• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.3
• /
• pp.146-151
• /
• 2015

The heat transfer performance of heating medium oil fluidized bed heat exchanger was measured. The operation variables were air flow rate, air inlet temperature, moisture content, water flow rate and water inlet temperature. The outside heat transfer coefficient was determined from the heat exchanger experiment and its experimental correlation was determined as a function of air velocity and viscosity of heating medium oil. Effect of viscosity was well agreed with the previous studies. Errors of the correlation equation was less than about 10% for outside heat transfer coefficient developed in this study when compared with the measured value. Hot water with the temperature greater than $77^{\circ}C$ could be produced by using the heating medium oil fluidized bed heat exchanger.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.480-484
• /
• 2011

In this study, degumming process was carried out for reducing to less than 10 ppm of phosphorus contents and primary properties of crude canola oil including 0.64 mgKOH/g of acid value, 0.09% of water contents, 0.13% of insoluble impurities, and 40 ppm of phosphorus contents. Efficiency of water degumming and enzymatic degumming was compared for the selection of suitable process obtaining feedstock of biodiesel. Degumming method was determined for preparation of raw material of biodiesel, and reaction conditions were also established. The most effective conditions for water degumming were 2% distilled water (w/w oil), $30^{\circ}C$ of reaction temperature, 900 rpm of agitation speed, and 30 min of reaction time, respectively. In case of enzymatic degumming, optimal conditions were found to be 90 ppm of phospholipase A2 (w/w oil), $50^{\circ}C$ of reaction temperature at pH 5, respectively. When comparing water degumming with enzymatic degumming, efficiency of enzymatic degumming was better than water degumming. However, water degumming method was much more suitable for the production of biodiesel feedstock considering reaction time and process feasibility.

• Journal of Power System Engineering
• /
• v.19 no.2
• /
• pp.90-95
• /
• 2015

Recently worldwide concern and research is being actively conducted on green energy which can reduce environmental pollution. A plant such as the natural rapeseed oil, soybean oil, palm, etc. is used as a bio source in home and industry. Biofuels is a sustainable fuel having economically benefits and decreasing environmental pollution problems caused due to fossil fuel, and it can be applied to the conventional diesel engine without changing the existing institutional structure. Waste vegetable oil contains a high cetane number and viscosity component, the low carbon and oxygen content. A lot of research is progressing about the conversion of waste vegetable oil as renewable clean energy. In this study, waste oil was prepared to waste cooking oil generated from the living environment, and applied to diesel engine to confirm the possibility and cost-effectiveness of biodiesel blend waste oil. As a result, brake specific fuel consumption and NOx was increased, carbon monoxide and soot was decreased.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.34-39
• /
• 1999

Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices by adhesion method is known to be closely related with the problem of estimating the thickness of film remaining on the surface of solid withdrawn from a quiescent liquid. In the present study a series of experimental results are compared with the analytic estimation for the thickness of film remaining on the solid surface using non-dimensional analysis. For the case of pure water both results show the remarkable agreement. However, discrepancy has been found for the case of Bunker C oil and diesel oil. The analytic estimation over-predicts the experimental value for the case of Bunker C oil and under-predicts it for the case of diesel oil. Further study is required to investigate the real situation including a contact angle and the property difference between oil and water.

• Tribology and Lubricants
• /
• v.26 no.3
• /
• pp.167-174
• /
• 2010

An apparatus for measuring oil oxidation was developed, which is capable of being mounted to mechanical devices for detecting power of fluorescent light reflected from oil in real time as an indication of the oil oxidation. This device has an advantage over conventional fluorescence spectrometers where the thin film is required for the measurement. Clean and used oil samples (mineral and synthetic oils) were tested by the developed apparatus that calculates a fluorescence quantum yield and a light absorption coefficient of the oil based upon the signals from the two light-receiving members and evaluates the degree of oil oxidation of test oils based on the fluorescence quantum yield. Results generally show that the developed device is able to effectively evaluate oil oxidation characteristics on-site in the field.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.73-74
• /
• 2003

Three experiment were designed to determine the effects of dietary(n-3) fatty acids on the growth-suppressive effects of the inflammatory response and anti-oxidant enzyme activity and balances of nitrogen and energy. Day-old chicks were fed diets containing 1.0 ％ soybean oil in experiment 1, or diets containing 1.0 ％ of fish oil in experiment 2, and then on 7-d of age chicks were fed diets containing 1.0 ％ of either soybean oil or fish oil. In experiment 3, day-old chicks were fed on diets containing 1.0 ％ of either soybean oil or fish oil. In chicks of half pens within each dietary treatments of each experiments, the acute phase response were induced by injecting with Salmonella typhymurium lipopolysaccaride(LPS) i.p. 3 times at 8, 10 and 12-d of age. During acute phase response, chicks fed dietary fish oil from 1-d of age enhanced energy balances and did not give negative effect on nitrogen balance and uric acid excretion, but elevated MnSOD and Cu/ZnSOD activity In liver and erythrocyte cytosols compared with those fed dietary soybean oil. The results indicated that enhanced daily gain and metabolizable energy value of diet in birds fed fish oil from one-d of age seems due to change on the antioxidants systems during acute phase response.

• Journal of Nutrition and Health
• /
• v.27 no.4
• /
• pp.323-335
• /
• 1994

The present study was carried out in normocholesterolemic New Zealand white(NZW) rabbit, to evaluate the effect of dietary supplementation with Korean pinenut oil, on plasma lipids, plasma lipoproteins, liver lipids and platelet aggregation. NZW rabbits were fed for 80 days on a commercial chow diet supplemented with 5% of energy as fats(soybean oil or pinenut oil) or 10% of energy as fats(soybean oil or pinenut oil). A control group was fed a commercial stock diet. There were no significant effects of pinenut oil on plasma free cholesterol, HDL-cholesterol, triglycerides, glucose and lecithin-cholesterol acyltransferase, as compared with those obtained from rabbits fed the soybean oil diet. After 80 days, the concentration of plasma free fatty acid in only the pinenut oil group was significantly decreased by about 50% relative to the control diet. At the end of the dietary treatment, liver triglycerides and phospholipids were significantly decreased in the pinenut oil group, compared to the how diet, whereas the soybean oil-consuming rabbits had only significantly decreased phospholipid levels. Cholesterol contents of liver were unaffected by type of dietary fat. At the end of 80 days, a diet containing pinenut oil resulted in a decrease in apolipoprotein B and the apo B/apo AI ratio as compared with the stock diet or soybean oil diet. Platelet aggregation induced by collagen or arachidonic acid was depressed significantily in pinenut oil diet.

• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.119-125
• /
• 2017

A novel two stage cylindrical cyclone was developed for a 3 phase separator in shale oil production industry. The cyclone performance was compared with a cone type cyclone and multi cyclone at the same experimental condition using water and oil mists generated by a humidifier and atomizer at the flow rate 1 to $2m^3/min$. The removal efficiency of total suspended water droplets by the novel cyclone, calculated using inlet and outlet concentrations measured by an optical particle counter, was 99% which is higher than 90% of oil droplet removal efficiency at $2m^3/min$. It might be due to the evaporation of small water droplets during the tests. The water and oil droplet removal performance of the novel cyclone based on the quality factor which is a function of pressure drop and removal efficiency was the highest among three cyclones. The results indicate that the cyclone could be an economical device to remove water and oil mists from shale gas generation processes where a huge three phase separator is commonly used.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.107-115
• /
• 2008

The numerical analysis of energy and material balance, and plant performance has been carried out when applying the heavy residual oil instead of heavy oil to the existing heavy oil power station. The performance analysis model has been constructed for A heavy oil power station in Korea, and the modeling results were compared with the design data in order to ensure the validity of the model, and further compared with the plant operation data. With the heavy residual oil, the simulation gave 315 MW in power output, which is higher than that of the heavy oil combustion, but the plant efficiency turned out to be lower. The sensitivity analysis of heat rate for the changes in cooling water and ambient temperature, flue gas recirculation and power output has provided valuable information for the optimal operation of the power station.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.55-62
• /
• 2008

This study is aimed at substantially reducing the particulate matter (dust) emission during the combustion of heavy fuel in boilers by addition of combustion improver. The combustion improver used were the oil-soluble organometallic compounds that were found to be more effective than the dispersing agents that are generally used for reducing the particulate emission. The dust reduction effect was found to depend on the active materials (metals) as well as on the organic ligand part of organometallic compounds. Acetylacetonoate and naphthenate of Fe and Ca were found to be most effective for dust reduction. Addition of Fe and Ca organometallic compounds as combustion improver in concentration of 30 ppm (metal basis) to heavy fuel oil, caused dust reduction by 50 wt% to 80 wt%.