• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.462-467
• /
• 2013

In this paper, we analyzed the effects of doctoring process on the patterns of Ag ink in gravure off-set printing. The parameters of doctoring process were the angle and the pressure, which was represented by the depth of blade movement to the gravure roll, of doctor blade to the surface of gravure roll, and the angle of patterns engraved on the gravure roll to the doctor blade moving direction. The proper parameters were extracted for the fine patterns and they were 15 mm for the pressure, $60^{\circ}$ for the blade angle. And the angle of patterns with respect to the blade movement should be less than $40^{\circ}$ for the best results. The gravure off-set printing with the above parameters was carried out to print gate electrodes and scan bus lines of OTFT-backplane for e-paper. The line width of $50{\mu}m$ was successfully obtained. The thickness of electrodes was $2.5{\mu}m$ and the surface roughness was $0.65{\mu}m$ and the sheet resistance was $15.8{\Omega}/{\Box}$.

• Archives of design research
• /
• v.14 no.4
• /
• pp.157-165
• /
• 2001

The method to make ceramic pigments for 4 colour instead of ink in the process of the of set-printing and put them on the decal paper in the ceramic industry has been used to produce complicated images such as photographs or famous masterpieces. Offset-printing which is the production method for mass production, had enough worth to suffer the past high price of the production line. But today it is not suitable for the production method of small quantity and many kinds corresponding to needs for the various tastes and designs of consumers. Therefore I will put 4 colour printing method on the silkscreen, handiwork, suitable for the production method for small quantities and many variations to develop the methods that permit to cost effectively reproduce complex, high resolution, multicolor images. The study is expected to give value to ceramists who do various works and to be offered as the foundation in the field of design and expression.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.263-272
• /
• 2013

Printed electronics creates electrically functional devices by printing on variety of substrates. Printing typically uses common printing equipment or other low-cost equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography and inkjet. Compared to conventional manufacturing of microelectronics, printed electronics is characterized by simpler and more cost-effective fabrication of high and low volume products. Now there is huge effort towards printing many other more functional components, from displays to transistors to photovoltaic cells, using the full range of printing technologies - from inkjet to roll to roll analogue print techniques. The market for printed electronics will rise from $1.99 billion in 2010 to $55.10 billion in 2020. In 2030, this industry could be $300 billion - larger than the silicon semiconductor industry - from lighting to displays[8].

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.1-19
• /
• 2012

According as gradually increasing the demand for eco-friendly at the printing process, it has been progressed fairly development. Especially, the inks are used by soy oil beginning of ink industry for preventing environment, it is possible to make eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents at all for preventing environment. These eco-friendly inks have a benefits they are able to use the renewable resource. But basically vegetable oils have that reduce the VOC(Volatile Organic Compound) and high viscosity, high solubility properties. So if the vegetable oils use in the ink, set off problem occur on the paper because of slow drying time. In case of vegetable ester, it has similar the molecular weight and kinetic viscosity with hydrocarbon solvent, it is able to control the power of dilution about the resin. So, it has benefit that solve the problem of the existing eco-friendly inks. In this study, different types of ester were made by six types of vegetable oils and used ester in the varnishes and inks properties are comparison with hydrocarbon solvent based ink. By considering the intrinsic properties of vegetable oil, ester used to analyze the changes in ink properties, using ester varnish is applied to study the rheology characteristics and emulsification with inks.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.133-146
• /
• 1996

Eastman Kodak Co. has announced the concept of photo CD System in September, 1990 With Photo CD System technology, Kodak Co. Furnishes a convinent way to view, use and store photographic images. The heart of this system is a format provides progressively higher levels of image quality to meet the demands of NTSC, PAL and HDTV video displays as well as hard copy output. Also, image professionals are instrested in the capability of Photo CD, such as a way to store image at low cost in a high-resolution digital format that can be played back on different computer platforms. Many editors wish to use Photo CD images in the printing and publishing industry. However, Photo CD images were not processed detail enhancement and some others to use in the lithographic offset printing. Therefore, in this paper discribes a method to improve the sharpness of Photo CD images.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1144-1149
• /
• 2008

Converting technology has developed to print information for the decades. Recently, this technology (like gravure, gravure-offset) is rising as an alternative way for mass production of printed electronics such as RFID, solar cell. For the width of printing line is under 10 microns, registration error should be minimized less than several microns. Tension disturbance is main cause of registration error and this should be minimized before the substrate is transported into printing zone. With PI controller, it is possible to suppress the disturbance within 2% of operating tension. But register error appears more than 10 micron using PIcontroller considering noise. So LQG controller is needed as an alternative control method. In this paper, the comparision of PI and LQG controller in the converting machine including measured noise and tension disturbance is presented. It is shown that the LQG controller is more suitable for precision tension control in printed electronics.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.1
• /
• pp.42-54
• /
• 2001

The combination of a silicone surfaced plate and high viscosity ink produced a waterless printing system that worked well, but had limitation. The limitation was that this system was restricted to relatively short run lengths. In the waterless printing process, the press tended to heat up rapidly. Heat in turn, broke down the resins in the inks, causing them to become more fluid. When the ink is heated, the viscosity will drop, the ink will become too liquid and the plate will no longer be able to resist it. The ink will adhere to the non-print portions of the plate, and will print as a very fine mist or speckle pattern in the non-image area. On the other hand, when the ink gets too cold, viscosity will increase until ink transfer is impeded. This study carried otu to investigate the effect of temperature variations of the inks on the print quality in waterless lithography and to examine the adaptability of waterless lithography to conventional offset press without cooling system.

• Proceedings of the Korean Printing Society Conference
• /
• 1995.11a
• /
• pp.4-8
• /
• 1995

본 실험에서는 최근 급 신장된 국내신문인쇄의 윤전지절에 관해 지절발생수준 및 원인에 관해 분석하였다. 국내 신문사의 윤전지절 발생수준은 구미수준이며, 자동계지 (Autopasting)시 지절이 많았다. 전체적으로 국내 신문인쇄정비기술 및 장력수준은 양호하나 전기적친 정비기술, 신문사란 통일된 관리기법이 요구된다. 종이물성측면에서 기존의 인장, 인열강도 등의 관리로는 미소의 상관성 또는 부분상관성으로 전체적인 지절예측에는 한계가 있으며, 인열강도를 현실성있게 표현한 Fracture Toughness(FT)가 상관관계가 있음을 보여주었다. 또한 마찰계수 역시 지절상관성이 기대되는 물성임을 알 수 있었다. 윤전지절은 인쇄기의 불안정과 종이결함이 복합된 결과로 인쇄기의 안정성유지와 종이의 결함을 최소화하는 것이 필요하다. FT와 마찰계수를 이용한 관리기법으로 지료조성 및 펄프의 개질, 초지공정에 응용하여 최적강도 포인트를 찾아야 할 것이다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.04a
• /
• pp.54-69
• /
• 2003

Print gloss is an important attribute of the final printed product. While past work has looked at the influence of key aspects of the coating structure on print gloss, a systematic study has not been reported. The coating roughness, porosity, and pore size are changed by using various combinations of coating materials and by calendering against rough plastic sheets. The print gloss is measured every tenths of a second right after printing, a few minutes after printing, and a few days afterwards. Roughness and porosity affect the print gloss for the first two seconds: this result shows that they influence the ink-film splitting event. Once ink film starts to level, roughness and pore size influences the level of print gloss within the first ten seconds after printing. Porosity modifies the evolution of print gloss for the next few minutes. The decrease in gloss at long times is found to correlate to surface roughness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.25-30
• /
• 2007

Recently the use of web offset printing has been increasing, which can provide high print speed, mass production, and high print quality. However, high speed web offset printing has frequently undergone a blistering problem when the printed paper passes through hot air dryers. Blistering occurs in the middle of the base paper or in the coating layer. This paper focused on the blistering occurring in the base paper. In order to elucidate the effect of pigment ratio on blistering, 6 types of coating color were prepared with varying GCC/clay ratios and printability and blistering were investigated focusing on structure changes in the coating layer. When the clay content in the coating layer was increased, surface roughness and surface strength were decreased and paper gloss was increased. In addition, it was found that the coating layer structure with high clay content, which contains lots of discontinuous pores, hindered water vapors to penetrate out and, as a result, blistering occurred.