• 한국축산식품학회지
• /
• 제43권6호
• /
• pp.1128-1149
• /
• 2023

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.1-11
• /
• 2006

The W/O emulsion was formed by mixing hydrophobic nonion surfactants of span 80 and tween 60 with kerosine, and by adding sodium silicate aqueous solution. Precipitating the W/O emulsion by sodium bicarbonate resulted in spherical silica particles. Shape and size distribution of silica particles were observed. The particles were spherical and they have narrow size distribution. Particle sizes were 9.29, 7.39 and $5.73\;{\mu}m$ at homogenizer speed of 2500, 3000, and 3500 rpm, respectively. The particle size was decreased by increasing agitation speed due to the formation of emulsion droplet. At fixed agitation speed, absorbed paraffin oil weight were measured and the $SiO_2/Na_2O$ mole ratio effects on particle size were investigated. Particle size was decreased by increasing the mole ratio of $SiO_2/Na_2O$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.246-251
• /
• 2003

This paper presents an experimental study on the energy dissipation characteristics of viscous damping wall (VDW). VDW is consisted of a plate floating in a thin case made of steel plated filled with highly viscous silicone oil. Because VDW demonstrates both viscous damping and stiffness characteristics, the viscous resisting force can be expressed as the sum of velocity dependant viscous damping force and displacement dependant restoring force. The viscous resisting force and energy absorbing capacity can be easily adjusted by changing three factors, i.e. viscosity of the fluid, gap distance and area of the wall plates. VDW was tested using a series of harmonic (sinusoidal) displacement history having different frequency and amplitude and the force-displacement relationship was recorded. The relationship between dissipated energy with three factors and the influence of exciting frequency on resisting force were Investigated

• 한국항해항만학회지
• /
• 제46권4호
• /
• pp.297-302
• /
• 2022

탄산칼슘과 염산 수용액에 폴리프로필렌 섬유를 침지시켜 표면에 염화칼슘 결정을 생성시킴으로써 발열 흡착포를 제작하였다. 발열 흡착포를 유출 기름으로 인해 유막이 형성된 해수면에 적용하면 염화칼슘 결정이 주변의 수분을 흡수하여 이온화되면서 용해열을 방출한다. 염화칼슘의 용해열을 유동점 이하의 저온에서 응고된 저유황 중질유를 액화시켜 흡유 가능한 상태로 전환시킨다. 발열 흡착포의 제작을 위해 폴리프로필렌 표면에 염화칼슘 결정을 생성시키기 위한 탄산칼슘과 염산의 최적 몰농도는 각각 0.25 M과 0.5 M이다. 저유황 중질유 발열 흡착포의 흡유능은 해수 온도에 따라 다르지만, 우리나라 인근 해역의 동절기 평균 수온인 10℃에서 4.5-7.08 g/g으로 매우 우수하였다. 염화칼슘 발열 흡착포를 사용하면 동절기 선박사고로 인하여 해양에 유출된 저유황 중질유를 효과적으로 흡유하여 제거할 수 있다.

• Journal of Photoscience
• /
• 제2권1호
• /
• pp.37-45
• /
• 1995

INTRODUCTION : Psoralens are planar tricyclic furocoumarins present in numerous plants and fungi found throughout the world.' Naturally occurring and synthesized psoralen derivatives(see Figure 1) are photosensitizers of UVA especially from 320 nm to 400 nm, a range at which cellular nucleic acids and proteins are weakly absorbing if any at all. Because of their skinphotosensitizing properties, these compounds have been used in the photochemotherapy of psoriasis and vitiligo. However, undesirable side effects such as carcinoma development in hairless mice as well as possible liver damage from the use of 8-methoxypsoralen(8-MOP) have been reported. The other photobiological effects include inactivation of DNA viruses, killing and mutagenesis of bacteria, inhibition of tumor transmitting capacity of various cells, and hyperpigmentation on human and guinea pig skin. PUVA(psoralen+UVA) photochemotherapy is in fact thousands of years old, having been used in Egypt and India since B.C. 1200-2000. Photochemotherapy for a common disfiguring disease, vitiligo, was practiced in the ancient world by physicians and herbalists who used boiled extracts of the fruits of certain umbelliferous plants, e.g. Ammi majus Linnaeus in Egypt or the leguminous plants, Psoralea corylifolia L. in India. It was first described by Kuske in 19388 that photosensitization of skin by plants was related to the presence of psoralen. He identified natural psoralens in plants as photosensitizers and isolated bergapten(5methoxypsoralen) from the oil of bergamot. The scientific interest in photosensitizing psoralens, however, has grown considerably after the introduction into clinics of the psoralen photochemotherapy for the treatment of psoriasis and of other skin (abbreviation)

• 대한화장품학회지
• /
• 제42권1호
• /
• pp.1-7
• /
• 2016

본 연구에서는 분무 건조 공정을 이용하여 다공성 PMMA 입자 내부에 $TiO_2$ 나노입자가 고르게 함침된 유/무기 복합분체를 제조하여, $TiO_2$의 은폐력은 그대로 유지하면서도 다공성 구조체로 피지를 흡유하여 지속성을 증대시키는 메이크업 화장품 소재로서의 가능성을 확인하고자 하였다. 끓는점이 다른 두 가지 공용매(디클로로메탄 및 헥산올)의 비율과 고분자의 농도 조절을 통해 입자크기와 기공크기를 제어할 수 있었으며, $TiO_2$ 나노입자를 제조된 시료의 전체 무게 대비 74.6 wt%까지 함침 시킬 수 있었다. SEM 이미지 분석을 통하여 복합분체의 다공성 구조를 확인하였고, 절단면 이미지를 통하여 내부에 $TiO_2$ 나노입자가 균일하게 함침 되어 있는 것을 관찰하였다. EDX 매핑으로 Ti 원소가 복합분체의 내부에 전체적으로 분포하고 있음을 확인하였다. Porosimetry 분석으로 기공사이즈 및 공극률을 측정하였으며, $TiO_2$ 나노입자를 함침하고 있음에도 불구하고 50% 이상의 공극률을 유지하여 흡유량이 매우 뛰어남을 확인할 수 있었다. 결론적으로, $TiO_2$ 나노입자가 PMMA입자의 내부에 잘 분산되어 있어서 가시광선의 반사율을 증가시킴으로써 피부의 결점을 커버하는 성능이 개선되었음을 확인하였다.