• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.662-669
• /
• 2014

Mineral oil has been widely used as dielectric insulating fluid in transformers due to its excellent performance in-service. However, there are few issues with mineral oil such as it has poor biodegradability and could contaminate the environment if a spillage occurs. With the increasing tight regulation on safety and environment, alternative fluids for mineral oil are currently being investigated and among the suitable candidate is the vegetable oil. There are different types of vegetable oils and one of them is the palm based oil. At the moment, extensive research works are carried out to examine its feasibility to be applied in transformers. This paper will review the previous research works that were carried out to examine the suitability of palm based oil as dielectric insulating fluid in transformers. The physical and chemical properties of palm based oil are studied based on viscosity, acidity, oxidation stability and flash point. Next, the electrical characteristics of palm based oil are examined based on AC breakdown voltage, relative permittivity, dissipation factor and partial discharge.

• Journal of Adhesion and Interface
• /
• v.18 no.4
• /
• pp.179-182
• /
• 2017

Waterborne polyurethanes(WPU) based on castor oil were successfully prepared using polycaprolactone diol(PCL), castor oil(CO) and 4,4'-methylene dicyclohexyl diisocyanate($H_{12}MDI$) as soft segment part, dimethylolbutanoic acid (DMBA) as emulsifier, and trimethylamine(TEA) as neutralizer based on different molecular weight of prepolymer. The various properties such as mechanical strength and surface reforming were evaluated using UTM, contact angle, FE-SEM based on the different molecular weight of polyol. Waterborne polyurethanes based on castor oil could be considered as a promising candidate to be applied the various adhesion fields.

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.901-908
• /
• 1996

The oil-based magnetic fluids were prepared with synthesized ultrafine magnette by allowing surfactactants such as sodium oleate and aliquat 336 to adsorb on the surface of magnetite particles. The dispersion ratio of oil-based magnetic fluids was higher than 90% when the amount of sodium oleate and aliqua 336 were more than 2.63$\times$10-2 mol and 6.56$\times$10-3 mol for 20g of magnetite respectively. The dispersion ratio of oil-based magnetic fluids with the amount of secondary surfactant addition was higher than 90% when oil-based magnetic fluids were prepared with aliquat 336 of cationic type. However oil-based magnetic fluids prepared with surfactants of anionic and nonionic type showed lower dispersion than whose with cationic surfac-tants.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.275-281
• /
• 2009

Sesame oils are partially mixed with other vegetable oils due to high price in a Korean market. To find out authentic sesame oil, a mass spectrometer-based electronic nose (MS-based E-nose) was used. Sesame oil (Se) was blended with soybean oil (So) or corn oil (Co) at the ratio (Se:So, Se:Co) of 97:3, 94:6, 91:9, 88:12 and 85:15, respectively. Intensities of each fragment from sesame oil by MS-based E-nose were completely different from those of soybean oil or corn oil. The obtained results were used for discriminant function analysis (DFA). Volatile organic components (VOC) of soybean oil or corn oil were similar to those of fresh air and DFA plot indicated a significant separation of pure sesame oil and pure other oil. The group of the mixed oil was seperated with that of sesame oil in DFA plot and the added amount of soybean oil to sesame oil was correlated with discriminant function first score (DF1). MS based E-nose system could be used as an efficient method to investigate the purity of sesame oil.

• Journal of Navigation and Port Research
• /
• v.35 no.9
• /
• pp.735-740
• /
• 2011

It is necessary to develop the one stop system in order to protect our marine environment rapidly from oil spill accident. The purpose of this study is to develop real time database for oil spill prediction modeling and implement real time prediction modelling with ESI and server-client GIS based user interface. The existing oil spill prediction model cannot provide one stop information system for public and government who should protect sea from oil spill accident. The development of multi user based information system permits integrated handling of real time meteorological data from external ftp. A server-client GIS based model is integrated on the basis of real time database and ESI map to provide the result of the oil spill prediction model. End users can access through the client interface and request analysis such as oil spill prediction and GIS functions on the network as their own purpose.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.609-614
• /
• 2009

Sesame oil was sometimes replaced by mixed oil due to high price in Korean market. To find out authentic sesame oil, electronic nose (E-nose) based on mass spectrometer system was used. Sesame oil was blended with perilla oil at the ratio of 97:3, 94:6, 91:9, 88:12 and 85:15, respectively. Intensities of each fragment from sesame oil by E-nose based on MS were completely different from those of perilla oil. The obtained data was used for discriminant function analysis. For quantitative analysis, the partial least square algorithm was used. The added concentration of perilla oil to sesame oil was correlated with discriminant function first score (DF1) and second score (DF2). From this relationship it could be found out how much perilla oil added. DFA plot indicated a significant separation of pure sesame oil and pure perilla oil. The different geographical origin of sesame oil was used for blending with perilla oil were closed to that of sesame oil. Korean sesame oil mixture and Indian sesame oil one were well separated. And the correlation between mixing ratios and DF1 values was found at the ratio of 97:3, 91:9, and 85:15 (SE vs PE oil), respectively. But the added concentration of perilla oil to sesame oil was correlated with discriminant function first score (DF1). E-nose based on MS system could be used as an efficient method for purity of oil quality.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.243-248
• /
• 1999

From the lessons after the Nakhodka oil-spill in Jan. 1997, oil slick detection by using remote sensing data and assimilating the data to the simulation program is important for monitoring the oil-drift pattern. For this object, we are going to construct the oil-spill warning system for estimating the oil-drift pattern using remotesensing/numerical simulation Model. Additionally we plan to use this system for restorating oil-spill damage domestically, such as estimating the ecological damage and making the priority fur restorating the oil-spilled shoreline. This report is intended to summarize the role of geo-informatics in the oil spill accident by not only paying attention to the effect of information provision/information management via the map, but also reporting the interim result in part based on the details discussed in the processes of recovery support and environmental impact assessment during the Nakhodka's accident.

• The Journal of Korea Robotics Society
• /
• v.3 no.4
• /
• pp.345-350
• /
• 2008

This study aims to propose the concept design of oil spill protection robot which can rapidly intervene to control the oil spillage situation at the sea. Taking into account the fact that a huge amount of oil is transported trans-continentally by oil tanker, none of industrialized countries are completely safe from the marine oil spill which results in social, economical and ecological damages to their communities. The employment of double hull-oil tanker, pipe line transporting can be most safe way. Yet complete prevention of oil spill is probably not realistic. Accordingly the alternative solution to control marine oil spill and minimize the damages caused by the incident using intelligent robot technology based on swarm control method is proposed. The main features of oil spill protection(OSP) robot is explained via following three perspectives. Firstly, from functional point of view, OSP robot system safely and efficiently replaces oil boom installation manually conducted by human workers with intelligent robot technology based on swarm control theory. For second, its modular architecture brings efficient storage of main components including oil boom and facilitates maintenance. For the last, its geometric form and shape enables whole system to be installed to helicopter, boat or oil tanker itself with ease and to rapidly deploy the units to the oil spill area.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.105-118
• /
• 2019

In the past two decades, due to the rapid fluctuations in the oil supply and demand in Northeast Asia as well as a surge in oil prices in the early 2000s, Korea has been developing the Northeast Asia Oil Hub project as a national project. This project was promoted based on the policy consideration that the nation's energy security and regional development can be promoted by establishing an oil hub in Northeast Asia that can eventually replace Singapore as East Asia's oil logistics hub. Following the construction of a large-scale oil storage facility in Yeosu in 2013, the main project in Ulsan has suffered many difficulties due to environmental changes such as the supply and demand of oil and political factors. The survey, which investigated the performance, problems, and prospects of the oil hub project, illustrates that scores of all sectors are of average level. In terms of performance and prospects, policies such as facility investment, law, and system improvement were determined to be rather high while operational areas such as value-added activities, profitability, and marketing activities were perceived as having more serious problems by respondents. In conclusion, despite the strong potential of Korea's oil hub based on its geographical location, facilities, and oil product capacity, there are problems related to policies, institutions, and investment. In the future, the oil hub business should be reviewed by considering environmental factors, and a drastic improvement plan for attracting foreign investors and oil traders should be established.

• Composites Research
• /
• v.30 no.1
• /
• pp.41-45
• /
• 2017

Magnetite nanoparticles were synthesized by adding an ammonium hydroxide to a mixed solution of iron (II) and (III) chlorides. A silicon surfactant of ${\alpha},{\omega}$-(3-aminopropyl)polydimethylsiloxane was adsorbed on the particles as dispersant and a polydimethylsiloxane polymer was used to prepare ferrofluids of silicone oil base. Fluorinated surfactants of anionic ammoniated perfluoroalkyl sulfonamide and nonionic fluoroaliphatic polymeric esters were applied to the particles and a perfluoropolyether was used to prepare ferrofluids of fluorine oil base. The experimental conditions were used for preparing the ferrofluids with concentrations of 200, 300 and 400 mg/mL, and density, magnetization and viscosity of the products were characterized. The density values increased in proportion to the concentration, indicating 1.11-1.27 g/mL for silicone-oil-based fluids and 1.95-2.10 g/mL for fluorine-oil-based fluids in the range of 200-400 mg/mL. The saturation magnetization of the silicone-oil-based and fluorine-oil-based fluids indicated 14.7, 24.4, and 30.7 mT and 15.8, 23.3, and 33.7 mT for 200, 300, and 400 mg/mL, respectively, depending on the content of magnetic particles in the fluid. The viscosity of the silicone-oil-based ferrofluids was highly stable compared to that of the fluorine-oil-based with increasing temperatures. The ferrofluids are usually applied to seals and speakers with the silicone base and to seals with the fluorine base.