active carbon was 10% (w/w) that of acidic clay;higher levels of active carbon was not required. The optimal particle size of active carbon was $50{\sim}100$ mesh, removal of B(a)P from bleached corn oil was efficient at this mesh size.

• Corrosion Science and Technology
• /
• v.19 no.2
• /
• pp.66-74
• /
• 2020

In this paper, the author's team has carried out a comparative experimental study on the corrosion characteristics of Q235 steel commonly used in large-scale storage tanks under the specific bottom water environment found with Russian and Daqing crude oil. It was found that there is a certain degree of uniform or local corrosion on the tank floor depending on the kind of bottom water. The bottom water corrosion of Daqing crude oil is a uniform corrosion caused by carbon dioxide. While the Russian crude oil bottom water corrosion is clearly local corrosion caused by co-corrosion of carbon dioxide and hydrogen sulfide, here the corrosion rate is obviously higher than that caused by Daqing crude oil. There are two modes of storage tank inspection and maintenance that have been currently adopted by Chinese refining and chemical enterprises: a regular inspection mode and a API581-2016 risk-based detection mode. These modes have been effectively combined to form an intelligent tank inspection and maintenance mode, software tools to support this intelligent inspection and maintenance management have been developed.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.113-119
• /
• 2014

Due to the development of the petroleum refining technology and continuously increased demand from markets, a quantity of gasoline and diesel oil produced from a restricted quantity of crude oil has been increasing, and residual fuel to be used at marine diesel engines has been gradually becoming low quality. As a result, it was recently reported that trouble oils which cause abnormal combustion such as knocking with extreme noise and misfire from internal combustion engines were increasing throughout the world. In this study, an author investigated ignitability and combustion quality by using combustion analyzer with constant volume(FCA, Fuel Combustion Analyzer) and middle speed diesel engine about MDO(Marine Diesel Oil), HFO(Heavy Fuel Oil), LCO(Light Cycle Oil) and Blend-HFO which was blended LCO of 1000 liters with HFO of 600 liters. Moreover, for betterment of ignitability and combustion quality of injected fuels, multi-injection experiment was carried out in the diesel engine using Blend-HFO. According to the results of FCA analysis, ignitability and combustion quality was bad in the order of MDO

• Preventive Nutrition and Food Science
• /
• v.15 no.1
• /
• pp.51-56
• /
• 2010

The aim of this study is to examine the radical scavenging activity of perilla and sesame oil that Koreans traditionally consume. For DPPH radical scavenging activity, oil and its hexane/70% methanol extracts (ME) are used and for superoxide and hydroxyl radical scavenging activities, ME are used. Unrefined perilla oil, sesame oil, and refined sunflower oil are used. The yields for ME of perilla, sesame and sunflower oil are 0.57, 0.61, and 0.30%, respectively, and the amounts of phenolic compounds in ME of corresponding oil are 18.77, 88.64 and $0.05\;{\mu}g$ tannic acid/mg, respectively. $IC_{50}$ for DPPH scavenging activity of perilla, sesame and sunflower oil are 2.12, 1.91, and 3.35 mg/mL, respectively and those for ME of corresponding oils are 0.42, 0.07, and 43.11 mg/mL, respectively. In DPPH assay, the solvent used for oil sample is iso-octane and that for ME is methanol. Superoxide anion scavenging activity of ME of perilla, sesame and sunflower oil tested at 1 mg/mL concentration are 21.10, 13.25, and 3.14%, respectively. Hydroxyl radical scavenging activities of those samples tested at 1 mg/mL concentration are 86.08, 93.30, and 93.17%, respectively. In summary, the refining process seems to remove the phenolic compound during oil processing. Antiradical substances in perilla and sesame oils responsible for scavenging DPPH radicals are present in the methanol fraction, while the antiradical substances in the sunflower oil are in the lipid fraction. DPPH scavenging activity of ME of sesame oil is significantly higher than that of perilla oil (p<0.05). However, superoxide anion scavenging capacity of ME of perilla oils was found to be greater than that of both sesame and sunflower oils (p<0.05).

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.269-273
• /
• 2012

The principal objective of this study was to estimate the benzo(a)pyrene contents in commercial vegetable oils available in the Korean market and to assess the effects of various processing steps for vegetable oils on the contents of benzo(a)pyrene. Benzo(a)pyrene content in the studied commercial vegetable oils, crude oils, and raw materials were found to be lower than the maximum levels of 2 ppb. In both refined and pressed oil, the benzo(a)pyrene contents can be reduced through refining steps. However, an evident increase of benzo(a)pyrene contents during both the expeller process for corn oil and the roasting process for sesame oil was observed. This result indicates that the processing procedure, particularly heat treatment and refining steps would be critical in managing the benzo(a)pyrene contents in vegetable oils.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.895-900
• /
• 1998

In order to the effective utility of marine by-product, crude lecithin was isolated from skipjack viscera oil and the lecithin was refined by bleaching and deodorization. Crude lecithin was separated from the skipjack viscera oil degummed with 0.4 ml of citric acid per 100 ml of the oil. Bleaching was effected by adding $5\%$ activated clay and treating for $40^{\circ}C$ for 90 min under vacuum, and deodorization was effectively conducted by steam distillation at $130^{\circ}C$ for 60 min under 4 ton of vacuum. The major fatty acids of the skipjack viscera oil. were 16:0. 18:1 (n-9), 22:6 (n-3), 18:0, and 16:1 (n-7). Crude and refined lecithins contained more aproximately $7\~18\%$ of 22:6 (n-3) than raw oil, the skipjack viscera oil.

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.350-361
• /
• 2008

Canada's oil sands contain one of the largest reserves of oil in the world. According to recent estimates, there are nearly 180 billion barrels of oil in the Canadian oil sands trapped in a complex mixture of sand, water and clay. More than 40 companies have been currently operating or developing oil sands facilities since the first production in 1967. The process of oil sands upgrading is similar with down stream refinery, but the corrosion environment in upgrading refinery is often more severe than in the refinery because of high chlorides, mineral contents, carbonic acid, heavy viscosity and fouling, higher naphthenic acid [$NA-R(CH_{2})nCOOH$], and greater sulfur contents. Naphthenic acid corrosion (NAC) which is one of the most critical corrosion issues in up & downstream refinery plants was observed for the first time in 1920's in refinery distillation processes of Rumania, Azerbaizan (Baku), Venezuela, and California. As a first API report, the 11th annual meeting stated sources and mechanism of NAC in early 1930's. API has been developing the risk base standards, such as API RP580, 571, and Publication 581 which are based on the worst NAC damage in the world since 2000. Nevertheless not only the NAC phenomena and control in Canadian sands oil process are not much widely known but also there are still no engineering guidances for the Canadian sands oil in API standards. This paper will give NAC phenomina and materials selection guidance against NA environment in Canadian oil sands upgrading processes.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.129-132
• /
• 2008

The purposes of this study were to investigate the physicochemical properties and component values of bamboo oil from Phyllostachys nigra var. henonis obtained by refining process. The tar concentration in the refined bamboo oil (RBO) was decreased to about 78% compared to crude Bamboo oil (CBO). The chromaticities of light, red, and yellow in RBO were 92.4 and 3.0, respectively. This result indicates that the chromaticity of light was increased with the decrease in the tar concentration in the Bamboo oil. The total concentrations of organic acid and phenolics compound in RBO were decreased to about 63% and 80%, respectively. The total concentration of free sugars was decreased to about 78% in RBO and the concentration of free sugar was in the order of lactose, fructose, and glucose. The palmitoleic acid and stearic acid concentrations were higher than that of other fatty acids. The concentration of total organic acid was decreased to about 88% through RBO. Among the various organic acids, the formic acid concentration was highest in the RBO. The minerals concentrations in the CBO were in the order of Ca, K, Na, and Fe. On the other hand, in the case of RBO, it was in the order of Ca, Fe, K, and Na.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.396-401
• /
• 2010

The purpose of this study was the development of adsorbents for the refining of edible oil using agricultural byproducts such as rice hull, barley hull, and soybean hull as well as evaluation of their adsorptive effects against free fatty acids and lutein, the major impurities of soybean oil. Ash-type and carbon-type adsorbents were produced from the hulls. Ash-type adsorbents such as rice hull ash (RHA), barley hull ash (BHA) and soybean hull ash (SHA) were effective for the removal of free fatty acids; the acid value of degummed soybean oil was decreased by 86% upon treatment with 5% SHA. However, carbon-type adsorbents such as rice hull carbon (RHC), barley hull carbon (BHC), and soybean hull carbon (SHC) were effective for removing lutein, resulting in a 52% decrease in the lutein content of degummed soybean oil upon treatment with 5% SHC. Whereas ash-type adsorbents were composed of mesopores or macropores with small surface areas and total pore volume, carbon-type adsorbents were mainly composed of micropores with large surface areas and total pore volume.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.209-227
• /
• 2012

Northeast Asia where is an epicenter of the global financial crisis's conquest is traditional imbalanced region of oil production and consumption. In recent years, the region has been suffered by the shortage of oil storage and transportation facilities due to surging oil trading and necessity in strategic reserves. Therefore, since independent petroleum logistics with the storage facilities and oil trading hub is required to form efficient oil market in this region. In this study, we analyzed the efficiency of refinery facilities by country that is of importance in being a logistics hub in Northeast Asia by employing non-static and dynamic efficiency analysis, which are a part of DEA(Data Envelopment Analysis) and then policy implications have been drawn. The result illustrates Korea's is the highest country in terms of efficiency of oil refining facilities in Northeast Asia. It implies that Korea has strong position to be the oil hub in Northeast Asia.